CURT 56245 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Chevrolet Traverse, GMC Acadia, Buick Enclave

Name: CURT 56245 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Chevrolet Traverse, GMC Acadia, Buick Enclave
Brand: CURT
SKU: 0612314562459
Price: 69.70 EUR
Availability: InStock

Brand:CURT

3.8/5

€
69.70

CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Chevy Traverse, GMC Acadia and Buick Enclave (factory tow package required; to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.

Amount

Add to Cart Buy now

EAN: 0612314562459

Categories Automotive, Exterior Accessories, Towing Products & Winches, Hitch Accessories, Wiring,

DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements. EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging. VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Chevrolet Traverse, GMC Acadia and Buick Enclave (factory tow package required). STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a wide variety of trailers, adding versatile towing options for your vehicle. EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 574 ratings 4.7 out of 5 stars
Exterior	‎Smooth
Finish Type	Powder Coated
Is Discontinued By Manufacturer	‎No
Item model number	‎56245
Item Weight	0.44 Pounds
Item Weight	‎7 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56245
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎BKDK56245
Product Dimensions	‎9 x 4 x 2 inches
Vehicle Service Type	Marine-Personal-Craft, ATV, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Greg Monett

Long thin arms would help

I had to jack up the SUV, remove the rear passenger wheel and the lossen the fender liner. If I had thinner forearms it would have gone in easier, the product works as designed. Great wiring, along with fuses and relays.

Scritto da: Thomas Snook

Perfect fit, all needed fuses and relays included

This part is perfect, was difficult to instalk thanks to GM Corp. J needed to use included fuses and relays to get trailer lights to work. Highly recommend

Scritto da: Amazon Customer

The product is good and the instructions are pretty straight-forward

The product is good and the instructions are pretty straight-forward, but the wiring is a pain to connect to the wire harness of a 2014 GMC Acadia due to GMC's placement. The fuses and relays are simple to install and the instructions are clear. For the 2014 Acadia, the battery is in the floor behind front passenger seat (slide the front passenger seat all the way forward, open the rear passenger-side door, flip up the floor mat, remove the plastic cover under the passenger seat, and I think I used a t-20 torx bit to remove the screw holding the battery cover on, and then I used a 10mm socket to remove the negative battery cable). After removing several screws to the inner fender cover, you pry the cover to the side and you'll see the wiring harness inside, toward the rear. The harness is mounted to the cars body on a plastic "clip". The harness can be slid off of the clip to allow just enough movement to plug the Curt harness to it. Then I slid the harness back onto the clip, reattached the inner fender and reconnected the battery. I ran the Curt harness to the bumper mount and ran it inside the frame, and popped it out through the access hole for installing the hitch. Thinking baout it now, I probably need to wrap tape around it where it comees out of the hole to protect it from abrasion.

Scritto da: Jonathan

Great product

It was so easy to install and all the parts to install it were there ????

Scritto da: Phillip Brittain

Perfect for my vehicle

Worked perfectly

Scritto da: J Batey

Very easy install, but a bit pricey

I installed this on my 2017 Chevy Traverse. Very nice that the Traverse is prewired for this. The directions state that the rear wheel and wheel well cover need to be taken off. There's no reason to do this - just feel for the plug on the vehicle and attach it blind. There is only one plug in that location and it can only be inserted in one direction, so you do not absolutely need to see what you are doing. Save yourself the headache of removing what the directions state to remove! This is a nice wiring harness, but I do believe it is a little pricey for what you get, granted you do get all the relays and fuses that you need as well.

Scritto da: ARS

Worked perfectly.

Installed on my 2014 Chevy Traverse. It comes with good instructions. I followed them and it works perfectly on my boat trailer. Note it can be difficult to see the small numbers in the fuse box for each fuse you have to install so get in good lighting.

Scritto da: don campbell

Right turn /brake light quit working used it 2 times

It’s is hard to install because of where the manufacture of the car put it

Scritto da: Rob

Awesome fit and easy install!

Nothing that was listed from Reese for my 2014 Buick Enclave would fit. Curt had the solution and it was easy to install. Great product.

Scritto da: Amazon Customer

Worked

Fairly easy to hookup and use. Worked like a charm

Scritto da: Chris

price

I like this product it was perfect and came as described and the price was good.

Scritto da: Emily Kennedy

Perfect

Perfect for my 2016 Chevrolet Traverse LS! Plug and play, easy to install!

Scritto da: Marcel

Easy to follow instructions, plug and play connection

Just follow the instruction and the install will be easy and smooth! you will need to provide some of your own longer tywraps to secure wiring but no big deal.