Klein Tools D213-9NETH Lineman's Bolt-Thread Holding Pliers, High-Leverage Streamline Design with Rounded Nose and Knurled Jaw, 9-Inch With Thread Cleaner

Brand:Klein Tools

3.9/5

€
78.47

PRODUCT DESCRIPTION The hinge opening on Klein's Lineman's Bolt-Thread Holding Pliers holds and cleans 5/8'' (16 mm) pole line and hardware bolts or threaded rods. The plier head is precision-hardened for on-the-job toughness. The exclusive handle tempering helps absorb the ''snap'' when cutting wire helping reduce fatigue. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857. FROM THE MANUFACTURER Klein D213-9NETH 9-Inch High-Leverage Side-Cutting Pliers-Lineman's Bolt-Thread Holding. The Klein D213-9NETH 9-Inch High-Leverage Side-Cutting Pliers-Lineman's Bolt-Thread Holding has a hinge opening that holds and cleans 5/8-Inch pole line and hardware bolts or threaded rods. The Klein D213-9NETH 9-Inch High-Leverage Side-Cutting Pliers-Lineman's Bolt-Thread Holding features the high-leverage design where the rivet is closer to the cutting edge for 46-Percent greater cutting and gripping power than other pliers designs. The Klein D213-9NETH 9-Inch High-Leverage Side-Cutting Pliers-Lineman's Bolt-Thread Holding has the streamlined design with rounded nose and sure-gripping, cross-hatched knurled jaws. The Klein D213-9NETH 9-Inch High-Leverage Side-Cutting Pliers-Lineman's Bolt-Thread Holding has custom US-made tool steel. The Klein D213-9NETH 9-Inch High-Leverage Side-Cutting Pliers-Lineman's Bolt-Thread Holding has precision-hardened pliers head for on-the-job toughness, sure-gripping cross-hatched knurled jaws, and plastic-dipped handles for comfort and ease of identification. The Klein D213-9NETH 9-Inch High-Leverage Side-Cutting Pliers-Lineman's Bolt-Thread Holding has a hot-riveted joint ensures smooth action and no handle wobble.

No units available

EAN: 0092644700507

Categories Tools & Home Improvement, Power & Hand Tools, Hand Tools, Pliers, Side-Cutting Pliers,

Plastic-dipped handles for comfort and ease of identification. Streamlined design with rounded nose and sure-gripping, cross-hatched knurled jaw. Made in USA with Custom, US-made tool steel. Hot-riveted joint ensures smooth action and no handle wobble. Induction hardened cutting knives for long life. High-leverage design has 46-percent more cutting power. Pliers hold and clean 5/8-Inch pole line hardware.

Batteries Required?	‎No
Brand	Klein Tools
Brand	‎Klein Tools
Color	Dark Blue
Color	‎Dark Blue
Country of Origin	‎USA
Customer Reviews	4.8 4.8 out of 5 stars 3,947 ratings 4.8 out of 5 stars
Grip Type	Power
Grip Type	‎Power
Handle Material	Alloy Steel
Handle Material	‎Alloy Steel
Included Components	‎Tools & Accessories
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1 x 1 x 1 inches
Item Dimensions LxWxH	‎1 x 1 x 1 inches
Item model number	‎D213-9NETH
Item Package Quantity	‎1
Item Weight	1.1 Pounds
Item Weight	‎1.1 Pounds
Manufacturer	‎Klein Tools
Material	Alloy Steel
Material	‎Alloy Steel
Part Number	‎D213-9NETH
Pattern	‎Pliers
Power Source	‎Hand Powered
Product Dimensions	‎1 x 1 x 1 inches
Size	‎9-Inch
Style	‎With Thread Cleaner
Usage	Hold,Holding,Cutting,Gripping
Usage	‎Hold,Holding,Cutting,Gripping
Warranty Description	‎1 year manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Juan Rodriguez

Llegó el producto muy bien.

Las he usado ya ase 4 años y esta es para mi hermano que le gusto la que yo tengo. Es un buen regalo de mi parte, las mejores pinzas ????????

