BOSCH FSNWAN Track Miter Guide

Brand:BOSCH

2.9/5

189.54

This Track Miter Guide is an accessory to align BOSCH track-saw tracks on the workpiece at precise, accurate angles. By placing the pivot arm of the BOSCH FSNWAN miter accessory against the workpiece, the user can pivot and lock a short built-in piece of track to the desired angle (up to 60° left and 45° right). The guide’s track is designed to connect with another BOSCH track (sold separately), using the FSNVEL Track Connector (also sold separately). The BOSCH Track Saw, along with the tracks, can make a more-easily transportable alternative to a table saw to a jobsite. The cuts are table-saw quality, with virtually no splinters.

Amount
Add to CartBuy now
Top-side connection to tracks – designed to connect and lock from the top of the track, precluding having to flip the track over, unlike some competitor tracks. Quick Connection – tracks can be joined quickly and easily with the fsnvel connector (sold separately). Miter cuts 60° left and 45° right – a short built-in piece of track pivots and locks at the desired angle (up to 60° left and 45° right). Pivoting fence arm – aligns the guide with the leading edge of the workpiece. Track miter guide design – engineered to allow fast miter cuts with the Bosch track saw and the track saw system.
Batteries Required? ‎No
Brand BOSCH
Customer Reviews 3.8 3.8 out of 5 stars 11 ratings 3.8 out of 5 stars
Cutting Angle 60 Degrees
Included Components (1) Track Miter Guide with Fence
Included Components
Item model number ‎FSNWAN
Item Package Quantity ‎1
Item Weight 1.11 Pounds
Item Weight ‎1.11 pounds
Manufacturer ‎Bosch
Part Number ‎FSNWAN
Product Dimensions ‎1.5 x 9 x 19 inches
Thickness ‎11 Inches
Warranty Description ‎1-Year Warranty

2.9

5 Review
5 Star
37
4 Star
28
3 Star
24
2 Star
0
1 Star
11

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Glen E Thomas
Expensive Bosch accessories, worth the investment
The ability to accurately make cross cuts with my track saw typically requires meticulous measurements and a square of some type. Using this miter guide allows me to make accurate square 90 degree cuts on sheet goods and small boards. The ability to make other angle cuts accurately is an added bonus. This is a fairly expensive accessory but well worth the investment providing another lever of use for my track saw.
Scritto da: Stefan Brunner
Miter in a pocket
The FSNWAN attachment allows you to make miter cuts with your Maffel rail-compatible track saw. I use it while building in the attic as it is more convenient than running outside to the big miter saw. You can also extent the miter guide with any of the Bosch FSN or Mafell rails to cut angels in sheet-goods. As the other Spanish reviewer noticed, you need a connector which is not included if you extent the miter guide with another rail piece. Track-saws and their accessories are expensive. but once you own one, you do not want to miss it. The tracks can also be used with other compatible tools such as jig saws and routers. As a background, there are essentially two standards for rails, and both are from Germany: the Mafell one (Bosch licenses and is 100% compatible) and Festools. All other rails systems are knock-offs of either one of these two rail systems, mostly then one from Festool and are compatible to varying degree to these.
Scritto da: Michael Baranov
You can make it work, just be aware of what this tool is and is not
Scale is somewhat imprecise. Even the notch won't give you precise 90. It's just so slightly off you never notice with naked eye. I have to lock it against a known good carpenter's square for precise 90. Once locked, the setting remains in place securely and does not drift. Works very well for breaking down sheet goods to rough size. I would probably not trim panels to final size/angle with this unless I have nothing better available to me (panel trimming jig for table saw, slider table saw etc.). For the record I would not use a track saw anywhere I could safely use a table saw. If you plan to use this on the floor, get at least 1" thick foam board under your sheet - this jig requires a bit of space below the sheet for the cross bar and a locking nut and won't work with 1/2 foam sheet in most cases.
Scritto da: Lord vicious
Incompleta
Algo que es extremadamente molesto, es que compres una accesorio como este que podríaaaaa ayudarte en gran manera y no lo puedes usar porque requiere otro accesorio mas que es el conector negro "FSN VEL"para unir la guia con esta escuadra, el cual su costo es de $1,400 pesos!!!! Por una pieza pequeña que DEBERIA INCLUIRLA. Asi que si vas a comprarla compra el conector "FSN VEL"
Scritto da: Amazon Customer
Great for angles
Really is a sturdy piece of tool. Makes precision angles and cuts repetitively. Worth every penny.

Related products

hot
Metabo HPT 375824 RIP FENCE C10RJSM
3.6/5

€ 83.18

Metabo HPT 375824 RIP FENCE C10RJSM
3.6/5

€ 83.18

hot
Big Horn 19838 ProGrip Bandsaw Fence
3/5

€ 107.49

Big Horn 19838 ProGrip Bandsaw Fence
3/5

€ 107.49

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array