Pony 13025 3-Inch Light Duty Clamp On Vise

Brand:Pony Jorgensen

3.5/5

€
81.57

PRODUCT DESCRIPTION Pony 13025 3-Inch Light Duty Clamp On Vise is designed for light duty home, shop and professional use. It is fully portable, yet mounts easily and securely on edges up to 2-inches thick. Features: 3-inch jaw width, 2-1/2 inch opening capacity, plated steel screw and handle, steel double guide bars allow smooth operation, orange baked enamel finish prevents rusting, cast pipe jaws holds round pipe. The Chicago based Pony Tools Inc. (formerly doing business as Adjustable Clamp Company) which was established in 1903 is the manufacturer of all Pony Vises. Our Pony Vises are made in China. AMAZON.COM Every workshop needs at least one vise, and Pony's incredible clamp-on vise is perfect. It's completely portable and clamps onto any table up to 2 inches thick. The sliding handle turns like a charm, and you're set. For such an incredibly inexpensive vise, the jaws are really wide, and they even have a serrated surface, with an open capacity of a full 2-1/2 inches. We can think of a thousand uses for such a handy device. It's like an extra hand whenever and wherever you need it. Pony's earned its reputation as a maker of fine clamps, so you know anything in the distinctive bright orange color will do right by you. This is no exception.--Kris Jensen-Van Heste FROM THE MANUFACTURER Professionals and do-it-yourselfers alike will appreciate the steadfast clamping power, precision, and smooth operation of the Pony Light-Duty Clamp-on Vise. Serrated jaws grip tight, while steel-plated dual guide bars ensure straight and flush clamping, every time. A sliding pin-handle lets you twist quickly when centered, or slides to let you use the whole pin length for cranking leverage when you need to really bear down on the material. A lower clamp secures the whole vise to worktables up to two inches thick. Grey iron castings with orange baked-enamel finish mean longer tool life. Stronger than comparable vises, this Pony Vise is economical, too. FEATURES * 2-1/2-inch jaw opening capacity for holding a variety of materials * Three-inch, serrated jaws for steadfast clamping * Table clamp mounts solidly on worktables up to 2 inches thick * Double guide bars for positive clamping * Made with plated steel for longer tool life SPECIFICATIONS * Opening Capacity 2-1/2" * Jaw Width 3" * Table thickness up to 2" See more

Amount

Add to Cart Buy now

EAN: 0044295130257

Categories Tools & Home Improvement, Power & Hand Tools, Hand Tools, Workholding, Vises, Bench Vises,

Steel double guide bars allow smooth operation. Plated steel screw and handle. Mounts easily and securely on edges up to 2-inches thick. 2-1/2 inch opening capacity. 3-inch jaw width. The product is manufactured in China. Used for Handtools & Tool Organizers, Clamps. This item is Pony 13025 3-Inch Light Duty Clamp On Vise.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Orange
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 166 ratings 4.5 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Product Information Guide
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎3-Inch Light Duty Clamp On Vise
Item Package Quantity	‎1
Item Weight	‎4.17 pounds
Manufacturer	‎Adjustable Clamp
Material	‎Steel
Measurement System	‎Inch
Part Number	‎13025
Product Dimensions	‎6.75 x 3.25 x 5.25 inches
Size	‎1 Pack
Style	‎Modern
Warranty Description	‎1-Year Limited Manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Zach B.

Excellent for the Money and Intended Use

It's light duty and you should plan to use it as such. My current house is too small to have a dedicated workshop area, despite all the work I do on guns and other things. I got this so I could clamp it to the kitchen counter for an AR build. It's not as good as if I had a dedicated space for a medium duty vise, but it worked as well as could be expected. My two complaints are the depth of the vise and the clamp face surface material. When the vise is open you don't have enough depth to it for some needs.The top guide bar gets in the way. As other reviewers have said the clamp face is smooth paint. This allows slippage without a lot of clamp force but I don't see this as a big drawback as they make this stuff called... sandpaper. Skateboard tape would be another good way around this. Great vise that seems well put together. Just remember that it's quite small and for light use.

