NEIKO 10224A 1/4" Extra Long Security Bit Set, 32 Piece Screwdriver Bit Set For Drill, S2 Steel 6” Long Torx Bit Set, Tamper Proof Bit Set, Torx, PoziDriv, Spanner, Tri-Wing, Security Power Bit X-LONG SECURITY BIT SET

Brand:Neiko

3.6/5

€
67.97

The NEIKO 10224A Extra-Long Security Bit Set lets you easily repair and work on valuable parts and items. The bits are made from durable S2 steel and are heat-treated for superior performance and longevity. They have an extra-long length of 6", making them ideal for working on electronic appliances or securing hard-to-reach security screws. These bits insert smoothly into fasteners and protect both the bit and the fasteners from damaged edges. Each bit features a universal hex shaft and a unique bit end and is precisely machined for exactness. This 32-piece hex-bit set includes the following sizes: 6-millimeter slotted; #1 and #2 Phillips; PZ1, PZ2, and PZ3 Pozidriv; 6-millimeter, 8-millimeter, and 10-millimeter Torq-Set; #1, #2, #3 and #4 Tri-Wing; 4-millimeter, 6-millimeter, 8-millimeter, and 10-millimeter spanner; 2-millimeter, 2.5-millimeter, 3-millimeter, 4-millimeter, 5-millimeter, and 6-millimeter tamperproof hex; and TT8, TT10, TT15, TT20, TT25, TT27, TT30, TT35, and TT40 tamperproof Torx. This security set also includes a hard plastic storage case for optimal organization. Our tamperproof bit set is perfect for jobs at home or work. The long size of the bits allows you to reach tough spots, and the low-profile case lets you take the bits wherever you go. NEIKO has your back with our durable, dependable, and strong tools.

Amount

Add to Cart Buy now

EAN: 0837013102243

Categories Tools & Home Improvement, Power & Hand Tools, Power Tool Parts & Accessories, Screwdriver Bit Sets,

HEAVY-DUTY SECURITY BITS: Our security bit set can be used for any project, large or small. Use the bits to secure corresponding screws into wood, metal, or any material when extra security is needed. Get work done with confidence and speed!. 1/4-INCH HEX SHANK: Each security power bit in this hex drill-bit set measures 6" long and has a universal 1/4-inch hex shank. These bits are ideal for working with electronic appliances. Use this set wherever extra security is a must. PRECISION MACHINED BITS: Each piece in this screw bit set is an extra-long bit set is finely crafted and precisely machined for accurate size. The chamfered bit ends insert smoothly into fasteners and protect both the bits and the fasteners from damaged edges. VERSATILE TAMPERPROOF BIT SET: This versatile bit-driver set includes 8 unique bit ends, including slotted, Phillips, Pozidriv, Torq-Set, Tri-Wing, spanner, tamperproof hex, and tamperproof Torx. HIGH-QUALITY HEX-BIT SET: Each screwdriver bit set piece in this set is made from durable S2 alloy steel, which reduces wear and tear and ensures longevity. This bit kit contains uncommon bits that will loosen tamperproof bits that regular screwdrivers can’t unscrew.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Neiko
Brand	‎Neiko
Compatible Fastener Range	‎0.25 inches
Country of Origin	‎Taiwan
Customer Reviews	4.6 4.6 out of 5 stars 6,851 ratings 4.6 out of 5 stars
Drive System	Star
Drive System	‎Star
Finish	‎Black Phosphate, Black oxide finish, Chrome, Painted, Steel
Finish Type	Black Phosphate, Black oxide finish, Chrome, Painted, Steel
Finish Type	‎Black Phosphate, Black oxide finish, Chrome, Painted, Steel
Included Components	‎Extra Long Security Power Bit Set
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6.5 x 3.1 x 2.1 inches
Item Dimensions LxWxH	‎6.5 x 3.1 x 2.1 inches
Item Length	‎6.5 inches
Item model number	‎10224A
Item Package Quantity	‎1
Item Weight	‎2.6 pounds
Manufacturer	‎Ridgerock Tools Inc.
Material	S2 Steel
Material	‎S2 Steel
Number Of Pieces	‎32
Part Number	‎10224A
Power Source	‎Hand Powered
Product Dimensions	‎6.5 x 3.1 x 2.1 inches
Style	‎X-LONG SECURITY BIT SET

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: ACH1940

A Great choice for my gutter re-installation

I needed a long drill to e-install my gutters after the installation of my new roof. These long bits enabled me to drill a clean hole from the outer edge of the gutter all the way to the back-side of the guttr for a secure installation of my gutter screws. Until I received the extra-long bits, I neeeded toreach in to ther back side of the gutter with a shorter drill bit causing some alignment issues - - - now, my gutter screws make a clean entry from front lip to back side for a secure installation Certainly these bit are a cost effective investment for this project.

