3M Bare - Metal Seam Sealer, 08310, Beige Color, Two-Part, Non-Sagging, Self-Mixing Epoxy, 200 ml/6.75 fl oz Cartridge Epoxy Beige

Brand:3M

3.8/5

€
90.47

"3M™ Bare Metal Seam Sealer 08310 is a tough, flexible sealing material formulated for sealing bare metal joints, such as steel or aluminum, as well as primed or painted metal in collision repair. Two-part, self-mixing epoxy sealer can be easily caulked, tooled or brushed into seams and cures in as little as 15 minutes. It features a neutral beige color. Use with 3M™ Performance Manual Applicator 08117, 3M™ Manual Cartridge Applicator 08571 or 3M™ Performance Pneumatic Applicator 09930 (sold separately). Cure Time: 1 Hour Handling Time: 1-10 Minutes Work Time: 10 Minutes Paint Time: 15 Minutes"

Amount

Add to Cart Buy now

EAN: 0051135083109

Categories Home & Kitchen, Kitchen & Dining, Small Appliances, Specialty Appliances, Vacuum Sealers,

For industrial/occupational use only. Not for consumer sale or use. NEUTRAL BEIGE: Color can reduce painting material and time. FAST-SETTING: Cures in as little as 15 minutes for efficient shop time. HEAVY-BODY FORMULA: Non-sagging for clean, efficient tooling in vertical and horizontal seams. SPECIALLY FORMULATED: No shrinking, cracking or outgassing. TWO-PART EPOXY: Sealer forms a tough, flexible seal for bare metal joints.

Brand	3M
Color	Beige
Country of Origin	USA
Department	unisex-adult
Is Discontinued By Manufacturer	No
Item model number	08310
Item Weight	6.75 Ounces
Manufacturer	3M
Material	Epoxy
Product Dimensions	12 x 9.63 x 5.38 inches; 6.75 Ounces
Style	Epoxy

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: john g.

as described

good price fast delivery

Scritto da: XDAEDAEX

Does the job

Worked its purpose

Scritto da: snatch

Great product if used correctly

I used this for sealing drip rails on a Ranger... very pleased with the results. It does self level quickly and evenly and looks great. I used about 1/2 of the 200ml tube for both sides and probably put in quite a bit more than the factory did...but one tube would easily do both drip rails on a full size truck I think. Since it is self levelling you must dam up the ends with masking tape and make sure the surface itself is level... and plan to grind out some of it on the ends, easily done with a small file. Overnight cure is better, the data sheet says paintable within a short period but it was still a bit tacky after an hour... rock hard the next day and very easy to finish the ends.

Scritto da: Jan

Very "epoxy" like. It's an epoxy after-all

Not sure about self-leveling, was expecting something more "fluidy", the viscosity and stickiness is just like honey and as a matter of fact - as epoxy :). It's likely great glue for gluing separate pieces, but not great for filling voids, due to low viscosity and high stickiness. The nozzle with the cartridge is bulky and exponentially grows with the gun, so not great for tight spaces. The proprietary gun is another story for itself... Should have gone with a smaller package with a thumb applicator instead...

Scritto da: chad caro

Great product

Worked as it should

Scritto da: Max Power

Bought to replace seam sealer on the drip rails of ...

Bought to replace seam sealer on the drip rails of a 71 Chevy pickup. Make sure you level the vehicle - mask off areas you don't want this stuff on and PEEL off the tape ASAP before it sets up or it is there forever (and trying to peel it from under sealer will result in sealer getting pulled up as well). You cannot use this on vertical sections as it flows for at least five minutes before it begins to set up. Ended up buying the heavy bodied seam sealer (3M 8303) to do the vertical sections first (along with a few spots on the firewall & cowl) then used the 08307 for the level areas (came out glass smooth). Wear gloves - it is messy if you are not careful.

Scritto da: Max Power

Bought to replace seam sealer on the drip rails of ...

Scritto da: Inland Classic Auto LLC

Spot on

Sticks well to bare metal. Quick drying