Scritto da: Triple Bogie

Very Solid built Vise for $20 Shipped - Great for Golf Grip Installation!!!!

I was looking for an inexpensive vise to use to install my new golf grips. I searched many others on ebay and Amazon and finally settled on this one due to the low price and free shipping. Today I installed my golf grips on my irons and this vise worked perfectly. You have to also buy the rubber shaft holder that surrounds the shaft when clamping down. I mounted this vise to my kitchen table and used 2 pieces of cut bicycle tube to protect the top and the bottom when gripping this vise to my table. The rubber also acted as a grip and held well. I could see way more uses from this vise but my main focus on buying this was for re-gripping my golf clubs. It makes aligning and installing the new golf grips onto the shaft really fast. I would rate this 10 STARS for the low price and good quality, but the MAX is 5 STARS.

Scritto da: Michael LaBossiere

A nice, small vise.

On the plus side, the vise is made entirely of metal (no cheap plastic parts) and can be secured via its clamp to a table, sawhorse or other surface. The jaws are smooth and while other reviewers have complained about a weak grip, I found mine to hold metal rods, wood and other items quite well. On the minus side, the pin used in one of the rods grinds against the body of the vise when opening the jaws. It is not hard to open the jaws, it is just a bit annoying. The jaws close smoothly. As the description says, this is a light-duty vise and is suitable for light work. It is really not designed for fine work-you would obviously want a specialized vise for things like tying flies or doing fine jewelry work.

Scritto da: Dan and Roe Sang

Clamp on vise

Like I can mount it any where. Have a rubber made cabinet outside and used it many times when I have cut or loosen any thing. Also like that it easy to come off and can store it and dose not take up too much room.

Scritto da: racer1

Ok for the price

I haven't used this vice yet and is smaller then I thought but clamps to surfaces I tried just fine. Be aware though this vice does not have jagged jaws to hold maybe slippery items as well but clamps tight enough so should be fine. Vice should work for what I bought it for, sharpening saw blades and or holding material for gluing, drilling or cutting etc although jaws only open to a little over 2" so it wont hold like larger PVC pipe or materials larger then that.. The fact that its portable is nice also so can be used anywhere there is something like a bench or table to clamp to.

Scritto da: Ron DiGiovanni

Deceptive Appearance

Somehow, this vise seems larger in the photo. The product description does not give any indication of the most important feature, namely, the jaws width. They're 3 inches wide, and so now you know how small the product really is. Also, in the photo the jaws have the appearance of having teeth, by the fact that they are not painted. However, in reality the jaws are perfectly smooth on the inside, and are painted orange like the the rest of the item. Fortunately, it works well for the specific purpose I had for it. The clamp is OK for this size of vise and the jaws have sufficient strength. But just keep in mind, this is most definitely a hobby clamp which is just perfect for your Dremmel tool, but most certainly not compatible with your angle grinder. Ron DiGiovanni Easton, PA

Scritto da: Mark Masaki

Solid painted metal; does what it is intended to do, but smaller than the picture suggests.

It is smaller than I expected, but also heavier and more solid. There isn't much space to work with for the bottom clamp, but it's designed to be attached to a table or desk anyway, so I give it 5 stars for what it can do for the money. There is no swivel of course, but no wiggle or slippage once it is clamped tight. There is no rubber stoppers on the vice, think "solid painted metal." You could probably kill someone with this if thrown, so watch out for your toes if you drop it. Mine had it's handle sticking out of the factory and shipping packages.

Scritto da: Duke VonMeep

Definition of meh

Meh. It works and is portable but don't think you are getting the same performance as a bolted down heavier duty vise. Many would consider this a light duty vise and I agree. So for what it is it is technically great and bump up the rating to 4/5, HOWEVER, advice is to only buy if for some reason you just are not able to get a bolted down vise (you live in an apartment and can't fit a work table/bench, you need to have it with you like in a truck or something) just get a bolted down vise as those are more capable and you probably will end up getting one eventually anyway and probably have access to a work bench.