Scritto da: Drew and Ryan

Good quality

Good quality and fit in my hands I have big hands

Scritto da: ntsworld

The best way to instantly fix stiff pliers:

When you open the package, you can see the reason the pliers are stiff--notice the black carbon dust that is on the tool. That is because the iron particles become charged during the grinding process and attaches itself to the pliers from static. This grinding dust is also inside the rivet between the halves of the pliers. Firstly, you want to wipe it all off or blow it with air. Then, get some Break Free CLP and apply a liberal amount (dripping is ok) to the following points: both sides of the rivet head, top hinge below the cutters, bottom hinge opposite of that, and to the left and right sides. When it is thoroughly saturated, work the handles open and closed for a good minute in all angles to let gravity bring the CLP oil into the inner workings of the hinge. Then without wiping it, let it sit for a few hours. When you get back to it, work it a few more times and wipe dry. You should have a fully broken in plier where the handles fall free on its own. As far as the pliers go, it's the best plier I own and I like it even more than my Knipex. It is not too big or heavy and I'm a 5'6" 125 lbs size small gloved stick-nerd. An 8" might be more comfortable but then you lose the leverage and length to use as a hammer. Concerning that, it's pretty much only meant for hammering small nails such as NM/Romex staples which it does beautifully and as well as an actual hammer. It has two milled flats on the plier jaws for this specific purpose. The gap on the head is spaced perfectly with cross-hatched teeth on the jaws for grabbing parallel and perpendicularly. The gap on linemans pliers have several purposes--it is so that the cutters still cut flush as it is worn down and sharpened multiple times. Additionally, it is to allow the ability to twist soft copper wires together without too much damage to the wires. Lastly, many electricians use the linemans to strip wire as well, scoring the insulation with soft pressure on the cutters and then pulling the jacket with the plier head. All in all, Kleins are a must have and it's the essence of high quality at an affordable price.

Scritto da: Ivy

sharp

sharpess pliers i ever owned.

Scritto da: roberto tinoco

excelente

para trabajar es lo maximo

Scritto da: Ted W Rowland

Simply the Best

Klein linesman's pliers are the best I've ever used. I like that they are a simple one-handed operation, that you can let go of one handle and they slip open without being loosey-goosey. This is my second pair actually and the others were still in good shape but I wanted to pair that had the crimper built in. After using the other pair for 25 years I gave them to my neighbor and there is absolutely nothing wrong with them

Scritto da: Starko

Best linesman's pliers out there

I use them on a daily basis, and they work great every time

Scritto da: Rebeca Bronkerch

EXCELLENTE

PRODUCTO QUE COMPRE EXCELENTE, RAPIDEZ EN LA ENTREGA, GARANTIA DE DURABILIDAD.

Scritto da: robothand

Top class pliers

Heavy duty and does the business. Cutters are sharp , and has serious grip. Should last a lifetime.

Scritto da: Ja

Great tool

Good strong grip. Cutter good too as although usually use bolt cutters. Up to the job , Agri fencing

Scritto da: Mr. Mike A. Ellerslie

Best pliers on the market

Best pliers on the market ,I'm 48 year old spark and been using Klein pliers for the past 25 years this is my third pair . I used other makes. Before but they only last a year or two ,now 12 years plus with Klein a pair . Well worth the extra money

Scritto da: Amazon Customer

Five Stars

Excellent

Scritto da: Jesús. O. García Flores

De las mejores

Esta herramienta es una excelente inversión. Compré estas pinzas hace aproximadamente dos años y las he estado usando en la casa y en el trabajo (electricidad). Cortan el cable 8 relativamente fácil y son más ligeras que mis Tulmex de mango azul con negro, así que cansan menos. No he cortado calibres de mayor diámetro porque para eso tengo otras pinzas corta cable. Definitivamente no son para cortar tornillos (por ejemplo, las pijas negras para madera o tablaroca) ya que deforman la cuchilla. Sí he cortado tornillos "blandos" como los que vienen en los accesorios de los apagadores, pero su propósito no es ese. Tienen buen agarre y el tamaño para mí es adecuado (supongo que depende de cada persona eso). Tampoco están diseñadas para golpear los desarmadores como si fueran cincel, pero yo lo he hecho en algunas ocasiones y no se han apretado. Han subido bastante de precio (lo doble), pero si las usarás a diario en tu trabajo, lo vale.