AprilAire 5845 Humidifier Installation Kit for AprilAire Whole Home Fan Powered Humidifier with Manual Control, Compatible with AprilAire Humidifier Model: 700M

Brand:Aprilaire

3.3/5

€
147.15

This AprilAire 5845Z Humidifier Installation Kit contains all components for step-by-step installation of an AprilAire Whole Home Fan Powered Humidifier with Manual Control, Model 700M. Convenient kit saves you time and money over purchasing supplies individually. AprilAire introduced the first evaporative humidifier for forced air furnace systems back in 1954. Since that time, AprilAire continues to lead the industry in whole home humidification systems. Our evaporative humidifiers work by piping water into the distribution tray located at the top of the humidifier. The water is uniformly distributed across the width of the tray and through a scientifically designed system of outlets. It flows by gravity over the Water Panel evaporator. Dry, hot air from the HVAC system is moved through the moisture-laden Water Panel evaporator. Natural evaporation takes place, meaning the water is turned to vapor, and the humidified air is circulated throughout your home. WHAT'S IN THE BOX? Model 50 Current Sensing Relay (24V) 10-feet of 18/2 Thermostat Wire (4) Twist-On Wire Nut Connectors 25-feet of 1/4-inch OD Supply Tube 10-feet 1/2-inch ID Drain Tube 5/8-inch Hose Clamp (4) #8 x 1-inch Self-Drilling Screws

Amount

Add to Cart Buy now

EAN: 0686720004049

Categories Industrial & Scientific, Appliances, Large Appliance Accessories, Humidifier Parts & Accessories, Accessories,

HUMIDIFIER ELECTRICAL COMPONENTS: AprilAire Current Sensing Relay Model 50, 18/2 Thermostat Wire (10 ft.) connects Manual Control (Humidistat) to Humidifier, and (4) Twist-On Wire Nut Connectors. HUMIDIFIER PLUMBING COMPONENTS: ¼" outside diameter (OD) Water Supply Tube (25 ft.) connects Humidifier to a water source, ½" interior diameter (ID) Drain Tube (10 ft.) connects Humidifier to floor drain, and ⅝" Hose Clamp fastens Drain Tube to drain connection. HUMIDIFIER MOUNTING COMPONENTS: (4) #8 x 1-inch Mounting Screws attach Humidifier to furnace air supply or return duct. COMPLETE INSTALLATION KIT: No need to find the parts yourself! This kit contains all components for installation of an AprilAire Whole Home Fan Powered Humidifier with Manual Control, model 700M. Reference installation instructions and template included with every AprilAire Humidifier before installing. BUY WITH CONFIDENCE: This genuine AprilAire Humidifier Installation Kit was designed and manufactured in the USA by AprilAire – the inventor of the Whole Home Evaporative Humidifier, and the leader in Indoor Air Quality solutions, to optimize installation of AprilAire Whole Home Fan Powered Humidifiers with Manual Control.

Brand	Aprilaire
Color	Black
Country of Origin	USA
Item model number	5845Z
Manufacturer	Research Products Corporation
Model Name	Humidifiers Parts and Accessories
Product Dimensions	0.5 x 120 x 0.5 inches; 2.25 Pounds
Product Dimensions	0.5"D x 120"W x 0.5"H
Special Feature	Whole-Home Humidifier Installation Kit

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Conic

Really good kit but more than I need.

This kit comes with a Current Sensing Relay and 18/5 wire I did not need for my installation. The installation instructions that came with my humidifier comes with several options and I carefully followed one of the recommendations. The kit also includes plastic tube for the water feed. Although the tube is rated for up to 160F, the instructions on the saddle valve that comes with the humidifier specifically says not to use plastic tubing. I went with copper just to be sure but do suspect the plastic in the kit would be fine. By buying just what I needed, I saved over 1/2 the cost of the kit.

Scritto da: J. Scholz

Made installation a breeze

This kit is a timesaver if you are looking to install your own humidifier. I am a "handy guy" and can do my own work but this was a little more daunting - cutting a breadbox-sized hole in one's cold air return plenum is a bit...harrowing. But, using the proper tools, safety gear, and taking my time with measurements and cuts, I succeeded in installing the body humidifier with relative ease. The current-sensing relay isn't well described in function: what it does is detects when your furnace blower fan starts by sensing the current in the neutral wire of the fan's furnace connection. The relay must be kept away from other magnetic fields and metal. I find it was easy enough to mount out of the way of mechanicals. The wiring given isn't quite enough for my needs. Get another 25 or 50 feet of wiring for anything beyond humidifier to transformer to relay wiring. The water tubing was much more than I needed. The provided hardware was of excellent quality.

Scritto da: AmazonCustomer

Cheaper to just by the parts you need

The title says it all.

Scritto da: Steve

This is a great product that was very simple to install

This product is used to put humidity into the air through your whole house and it works perfectly. If you are at all handy, It is very easy to install

Scritto da: Craig Carpenter

Garbage. Water line leaks.

Plastic water line will cause compression fitting to twist and leak EVERY TIME because the plastic line is softer than copper. I've gone through a handful of compression rings. I gave up. Buying copper. Do NOT Buy this overpriced garbage kit. UPDATE: since Amazon does not allow returns once you use any portion of this kit, I contacted AprilAire. I felt I deserve a little compensation. They told me, "We didn't sell it so we don't give any compensation or returns.". Basically, they do not guarantee their kit in any way. Total disregard for quality or customer satisfaction. I'll never buy another AprilAire product.

Scritto da: Michael

Get copper instead!

I ordered this manufacturer kit for my Aprilaire 700M. However, the included PEX supply line would not connect to the Aprilaire, using the parts included, without leaking. Because the connection to the valve is so deep, the line deforms, the compression ring twists, and then it leaks. I went through 3 compression rings, before giving up and buying 1/4" copper tubing. I wish I had just started with copper, it would have saved me 2 hours and an extra trip to the hardware store. At any rate, this kit is ridiculously over-priced. It's a disappointing offering from an otherwise solid company.