Intermatic PF1202T Control System with Freeze Protection and Power Center with Two T104M Mechanisms, Beige

Brand:Intermatic

3.3/5

€
917.38

PRODUCT DESCRIPTION Protects pool/spa equipment against freeze damage. FROM THE MANUFACTURER These heavy-duty Freeze Protection Controls are designed specifically for pools requiring one or two time switches and protect the pool and spa equipment and plumbing against freeze damage. They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat. In addition, they have a provision to install switches inside or GFCI receptacle on the side of enclosure. For pools with cleaner, requiring two time switches.

Amount

Add to Cart Buy now

EAN: 0078275073593

Categories Patio, Lawn & Garden, Pools, Hot Tubs & Supplies, Parts & Accessories,

They Turn The Pump And Heater On When The Outdoor Temperature Drops Below The Temperature. Protect The Pool And Spa Equipment Against Freeze Damage. Designed For Pools Requiring One Or Two Time Switches. User Adjustable Thermostat.

Brand	Intermatic
Color	Beige
Connector Type	Screw
Contact Material	Silver
Contact Type	Normally Open
Country of Origin	China
Current Rating	17 Amps
Customer Reviews	4.2 4.2 out of 5 stars 55 ratings 4.2 out of 5 stars
International Protection Rating	IP54
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	6 x 12 x 14 inches
Item model number	PF1202T
Item Weight	10 pounds
Manufacturer	Intermatic
Material	Metal
Mounting Type	Wall Mount
Number of Items	1
Number of Positions	1
Operating Voltage	240 Volts
Operation Mode	ON-OFF-ON
Product Dimensions	6 x 12 x 14 inches
Switch Type	DPST
Terminal	Screw Type
Unit Count	1.0 Count
Upper Temperature Rating	130 Degrees Fahrenheit

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Warren Harris

Works Perfectly - Solidly Made and Reliable.

This is exactly what I needed. It's easy to install and works exactly as it should. I've read reviews of the freeze guard where people had trouble with temperature control and the system going on and off. If you actually READ the label attached around the temperature sensor tube (which WILL break if not handled properly) it tells you to route the sensor OUTSIDE the cabinet and protect it with some tubing. This is not a difficult thing to do and make perfect sense. I was planning on doing this even before I read the tag. It seemed logical if you have any idea how these devices function. Mine replaced a pair of old timers in individual boxes, so I had to bend some conduit (it's been a lot of years since I've done this, but no big deal) and extend some wiring. In the overall scheme of things I'd say it was pretty easy and it works great.

Scritto da: Tracy Williams

One of the timers has quit already so looking to buy another one. Ok

Didn’t last a year

Scritto da: lfhsv

Does what it says it should do

I would have given it a 5, but my only gripe is with the temperature sensor probe tube. When this shipped, it was neatly twisted, but obstructing the ground bar. I moved it attempting to make room for me to attach the ground wires to the ground bar, and ended up breaking the copper tube. It was filled with some sort of gas, and immediately rendered itself useless when the gas quickly exited the pressure-filled copper tube. Of course the manual warned to be careful with this probe, but I didn't read that until after it was broken. I got a replacement thermostat, and was more careful the second time around. since then, it has worked flawlessly.

Scritto da: Tom L.

Easy Install and works like a champ!

I had three separate controls for my main pump, booster pump, and freeze control that were pretty dated and the timer mechanism for the main pump went out. I like the fact that this one unit encompasses all three controls in a single box and much of the wiring that I would have had to do for each was already done! The instructions were clear and easy to follow and, having never worked with 220v before, I was a bit apprehensive...but it was super easy and works like a champ!

Scritto da: Robert J. McBroom

The Intermatic PF1202T is a solid buy

This is a well made product, I purchased a new one to replace one of the same model, PF1202T that had been in service for 20 years , the old one had a timer on the right side, the booster pump timer, fail. It was less expensive to replace the whole unit myself than to have an electrician or pool technician come and replace the timer module.

Scritto da: Teresa Sharp

Scritto da: Amazon Customer

After installing item it ran continuously. I contacted manufacturer ...

After installing item it ran continuously. I contacted manufacturer troubleshooting line (815)675-7000 and they walked me through a few test and determined it has a defective thermostat. I can operate using timers after disconnecting thermostat. Awaiting replacement part. Will update later.

Scritto da: Bruce H

Good, but bad quality control

The first two boxes had wiring/relay issues and one had a bad freeze protection circuit. The second one actually had some wires barely touching causing sparks on initial power up. The third one worked like a charm, you just shouldn't have to order 3 before getting one that works. 5 stars for Amazon for their easy return policy! I would not buy this from anyone that doesn't have easy returns.