Moen YG2218BN Brantford Safety 18-Inch Stainless Steel Traditional Bathroom Grab Bar, Brushed Nickel 18 Inch Brushed Nickel

Brand:Moen

3.8/5

159.80

Changing the look of your bathroom has never been faster and easier. The M-PACT Common Valve System allows you to upgrade the trim style or swap out finishes on your fixtures without replacing the valves. So once the system is in place, you can change your decor as often as you want at any point in time -- during construction process or years down the road. All it takes is a few minutes. Best of all, the M-PACT Common Valve System is as easy to install as a standard valve.

18-Inch Bar; 1.25-Inch Diameter. BUILT TO LAST: Backed by Moen’s Limited Lifetime Warranty. COORDINATING COLLECTION: Coordinates with other faucets and accessories in the Brantford Collection. PEACE-OF-MIND: Designed for hassle-free installation. SAFE AND SECURE: Optional SecureMount design for easy, secure installation (sold separately). SUPPORTIVE DESIGN: Bathroom grab bar supports up to 500 lbs when installed in a stud or when using SecureMounts (not included). WARM AND INVITING: Brushed Nickel finish provides a lightly brushed warm-grey metallic look.
Assembled Diameter ‎1.25 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand Moen
Brand ‎Moen
Color Brushed Nickel
Color ‎Brushed Nickel
Country of Origin ‎Taiwan
Customer Reviews 4.7 4.7 out of 5 stars 234 ratings 4.7 out of 5 stars
Cutting Diameter ‎1.25 Inches
Domestic Shipping Item can be shipped within U.S.
Finish ‎Brushed
Finish Type ‎Brushed
Included Components ‎Mounting Hardware, Installation Instructions, Grab Bar
Installation Method ‎Wall Mounted
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3.25 x 22.58 x 2.8 inches
Item Dimensions LxWxH ‎3.25 x 22.58 x 2.8 inches
Item model number ‎YG2218BN
Item Package Quantity ‎1
Item Weight ‎2.14 pounds
Manufacturer ‎Moen Incorporated
Material Metal
Material ‎Metal
Part Number ‎YG2218BN
Product Dimensions ‎3.25 x 22.58 x 2.8 inches
Size ‎18 Inch
Style Traditional
Style ‎Traditional
Warranty Description ‎Limited Lifetime Warranty

3.8

10 Review
5 Star
85
4 Star
8
3 Star
4
2 Star
2
1 Star
1

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Gadfly-in-Residence
Good, sturdy, nice finish
Nothing negative to say about this. If you need a reliable grab bar in your bathroom, and you don't want it to look like your average ad hoc, drug store mobility aid, Moen definitely proves that ADA compliance can also be stylish. The bar has a good heft, is easy to install, and looks attractive. Moen doesn't make a grab bar in every style, but, fortunately, the Brantford design looks of apiece with other Moen designs such as Banbury, Dartmoor, and Weymouth. Only a really persnickety eye would bother carping about their differences. As with all ADA compliant grab bars, you have to install this into the studs for it to be safe. Fortunately, as long as one of the three screws behind each escutcheon is anchored to the stud, the installation is considered "secure." (Obviously, more than one is always better.) Overall, I'm very pleased with this purchase. No buyer's remorse here.
Scritto da: Sursur C.
Attractive and sturdy hand rail.
Sturdy and good looking. Excellent function.
Scritto da: Ken H.
Looks great
Like looks
Scritto da: Valentina Garza
The Screws heads are TOO SOFT
The product looks well made and all, in fact from a design standpoint it is better than a grab bar I previously installed where I could barely get to the screws themselves. However, not sure if instructions on pilot hole are whack or my studs are just very tough to get through, but with screws provided had very tough time installing properly. Had to pull them back out and try to drill pilot hole deeper and/or slightly bigger. In this process I stripped all the screws some to the point that I could no longer remove them without special tools to extract. Self-drilling screws and/or a hex-head screw would have been much better for this project. Also, step six is take out the pilot screws to remove the bar. At step 6 everything is installed and pilot screws can be difficult to get to. Additionally with the tool provided to remove set screws, torque required to turn some of them and get them off far-exceeded my ability with the space provided so close to wall. Would have been better if this step was given after you pick your spot and mark your placement of pilot holes and done before installing the bar on the wall. Felt like what should have been a 30 minute job turned into multiple hours just because of the provided install screws and set screws and the instructions which could have been better.
Scritto da: Jack Lyons
Quality, quality, quality
Extremely nice-looking high-quality safety bars for the shower or bath that look more like high end towel bars. Very impressive.
Scritto da: Richard W.
Bought several
Very fucvtional
Scritto da: SM
a grab bar that doesn't look like one.
I have 3 of these used vertically for entrance to porch, front door and balcony. Bought them to match existing hardware so it really looks integrated. Although I purchased them for my husband, I find myself and guests often use them. I recommend them highly!
Scritto da: Tony Eubanks
Attractive and sturdy Shower Grab Bar
We needed a shower grab bar for the bathroom and Moen provided the type that we were looking for. Installation of the shower grab bar doesn't require a lot of extra tools or an engineering degree to install. Impressed with the sturdiness of the product and how nice it matches the fixtures in the bathroom.
Scritto da: joe
please read please read
this product has already been returned..
Scritto da: Jorge Esqueda Querol
Fácil de Instalar
Fácil de instalar

Related products

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array