Scritto da: Chief

3-16-2023 REVIEW

I will be writing an update review in the future to test its true Durability. Shipping was quick. Tools came in a brown box with a plastic base holding all the individual bits. I used the flat head to release the carburetor jet from my lawnmower. I was really glad that the shaft was thin enough to reach the jet because it’s in a tight spot. It would’ve been great if they came up with a better holder for all those bits. Something that would protect them against a fall from say the top of a truck.

Scritto da: William S.

Wow this was the answer to my project..

These drill bits are very good quality and a great value solved the problem and helped me complete my job.

Scritto da: Russell J. Johnson

These are very brittle.

In my first use of a flat head bit it snapped right at the business end.

Scritto da: R

Hex shank was too thick for my applications

The bits overall were good, but I returned them because I needed to get into a race/channel much thinner than these hex-tool steel bits would allow. All 32 bits arrived and well machined/cast. The hard plastic storage case was nice, but it was tight to remove say a middle bit. I used needle-nose pliers to remove them. Getting them back into the case was no problem.

Scritto da: Moody

I STILL CAN'T BELIEVE IT!

I just finished a project where I had to drill 64 full depth holes-5 2x8s and 2 LVLs and ONLY NEEDED 1 BIT! When I knew I would be drilling this many holes, i figured that I better get a second set, drill bits are usually crap, but the 1/8th bit lasted the hole project. I even hit a few nails with no problem. I even needed to bend the bit a little to get past an obstruction and even that did not break the bit. AND the last hole drilled as quickly as the 1st. Even though I got impatient, and ran the drill at high speed for the second half of the project it did not break the bit. The bit didn't even smoke! It takes a lot to impress me, but these drills sure did it.

Scritto da: baker1dad

Good Product

Good product works as advertised.

Scritto da: Andrew Montgomery

YOU GET WHAT YOU PAY FOR (PART XVII∞)...

When it first arrives, you feel pretty chuffed about your purchase: it's a nice looking kit. But you quickly learn your error in judgement, and fall back on that YGWYPF adage. These things are brittle as ceramic, and at the same time, somehow as soft as if they were made of aluminium. Within a day, three tips shattered, and two rounded off to the point of uselessness with one use, driving a self-tapping screw through a doug fir 2x4. These aren't the droids you're looking for. Yes, you'll spend 3x as much getting a better set, but you'll likely only need to buy them *once*. These are suitable for simple homeowner repairs... ...for a very short time.

Scritto da: Amazon Customer

Work Well!

As a custom guitar builder, traditional installer drill bits, while long, have a short flute. This creates a problem - when drilling deep holes through hard wood, short flutes do not allow the cut wood material to cork screw it's way out. Thus friction builds up (and heat) at the head of the bit. In turn, the drill becomes less efficient and the hole takes longer to drill. Sometimes when pulling out the drill bit, smoke will come out of the hole as the wood is starting to burn. These bits, on the other hand, have long flutes allowing one to drill well into the wood quickly, minimizing heat and friction. I just started using them so not sure on the durability of them.

Scritto da: Carbor Undium

Excelentes y extra largas. Durabilidad muy buena y calidad excepcional.

The media could not be loaded. Esta puntas son Extra largas y muy buena calidad. El precio es elevado, pero son de esas herramientas que te salvaran el dia porque siempre hay tornillos que estan en orificio difíciles de alcanzar. Pues ya nunca mas...Con estas puntas no hay limite. La dureza es muy buena, no se desgastan rapidamente.

Scritto da: Ish Rashad

Compact packaging, strong, excellent variety of bits

I have a terrific small KMart heater where the fan blade had detached after I moved it. And the case was protected by tri-wing security screws, deeply recessed. I have tri-wing bits but none would fit the narrow recess holes and reach the screws. Did some research and settled on this set - and I'm glad I did. Had the heater fixed in a few minutes. This bit set is a keeper. I'm happy that they do not include a handle, as it is a standard shanked set. Rather that they save that cost. I have handles that fit - you may need to pick one up if you don't. PLEASE NOTE!: This is not to encourage people to fix mains appliances - I have the training/experience/expertise. I'm just saying that this is an excellent buy at a great price, compared to the field.

Scritto da: Teri

Amazing value!

My husband is a contractor and makes a lot of things in his shop for fun on the side. We were a little sceptical initially because of the price (in stores they would be much more costly) but thought we would give them a try. He said they were awesome to use, fit his drill easily and did everything he needed them to do.

Scritto da: LeviReviewsIt

Many different tips, but rusting too soon

Originally bought o disassemble an appliance closed with security screws. I have only ever used them 2-3 times, so I am disappointed that they are already covered in a fine rust even though they are stored in a dry basement in their original box. Works just find when needed, the problem is in appearance only. Would probably buy the same again even with the rusting. What I like - Very heavy, obviously made of a strong metal - Many obscure tips - Shafts are quite long - Firmly held in place by plastic holder What I dislike - Rusting prematurely