0
0

Total:€ 0.00

See cartCheckout
LoginRegister
0

Total:€ 0.00

See cartCheckout
LoginRegister

B&C Eagle A3X120HDR/22 Round Head 3-Inch x .120 x 22 Degree Hot Dip Galvanized Ring Shank Plastic Collated Framing Nails (500 per box)

Brand:B&C Eagle

3.7/5

€
98.74

PRODUCT DESCRIPTION Our fasteners work with many brands of pneumatic tools like Bostitch, DeWALT, Senco, Paslode, Duo-Fast, Hitachi, Makita, Porter Cable and more. If your tool model number is listed below and our fastener fits within the size range of your tool, our fastener will work. We use only high quality collation materials and glues to keep the fasteners together before and during use. Use B&C Eagle fasteners for more positive drives, fewer jams and lasting quality. Please make sure you select the right coating for your application. Bright fasteners should only be used for interior applications in non-treated lumber. Hot Dip Galvanized fasteners are for interior or exterior applications in treated lumber. For the best corrosion protection available, always use Stainless Steel fasteners. Visit our website at www.bandceagle.com or give us a call for more technical information or if you have any questions on our fasteners. ***As of July 1st 2013 we've updated all of our packaging. Buy with confidence that you will receive our product shipped from AMAZON.COM intact. *** These fasteners are ENGINEERED TO FIT: B&C Eagle: SN2283, SN2290, Bosch: SN350-20F, Bostitch: F21PL, N88RH, N88RH-2MCN, N90RHN, N95RHN, RN90, Campbell Hausfeld: NS209000AV, NS219099AV, DeWALT: D51844, D51845, D51850, Duo-Fast: 903000, CN-350B, DF350S, NSP-350F1, NSP-350F2, SNP83, Fasco: F5C RHN 20-90, F5C RHN 20-90A SS, F6 RHN 20-90, Hitachi: NR83A, NR83A2, NR83A2S, NR90AC, NR90AC3, NR90AE, NR90AEPR, NR90GR, Makita: AN8300, AN922, AN923, Max: GS683RH, GS683RH-EX, SN80, SN883RH, SN890RH, SN90, Paslode: 5325 SRH, 5350 SRH-20, Porta-Nails: 660, Porter Cable: FR350, FR350A, FR350B, FR350MAG, Ridgid: R350RHA, Senco: FRAMEPRO 502, FRAMEPRO 600 , FRAMEPRO 602, FRAMEPRO 650FRH, FRAMEPRO 652, FRAMEPRO 700XL FRH, FRAMEPRO 702XP, FRAMEPRO 752XP, GT90FRH, SN60, SN65, SN65C, SN902XP, Spotnail: NPR90, YPR90, WEN: 61790, 61792, 91232. PLEASE CONSULT YOUR TOOL OWNER'S MANUAL FOR SIZE RANGES. For the most up to date list of tools this fastener is compatible with, please visit our website at www.bandceagle.com FROM THE MANUFACTURER The B & C Eagle A3X120HDR/22 3-Inch 20 to 22 Degree Framing Nails are hot-dipped galvanized and packed in small, 500-quantity boxes for convenience. These 3-inch framing nails can be used with the following nailers: Hitachi NR83A, NR83A2, NR90AC; Duo-Fast CN350; Senco SN60, 1B003N, SN65; Makita AN8300; Porter-Cable FR350, FR350MAG, and SN890RH; DeWalt D51844, D51845; and Max SN890RH.

Amount
Add to CartBuy now

EAN: 0649853991099

Categories Industrial & Scientific, Nails, Screws & Fasteners, Collated Fasteners, Collated Nails, Framing Nails,

New and improved packaging helps protect product during shipment. Full round head. Hot dip galvanized coating resists corrosion and rust. For interior and exterior use. Rated for use in treated lumber. Plastic collated ring shank. For use in 20 to 22 degree plastic collation framing nailers.
Assembled Diameter ‎3 Inches
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 226 ratings 4.6 out of 5 stars
Cutting Diameter ‎3 Inches
Domestic Shipping Item can be shipped within U.S.
Head Style ‎Round
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item model number ‎A3X120HDR/22
Item Package Quantity ‎1
Item Weight ‎5.2 pounds
Manufacturer ‎B & C Eagle
Material ‎Plastic
Measurement System ‎Inch
Part Number ‎A3X120HDR/22
Product Dimensions ‎4 x 8.5 x 3 inches

