Danco 88569 Rubber Flat Washer, 1/2-Inch, 10-Pack, Carded , Black 0.5"

Brand:‎Danco

3.4/5

24.96

PRODUCT DESCRIPTION Fix your leaking faucet with Danco’s flat faucet washers. Repairing a dripping faucet is an easy and inexpensive alternative to replacing the entire fixture. Flat faucet washers are used mostly on quick opening styles of faucets. The flat design allows a full flow of water, provides positive shut-off, abrasion resistance and temperature resistance. Danco’s flat faucet washers are a necessity for an DIY faucet repair. FROM THE MANUFACTURER Danco is one of the largest plumbing repair, replacement and remodel suppliers in the home improvement industry. We are largely focused on empowering Do It Yourself consumers with affordable plumbing products and solutions which create new and refreshing décors for bathrooms and kitchens.

No units available
10 flat washers per card. Designed to allow full water flow and provide a positive shut off. Use on “quick-opening” style faucets. High abrasive resistance and temperature resistance. Designed to withstand harsh chemicals. 00 trade size – 0.5 in. O.D. and 0.19 in. I.D. Tough, flexible rubber construction.
Assembled Diameter ‎0.5 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand ‎Danco
Certification ‎Not_applicable
Color ‎Black
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 1,329 ratings 4.4 out of 5 stars
Cutting Diameter ‎0.5 Inches
Domestic Shipping Item can be shipped within U.S.
Fastener Size 1/2
Fastener Size ‎1/2
Head Style ‎Flat
Included Components ‎Danco 88569 Rubber Flat Washer, 1/2-Inch, 10-Pack, Carded
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH ‎1 x 1.78 x 4.25 inches
Item model number ‎88569
Item Package Quantity ‎1
Item Weight ‎0.04 Pounds
Item Weight ‎0.64 ounces
Manufacturer ‎Danco
Material Rubber
Material ‎Rubber
Measurement System ‎Inch
Number of Handles ‎1
Number Of Pieces ‎10
Outside Diameter 1 Inches
Outside Diameter ‎1 Inches
Part Number ‎88569
Product Dimensions ‎1 x 1.78 x 4.25 inches
Size ‎0.5"
Thickness 1 Inches
Thickness ‎1 Inches
Voltage ‎120 Volts
Washer Type Flat
Washer Type ‎Flat
Water Consumption ‎2 Gallons per Hour

3.4

13 Review
5 Star
67
4 Star
16
3 Star
9
2 Star
2
1 Star
5

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Kenny G. Leigh
Great for PC fan installation
I got these to add my PC fans to the top of my Fractal Design Pop Air case. Works great. I wish the rubber was a little more flexible, but they got the job done.
Scritto da: Nelson
Perfect size for shut off valve maintenance
I purchased a house recently and noticed that most of the shutoff valves needed to be replaced, which could be quite pricy for 6 sinks and 3 toilets. After working through some possible solutions, I realized that the replacement stem kits don't work out very well, because the stem dimensions vary slightly with each vendor. Replacing the shutoff gasket and re-using the existing stem is far more reliable, while also being much cheaper than replacing the entire valve. One issue I ran into while doing the work is corrosion in the pipe and existing valve, which can tend to make it difficult to get a good fit for an OEM gasket matching to original size. Using a size smaller works better for doing the replacement. These gaskets were just about the perfect size. They are a hair smaller than the original, while still sealing off a half inch inlet. One request I'd like to make is that they make these in silicone. I find silicone remains pliable for ~20 years, so effectively would outlast the house. SBR or NBR rubber is organic and subject to oxidize, usually within about 5-10 years. Give me the exact same product made out of silicone, and it would be that much more perfect.
Scritto da: DS
As expected
Hubby said that the product is as expected
Scritto da: Project Guy
Worked well, note 1/2” is OD
I got these for an attic fan install. I didn’t realize the dimensions we OD not ID so I ended up using them on the screws which mounted the plywood board to the studs flanking the gable vent (instead of mounting the fan to the plywood for which I used bigger screws). My fan had rubber isolators anyway. First one shot out after I tightened down the screw with my impact driver. I leaned it was best to put a metal washer on the end of the screw to hold the washer in place. Worked after that. I was using #8 screws which fit the ID. I don’t think a bigger screw would get through the center without distortion/damage of the washer.
Scritto da: BJT
Sound bar noise suppression
I used these to stop our sound bar vibrating against the wall and it worked perfectly
Scritto da: Johny Howard
not rubber
Delrin, not rubber
Scritto da: Matt
Rubber washers
Easy to install. And they dampen the vibrations from the gable fan
Scritto da: K. Quaintance
Tiny
The are real small , and only work with a small bolt or screw.
Scritto da: Amazon Customer
soft robber
I changed it in my hot faucet and no water leaking more
Scritto da: Dan
Not 1/2 " !!!
Not as advertised
Scritto da: Amazon Customer
Incorrect product description. This is not what I needed.
These are NOT “rubber” washers. They are “nylon”. Received item but not as described.
Scritto da: Amazon Customer
ok product
ok product
Scritto da: Kamlesh
Waste Product
Not as mentioned in description...please dont buy.

Related products

hot

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array