EKLIND 92600 PSD Ball-Hex (allen) Precision Screwdriver - 6pc set Metric MM sizes 1.3-4

Name: EKLIND 92600 PSD Ball-Hex (allen) Precision Screwdriver - 6pc set Metric MM sizes 1.3-4
Brand: Eklind Tool
SKU: 0037516926005
Price: 43.55 EUR
Availability: InStock

Brand:Eklind Tool

3.2/5

€
43.55

EKLIND TOOL COMPANY is America's leading manufacturer of high quality, industrial grade hex keys, made with pride in the U.S.A. since 1950. The EKLIND 92600 PSD Ball-Hex (allen) Precision Screwdriver - 6pc set Metric MM sizes 1.3-4 meets the most stringent requirements of professional mechanics, tradespeople, do-it-yourselfers and hobbyists.

Amount

Add to Cart Buy now

EAN: 0037516926005

Categories Industrial & Scientific, Tools & Home Improvement, Power & Hand Tools, Hand Tools, Wrenches, Hex Keys,

Oil and chemical resistant. Sizes are permanently marked on cap. Precision machined tip. Rotating end caps. Egonomic handle offers comfort and control. FAST AND EFFICIENT- The EKLIND Ball-Hex keys work at up to a 30 degree angle for access to hard to reach socket-headed fasteners.EKLIND PSD- Precision Screwdrivers have precision machined tips, larger handles with a soft overmold for comfort and ergonomics and a large spinner cap for precise control with the size molded into the cap.IDENTIFY YOUR TOOLS- Metric sizes are color coded in blue so you can reach for the correct tool quickly.MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation. OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish. EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners. Contains MM Sizes: 1.3, 1.5, 2, 2.5, 3, & 4. MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.

Brand	Eklind Tool
Color	Multi
Country of Origin	USA
Department	Unisex-Adult
Domestic Shipping	Item can be shipped within U.S.
Head Style	Hex
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	92600
Manufacturer	TV Non-Branded Items
Material	Blend
Number of Items	6
Product Dimensions	1 x 13.06 x 3 inches; 4 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Joshua Bryan

Great tools

So I do a lot with 3d printers and was needing a good set of metric Hex set. They are a little long for th3e tight spots of printers, but for the main reason i got them they work great (direct driver and grub screws). They are really good for small size screws which is the big reason i wanted a good set. The only complaint is it comes in a plastic bag like case which is big for what these tools are, but i don't really care about that as they were just put in my 3d printer tool box. Well worth the purchase.

Scritto da: AK

Nice set of screwdrivers

They all work, correct size, plenty strong for my uses. Good buy.

Scritto da: happy Dad

This set wins my review of 4 driver sets. Large and nice feel.

I bought 4 sets of allen drivers and needed primarily the 1.5 to 3mm drivers. The summary: the EKIND 92600 precision set definitely is the best if you need small drivers. The small drivers in the EKLIND 90609 set come in second place, with the advantages of really nice bigger drivers as well. The Bondhus are best for 3mm+ drivers but worst for the smallest drivers. The Wiha drivers are OK but are all a little small for adult hands, and the sizes can't be read. The picture shows only the 1.5, 2, 3mm sizes of each set. The individual comments below are listed in the same order as the picture. EKLIND 90609 Ball-Hex (allen) Screwdriver - 9pc set Metric MM sizes 1.5-10 - Up to 10mm was a big plus for me. The bigger handles are really meaty and nice. The smaller ones are OK, not great but at least as good as all the others I tried. The sizes are printed on the side and a little hard to read. The balls can be cut on these to make "non-ball end" allen drivers. EKLIND 92600 PSD Ball-Hex (allen) Precision Screwdriver - 6pc set Metric MM sizes 1.3-4 - These are my favorite of the bunch by far. Rubber coating on the handles, large. A really nice feel in the hand, swiveling caps. If you need the smallest sizes, this is the best set of the bunch. The sizes are molded into the top of the cap. The sizes are OK but could be bigger. The ball ends can be cut off. Bondhus 10686 1.5-5mm Balldriver Screwdrivers, 6 Piece Set - The 1.5 and 2mm driver handles were too small to hold in anything but 2 or 3 fingers and in my opinion would certainly cause hand cramps if used for more than a few minutes at a time. It's also pretty much impossible to read the sizes printed on the sides of these. The 3mm and bigger sizes felt really beefy and nice in my hand; the 3mm and bigger sizes are the best feeling drivers of all these sets I listed here. The balls can be cut off to make "non-ball" drivers. Wiha 26491 5-Piece Ball Metric End Hex Driver Set - Nice quality but a little expensive and small for what you get. I think trying to assemble an entire R/C car with these would quickly result in hand cramps. The sizes are printed on the side but are wasted ink as they are impossible to read. The ball ends cannot be cut off on these but the end material may be nicer; hard to tell. EDIT: I am concerned about the other reviews that say these break or are rounded off. I haven't used these a lot. Keep in mind my intention is to cut off the balls and use them as straight shaft drivers.

Scritto da: Amazon Customer

Easy to use

When working on 3D printers the standard "L" hex wrenches are awkward to use at times and these work so much better for those tasks. I guess final torquing might need to be done with a "L" wrench, but just how much torque does a small screw require?

Scritto da: C. Robinson

Great kit for 3D printers

Most 3D printers come with a small set of hex wrenches but they're tiny and clumsy to use in tight spaces. Most hex screwdriver sets come with sizes too large to be useful for 3D printers. This is a nice blend between the two - very small sides (down to 1.3mm!) but a pleasure to use.

Scritto da: R. Lovrin

Worked well generally, but do not stress the ball ends

These have worked well for my general use, but I have had 2 out of the 6 (33%) drivers round off their heads while working on my 3D printer and 3D Printed plastic parts. Just today, threading an M3 screw into a 3D printed plastic part, my 3mm driver head rounded off, and I had to finish the screw with a ball-hex L-Wrench. I will be replacing my set with a different manufacturer.

Scritto da: Mark Welker

Well built alternative to traditional Allen keys if you’re looking for speed over torque

I’ve been working on a number of projects with some assembly with metric fasteners, and while traditional Allen keys are universal to a degree, never the fastest. I’ve been putting hex driver bits into some of my screwdrivers, and could spin t-handle hex keys, these precision screwdriver style ball-end Allen keys have been a major time saver for me during assembly steps. Lightweight, decent balance, good reach and the ball end fits fairly well to the socket head machine screws I’ve been using, making it a little easier to place the screws. The clear vinyl packaging included with the screwdrivers isn’t much to write about, it works for storing the screwdrivers when not in use, but not the most practical either with some odd folds to keep the tools in place. While I haven’t thrown away the case yet, nor find it work knocking a star off this rating, the screwdrivers have either been loose in my tool at when needed in the field, or looking at adding a screwdriver holder to my workbench or pegboard, and so far the screwdrivers seem to be holding fairly well. If I wear out the tips or handles get loose (which I’ve seen on similar drivers when over torqued) these are affordable enough and work well enough I could see buying these again

Scritto da: Jon M

Just what you have come to expect from Eklind.

Eklind is your classic, made in USA, manufacturer. This is a precision set and it seems to have good and tight tolerances. I am very pleased with the purchase.

Scritto da: S R Smith

May be precision but they are not strong.

Disappointed. Items look and feel very cheap and sorry to say the 1.5mm key rounded off the first time I used it. I was trying to loosen a collar on an RC helicopter and it couldn't take the strain. Not sure how long the others will last but I certainly won't try them on anything tight.