Armacost Lighting 213413 Led Puck Light, Soft White

Brand:Armacost Lighting

3.7/5

44.39

The Armacost Lighting PureVue Dimmable LED Puck Lights are the perfect solution for taking your accent lighting to the next level. The all metal design measures only 5/8-in thick, making the puck lights an ideal solution for surface mount fixtures or as a recessed flush mounted, ultra-thin downlight. The PureVue LEDs are extremely energy efficient, consuming only 4 watts per LED puck light. The lights produce about 375 lumens of light or roughly that of a 40 watt incandescent bulb. Thanks to its PureVue diffusion technology, visible LEDs and spotted countertop reflections are eliminated. With no bulbs to change and maintenance-free operation, expect reliable use for years to come.

Amount
Add to CartBuy now
Linkable Design: The PureVue Led puck lights are sold individually and can be linked with other PureVue’s and/or other component based Armacost Lighting products like RibbonFlex Pro Tape Light; Requires low voltage power source (sold separately). High Quality Design: the modern metal design is constructed using Cree High Power XLamp ultra-bright, chip-on-board (COB) LED array technology, giving the lights enhanced brightness and longevity. Ultra-Bright: the PureVue LEDs produce about 375 lumens of light with a wide 120° beam angle; performance is comparable to a 40 watt incandescent bulb. Easy-to-Install: Each PureVue puck light comes prewired with a 36 in. color-coded power lead for easy direct wire connection, simply cut or extend cable to meet your installation needs (Lights are sold individually). Professional Quality LED puck lights: featuring industry leading lifespan and higher lumens output, these recessed lights are the perfect solution for architectural LED lighting, under cabinet lighting, display cabinets, downlighting, and commercial lighting projects.
Assembled Diameter ‎2.75 Inches
Batteries Required? ‎No
Brand Armacost Lighting
Brand ‎Armacost Lighting
Color Black Satin
Color ‎Black Satin
Control Method ‎App
Customer Reviews 4.6 4.6 out of 5 stars 41 ratings 4.6 out of 5 stars
Cutting Diameter ‎2.75 Inches
Finish ‎Brushed
Finish Type ‎Brushed
Included Components ‎1 Trim Ring, 1 LED Puck Light
Item model number ‎213413
Item Package Quantity ‎1
Item Weight ‎0.2 Pounds
Item Weight ‎3.2 ounces
Light fixture form Recessed
Light fixture form ‎Recessed
Light Source Type ‎LED
Luminous Flux ‎375 Lumen
Manufacturer ‎Armacost Lighting
Material Aluminum
Material ‎Aluminum
Mounting Type ‎Under Cabinet
Number of Items ‎1
Number of Light Sources ‎1
Part Number ‎213413
Plug Format ‎A- US style
Power Source ‎DC
Product Dimensions ‎2.75 x 0.75 x 2.75 inches
Product Dimensions ‎2.75"L x 0.75"W x 2.75"H
Shade Material ‎Metal
Shape ‎Circular
Special Feature ‎Energy Efficient
Special Features ‎Energy Efficient
Style Modern
Style ‎Modern
Usage ‎Indoor use only
Voltage ‎12 Volts
Warranty Description ‎Limited 3-year warranty.
Wattage ‎4 watts

3.7

8 Review
5 Star
75
4 Star
12
3 Star
13
2 Star
0
1 Star
0

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Traci
Sexy
These appear to be built very well. They put off the perfect amount of light i used them in upper cabinet lighting with clear glass doors. Please note i did have some issues with my drivers using them for 24 volts so i had to wire them series parallel to get my driver to accept function with them. You may experience the same technical issue
Scritto da: Bonnie L. Kaliko
Modern Upgrade
Updated a 34 year old curio cabinet and changed out the old light for this light. Added a dimmer and timer for a great look.
Scritto da: Dan F
Solid lights overall, but heads up on the flush mount install
I bought 4 of the black 2700k puck lights and opted for a flush install. The way the flush mount works is there are 3 rigid metal clips that screw on the top of the unit to hold the light in place from the top of the cabinet. I cut the holes in my cabinet with a 2 1/8" inch hole saw and found that the metal flush mount clips were just too rigid to bend enough to allow the puck light to slide into the hole and to be installed from the inside of the cabinet. I thought maybe I could get it to go if I really pushed hard, punched it, or if I smacked it firmly with a rubber hammer, but I didn't because I figured the light would break or bend. But luckily I had access to the top of the cabinet so I slid the unit in with no clips at first and then screwed the clips from the top outside of the cabinet. That worked perfectly, nice and snug. If you can't get access to the top side of your cabinet to screw the clips in then I HIGHLY RECCOMEND YOU TEST FIT THE FLUSH MOUNT ON A SCRAP SURFACE BEFORE YOU DRILL YOUR CABINET just incase you can't get it to fit either. It would be a disaster to cut the 2 1/8" hole and then switch to the puck mount install method which would only need a very small hole to be drilled for the wire to slide through. As far as quality, not too bad! The flush mount looks really good in my glass door cabinets. At the lowest dimmer settings one of my units is very noticeably dimmer than the other 3 but then matches brightness once I get up to 20% or higher. Also, I'm powering these on the same power supply with an LED strip under the same cabinets. At the highest power settings the LED strip appears to over power the brightness of these puck lights but does balance better at mid power levels. Perhaps if you were pairing these with LED strips you should go with high intensity LED strips only if you need task lighting but then maybe stick with less intensity LED strips if you just need accent lighting, which is my setup. Looking forward to enjoying these!
Scritto da: Birdman
uneven light output
Solid and sturdy product. Looks nice and installs easily. However half of the lights are dimmer than the others. It is not a power supply or wiring issue, it is the individual lights themselves. Used an armacost dimmable constant voltage power supply and wired lights in parallel, yet some were dimmer than the others. Unhooked the bright lights to see if they somehow were robbing current from the other lights, but the dim lights just stayed dim. Tried each light individually and found that bright lights were still bright and dim lights were still dim even though no other lights were hooked up to the power supply. Faulty lights themselves. I like the look so it would be nice if they were all uniform in lighting.
Scritto da: SomeoneLikeYou
High quality end product
Incredible quality. I rarely leave reviews and am very (very) particular though the Armacost LED pucks and dimmer module are impressive enough to warrant a five star review. Packaging, build quality, product consistency, legible instructions...all top notch. Cost is higher than plastic competition and worth every penny - time will tell the reliability story but all signs point to this being a great product line. Well done Armacost!
Scritto da: Laurence L.
Well made lights, easy to install
Used 10 of these lights for undershelf lighting in a home office installation. They look good and are quite bright so we have them on a dimmer which works out well. Had a problem initally when 4 of the lights came in bright white instead of warm white. Contacted Armacost custumer service and had a response within 15 minutes. They sent me new units to replace the incorrect ones. Very satisfied with the product and service.
Scritto da: Christopher Dean
Perfect size
So much better than the old style hot bulb ones. Installed with a Lutron smart wall plug. Now my wife loves to say Alexa turn on the hutch lights.
Scritto da: Phyllis D
LED Puck Light
worked great with a dimmer I bought. Used on bed night light.

Related products

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array