0
0

Total:€ 0.00

See cartCheckout
LoginRegister
0

Total:€ 0.00

See cartCheckout
LoginRegister

Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard

Brand:Kegco

3.5/5

€
581.14

This Standard Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains everything you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings. Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits (Other sellers are selling inferior kits that are not Warrantied or Quality Assured Kegco Quality.

Amount
Add to CartBuy now

EAN: 0797734447903

Categories Appliances, Refrigerators, Freezers & Ice Makers, Kegerators,

INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear. STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length. SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and four screws for easy mounting. LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use; simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg. PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and CO2 volume and adjust CO2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
Customer Reviews 4.5 4.5 out of 5 stars 100 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer No
Item model number BF STCK-5T
Item Weight 17.41 pounds
Manufacturer Kegco
Product Dimensions 20 x 10 x 12 inches

3.5

13 Review
5 Star
77
4 Star
9
3 Star
5
2 Star
4
1 Star
6

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: engrstudent1984
Exactly what I was looking for!
I ordered this item to convert a used mini fridge into a man cave focal point. It was just what the doctor ordered. Each item came indivually packed in a larger box with no damage noted from the shipping process which was pretty quick. All items are well constructed and I suspect the tower/tap will function for years to come. You cannot go wrong with this item. Some thoughts for those wanting to do a conversion: 1. When considering a one tap tower vs. a two tap tower remember that keg beer is unpasteurized and lasts only 1-1.5 months. The smallest standard keg (1/6 barrel) holds something like 5.3 gallons. So unless you have a lot of beer drinkers all the time a two tap tower might be an unnecessary added cost. 2. I wouldn't recommend buying a new mini-fridge as you run the risk of destroying it if you drill the beer line hole in the wrong location. It took only a few days of looking around online (Craigslist) to find a used one for $60 that would fit the bill (look for one without a freezer). 3. There are PLENTY of videos online which show the conversion process and how NOT to damage your fridge, so once you have this kit it takes no longer than 30 minutes start to finish. 4. CO2 can be obtained from a gas supply store for much cheaper than a beverage supply store. Here in SC I can get a food grade CO2 fill up for $15 at Airgas National Welders. I hope this info helps and you enjoy your kit as much as I do. Happy Drinking!
Scritto da: BrandonM427
Great kit except for the regulator.
I installed this kit in a mini-fridge that I was not using anymore. Very easy to install with the right tools. The only problem I had was with the CO2 regulator. The low-pressure side would slowly rise to 40psi even with the adjustment screw out all of the way. I ordered a TapRite brand regulator and now my kegerator works and pours perfectly. Just make sure your fridge can keep temperatures below or at 40F. Also, the instructions say to run CO2 pressure at 10-12psi, but I find I get better pour at only 3-5psi. At 10psi, my system pours too fast and it is very foamy (half glass of foam at least). At 5psi or lower, it pours a perfect mug of cold beer. I'm new to home draft beer systems, so maybe it's just me. If somebody with more experience has other tips, please let me (us) know. Hopefully my faulty regulator was a fluke. Even though I had to replace the regulator, you get everything you need to convert an old fridge to a kegerator and the chrome tower and faucet look very nice. Overall, I recommend this kit.
Scritto da: B. Dominic
Works Perfectly, though the tower is a bit unstable
This system is impeccable, exactly what the doctor ordered. Installation took about 30-45 minutes after verifying that the fridge contained no lines running through the top. I used a 1.5" hole saw to drill through the top. The rest was a cinch. There was just one thing that needs improvement and that is the stability of the tower. The screws are too short. I would recommend getting longer screws (long enough to go through the top of the fridge) and anchor each with a nut and washer. Drill a pilot hole first though! Pro-tip: Get your CO2 tank filled at a local Fire Protection company (eg. Cintas Fire Protection). They filled mine up for $15. I've gone through 2 kegs now and no sign of slowing on CO2 pressure.
Scritto da: TimPro
Heavy Duty Hardware - Great Quality!
Installation was easy and the quality is amazing. Very heavy top-quality hardware and connections. A few tips: 1. Most CO2 refill companies will require you exchange your tank for theirs - be prepared to give up the nice aluminum tank. Check your local fire extinguisher refill companies in the yellow pages and DO NOT use paintball refill retail outlets (some add lubricating oil to their CO2). 2. If running the tower mounted on a bar outside of the refrigerator, you will need to keep the beer line temperature at a cool 38 degrees. Do this by running the line through 2" PVC and using a 12 CPM pole fan (and 1" tube) inside the fridge to circulate the cool air through the pipe and tower. I used a 2.5" hole saw to accommodate the piping. Failure to do so will result in lukewarm foamy beer. Enjoy!
Scritto da: Matthew Bublitz
Works Great
Recently I got a Kegerator and I refurbished it. I took all of the inner piping out, along with the tank. Using this kit it was very easy to replace everything. All of the parts I needed came included with step by step instructions on what to do. The only issue I had when installing were that the new pillar was not the same size as the one that was already on it. This required me to drill 3 new holes, but once that was done it was easy. The hardest part was finding somewhere that would fill the CO2 tank.
Scritto da: Righteous Pops
Top Quality products and Best prices!
I researched Kegerator kits online for several weeks before deciding to purchase mine from Kegco. Quite frankly they are miles ahead of anyone else when it comes to quality, price and service. Every piece of the kit is top of the line, heavy duty and built to last. Compared to the fully assembled Kegerator I purchased last year the quality and workmanship in each piece far exceeds my expectations. I am in the process of building a 2nd kegerator as a gift and quite frankly I am a bit jealous because the quality of the gauges, tower, lines, and coupler is superior to my existing unit. I would highly recommend purchasing this from Kegco - they offer the best prices, best delivery, and highest quality you will find!
Scritto da: Blake LaFleur
Works great so far
Works great so far. The only complaint I have is that the beer lines are too short. Had to upgrade to 10ft 3/16" ID lines in order to reduce foaming. Only tip i have is to fab up a tower cooler, otherwise your first pours will be 3/4 foam as well.
Scritto da: Amazon Customer
Easy to follow instructions
When I ordered my kegerator I didn’t realize that the tower was not included. I ordered it and it was available in one day. It was extremely easy to install and the instructions were very easy to follow
Scritto da: Vanblitz
Five Stars
Amazing to put together and love it !
Scritto da: Joe Faught
Five Stars
easy to install. works good
Scritto da: matvei
Five Stars
Good product
Scritto da: Vincent Beaudoin
Five Stars
perfect for my project
Scritto da: TG
Perfect for kegorator
Perfect to build a kegorator. Great quality, and wouldn't hesitate to buy again.