3.7

11 Review
5 Star
78
4 Star
14
3 Star
3
2 Star
1
1 Star
3

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Ric
Feeds Well
…with no mis-feeds. did the job.
Scritto da: Jack Thomas
Product was missing some items
The box was missing 25 nails of 500
Scritto da: Wise Reader
Spoke to manufacturer - they are indeed hot dipped galvanized
I was concerned when I received these nails that they were not HDG. As others have mentioned, the shanks are shiny, except for about 3/8" at the head. So, I called the manufacturer and spoke with Dan, who explained that there are two processes of hot dipping: after the fastener is formed and of the wire before forming the nail. He told me that these nails are the latter, and are indeed certified for both outdoor use and use with treated lumber. He also mentioned that the colored coatings on the nails are for ease of driving--they heat up and act as a lubricant. I haven't used them for my project yet, but feel confident they will last.
Scritto da: Sandman...
Works in Harbor Freight 21% framing nailer (10 gauge, 2-3/8 to 3-1/4)
Fast shipping & will be ordering more from this seller.. Sandman...
Scritto da: R. Duncan
Good nails, worked well.
Good nails, worked well. No complaints
Scritto da: M. Donovan
Permanent Fastener
I discovered that these fasteners are the most sturdy way to build short of screws. I tried to pull a piece of plywood off of the side of my frame after putting a couple of these in and discovered how fantastically effective they are! I chose the ring shank for that attribute and I chose hot galvanized to ensure they would never corrode. They feed perfectly and drive consistently with my Numax Nail Gun. Great quality. I just bought two more boxes of them.
Scritto da: Amazon Customer
Plastic material holding nails
The plastic material that holds the nails together is too hard and when you use them the plastic material stays exposed on your project or decking and very hard to remove and very unsightly
Scritto da: Bowman Woods
good product
theses exceeded my expectations. totally satisficed.
Scritto da: Chuck Carter
These are not hot dipped, what you see is not what you get.
I bought a box of these nails because they are advertised and shown in the photo as hot dipped, they are not! The nails delivered are electro-plated. When the nails arrived I thought the manufacture put the wrong nails in the box so I re-ordered, The next box arrived exactly the same. I called B&C Eagle to find out what gives? and they said they didn't use a hot dip process to galvanize their nails. This is clearly a case of false advertising. I ended up using both boxes of nails because I couldn't wait any longer.
Scritto da: Alex
Yup
They nailed it !! Get it ! ????
Scritto da: Roman Wroczynski
Five Stars
Good product

Related products

hot
B&C Eagle A314X131RSS/28 Offset Round Head 3-1/4-Inch x .131 x 28 Degree S304 Stainless Steel Ring Shank Wire Collated Framing Nails (500 per box)
3.9/5

€ 169.30

B&C Eagle A314X131RSS/28 Offset Round Head 3-1/4-Inch x .131 x 28 Degree S304 Stainless Steel Ring Shank Wire Collated Framing Nails (500 per box)
3.9/5

€ 169.30

hot
B&C Eagle A314X131/33 Offset Round Head 3-1/4-Inch x .131 x 33 Degree Bright Smooth Shank Paper Tape Collated Framing Nails (500 per box)
3.6/5

€ 84.84

B&C Eagle A314X131/33 Offset Round Head 3-1/4-Inch x .131 x 33 Degree Bright Smooth Shank Paper Tape Collated Framing Nails (500 per box)
3.6/5

€ 84.84

hot
B&C Eagle 314X131RSS/22 Round Head 3-1/4-Inch x .131 x 22 Degree S304 Stainless Steel Ring Shank Plastic Collated Framing Nails (1,000 per box)
2.4/5

€ 402.76

B&C Eagle 314X131RSS/22 Round Head 3-1/4-Inch x .131 x 22 Degree S304 Stainless Steel Ring Shank Plastic Collated Framing Nails (1,000 per box)
2.4/5

€ 402.76

hot
B&C Eagle A314X120HDR/22 Round Head 3-1/4-Inch x .120 x 22 Degree Hot Dip Galvanized Ring Shank Plastic Collated Framing Nails (500 per box)
3.6/5

€ 93.24

B&C Eagle A314X120HDR/22 Round Head 3-1/4-Inch x .120 x 22 Degree Hot Dip Galvanized Ring Shank Plastic Collated Framing Nails (500 per box)
3.6/5

€ 93.24

hot
B&C Eagle A3X131/33 Offset Round Head 3-Inch x .131 x 33 Degree Bright Smooth Shank Paper Tape Collated Framing Nails (500 per box) 1 X 500 per Box
3.7/5

€ 80.72

B&C Eagle A3X131/33 Offset Round Head 3-Inch x .131 x 33 Degree Bright Smooth Shank Paper Tape Collated Framing Nails (500 per box) 1 X 500 per Box
3.7/5

€ 80.72

hot
B&C Eagle A212X092HDPC Round Head 2-1/2-Inch x .092 x 15 Degree Hot Dip Galvanized Smooth Shank Plastic Collated Coil Framing Nails (800 per box)
3.1/5

€ 73.83

B&C Eagle A212X092HDPC Round Head 2-1/2-Inch x .092 x 15 Degree Hot Dip Galvanized Smooth Shank Plastic Collated Coil Framing Nails (800 per box)
3.1/5

€ 73.83

hot
B&C Eagle A2X113HDR/33 Offset Round Head 2" x .113 x 33 Degree Hot Dip Galvanized Ring Shank Paper Tape Collated Framing Nails (500 per Box), 2" x 0.113" Galvanized Steel
3.8/5

€ 78.43

B&C Eagle A2X113HDR/33 Offset Round Head 2" x .113 x 33 Degree Hot Dip Galvanized Ring Shank Paper Tape Collated Framing Nails (500 per Box), 2" x 0.113" Galvanized Steel
3.8/5

€ 78.43

hot
Metabo HPT Paper Tape Framing Nails | Hot Dipped Galvanized | Clipped Head | 2-3/8 Inch x .120 | 2000 Count | 15131MHPT
4/5

€ 175.59

Metabo HPT Paper Tape Framing Nails | Hot Dipped Galvanized | Clipped Head | 2-3/8 Inch x .120 | 2000 Count | 15131MHPT
4/5

€ 175.59

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array

Total:€ 0.00

See cartCheckout

Categories

All the categories
Menu Categories Near Cart

Menu