HHIP-3900-2147 Magnetic Vise Jaws (Various Jaw Widths and Face Types),5" Jaw Width 5" Jaw Width Soft Face

Brand:HHIP

3.3/5

€
53.80

5 x 1-1/8" Aluminum Soft Vise Jaws with Magnets ~ Constructed from a hardened aluminum alloy with two built-in circular permanent magnets on the backside which holds the workpiece securely to the vise. ~ Designed to protect both the vise jaws and the workpiece from marring and distortion during any clamping application. ~ Grooves ensure tight holding of different shapes of work pieces. ~ Aluminum alloy design includes straight grooves to compensate for the unevenness of the workpiece. ~ Sold by the pair.

Amount

Add to Cart Buy now

EAN: 0769053021713

Categories Tools & Home Improvement, Industrial & Scientific, Power & Hand Tools, Workholding, Hand Tools, Vises, Bench Vises,

Sold by pair. Grooves ensure tight holding of different shapes of work pieces. Designed to protect both the vise jaws and the workpiece from marring and distortion during any clamping application. Constructed from a hardened aluminum alloy with two built-in circular permanent magnets on the backside which holds the workpiece securely to the vise. 5 x 1-1/8" Aluminum Soft Vise Jaws with Magnets.

Brand	HHIP
Color	White
Country of Origin	China
Item Dimensions LxWxH	10.16 x 3.81 x 3.81 inches
Item model number	3900-2147
Manufacturer	HHIP
Material	Aluminum
Product Dimensions	10.16 x 3.81 x 3.81 inches; 7.2 Ounces
Style	Soft Face

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Ian Mazursky

Great!

These are great. Makes a junk vise with gnarly jaws a lot more useful. I often need to clamp aluminum and other soft metals/plastics. This really helps to keep the damage down. Everyone with a vise should have a set of magnetic soft jaws.

Scritto da: Caribou60

Good, but the magnets ARE weak

I like these jaws, they're well machined, fit together well and protect your work when you need them. The only thing that keeps them from being a 5 star product are the weak magnets. They're just not strong enough and as a result they slip when you need them to stay put. So I took a chisel to the magnets (covered them first with painters tape because they are very brittle and will shatter and fly all over - wear safety glasses) then scraped out the remnants and the adhesive with a pick. These things are better made than you may think. The original magnets appear to have been glued into metal cups (like freeze plugs) which were then pressed into the aluminum. Once I cleaned out the cups I epoxied in some 16x4mm replacement magnets. NOW they're worth 5 stars!

Scritto da: richard modrzewski

Good magnet

Magnets are good. I had a previous set of soft jaws and I like these much better. With that being said. I use my nylon soft jaws the most. I was on the fence with the nylon at first but those puppies get the most use

Scritto da: Juan Gonzalez

Great product

You wont be disappointed

Scritto da: Dennis

Fit and prices

Prices, simple design

Scritto da: Stanley Dickerson

Buyers beware

I had high hopes for this item, MAYBE if you clamped something full width they would work, however if you clamp down on anything that is not the full 8" the rubber bows out, ours fell off at one point. We used JB weld to hold it in place, even then anything less than 8" caused the rubber to bulge out. They "look" good, but are not, at least not for a fully functional shop that holds various sized items in the vice. I would be in good conscious to call these trash, from what we have experienced. The only redeeming quality is that the magnets are strong, and their finish is nice, but the fatal flaw is in the rubber...the most important part.

Scritto da: Louis H.

good

Scritto da: Mohalecki

Soft jaws for vise

Fits the vise well but magnets are a bit on the weak side.

Scritto da: ultra.kick

Seltenes Messing

Nachdem ich mir (zufällig) einen hhip-Schraubstock zugelegt habe , habe ich diese Messingbacken entdeckt . Es deutet leider nichts darauf hin , daß die gelieferten von hhip sind . Ist wohl ein Lager-Überbleibsel . Für knapp 12,- jedenfalls 5 Sterne . Haben gut 400g und große Neodym-Magnete eingebaut . Man kann deshalb an die Profilseite sogar einen Blechwinkel mit aufgeklebtem Filz etc. 'anheften' , also doppelte Schonbacken-Funktionalität . Die Messingbacken machen sich auch sehr gut auf einem Saugnapf-Minischraubstock , der damit sein mickriges Dasein abrupt beenden kann . Ich habe deshalb noch hhip-Alubacken nachbestellt , die mit diesen hochwertigen Messingbacken leider nur den Namen gemein haben . Diese allerdings hpts. zum Zusammenschnippeln , so daß man auch 50mm-Backen in einen 150mm Schraubstock einspannen kann . Kurze Backen sind leider öfter notwendig als lange , zB. beim Abschneiden von Schrauben , wo der Schraubenkopf immer störend ist . Messingbacken sind leider nirgends erhältlich , weshalb ich weiterhin recht zufrieden bin .

Scritto da: DarPow

Just alright

The adhesive that holds magnets and jaw rubber needed immediate repairs

Scritto da: Shoveler

Quality product.

Quality product, works well.