Related products

hot
Kegco 3P2PSCK-5T Kegerator Kit, 2-Tap, Stainless Steel
4.1/5

€ 747.25

Kegco 3P2PSCK-5T Kegerator Kit, 2-Tap, Stainless Steel
4.1/5

€ 747.25

hot
Kegco Ice Box Coupler, 4-1/2"
4.1/5

€ 76.58

Kegco Ice Box Coupler, 4-1/2"
4.1/5

€ 76.58

hot
Kegco 3P2SCK-5T Kegerator Kit, 2-Tap, Chrome
3.8/5

€ 665.84

Kegco 3P2SCK-5T Kegerator Kit, 2-Tap, Chrome
3.8/5

€ 665.84

hot
Kegco 3PLPSCK-5T Kegerator Kit, 1-Tap, Chrome
0.1/5

€ 515.68

Kegco 3PLPSCK-5T Kegerator Kit, 1-Tap, Chrome
0.1/5

€ 515.68

hot
Kegco 3PUCK-5T Kegerator Kit, 1-Tap, Chrome
2.9/5

€ 685.49

Kegco 3PUCK-5T Kegerator Kit, 1-Tap, Chrome
2.9/5

€ 685.49

hot
Kegco 3P2X-KM175G-RBT Kegs, 1.75 Gallon, Stainless Steel
0.1/5

€ 616.56

Kegco 3P2X-KM175G-RBT Kegs, 1.75 Gallon, Stainless Steel
0.1/5

€ 616.56

hot
Kegco 3P2SHCKBALLKEG5T Kegerator Kit, 2-Tap, Chrome
4/5

€ 1170.68

Kegco 3P2SHCKBALLKEG5T Kegerator Kit, 2-Tap, Chrome
4/5

€ 1170.68

hot
Kegco 3P2PDDK20 Keg Dispensing, 2-Tap, Chrome
0.1/5

€ 243.44

Kegco 3P2PDDK20 Keg Dispensing, 2-Tap, Chrome
0.1/5

€ 243.44

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array

Total:€ 0.00

See cartCheckout

Categories

All the categories
Menu Categories Near Cart

Menu