Quicksilver Nemesis 4-Blade Aluminum Propeller - For Mercury and MerCruiser Engines 90 CT - 300 HP Mercury/MerCruiser 14" Dia. X 19" Pitch - 8m0055535

Brand:‎Quicksilver

3.7/5

284.76

Manufacturer part number 8M0055535. Compatible with Quicksilver Flo-Torq Hub Kits. Refer to the hub selection chart for specific details. Aggressive 4-blade design features high rake angles and added cup for tenacious holding. State-of-the-art aluminum boat engine propeller design provides 3-blade speed with 4-blade holding and acceleration performance. Aluminum with black finish. For use with 90-115hp Command Thrust and 150-300hp Mercury/MerCruiser engines. 14" diameter, 19" pitch, right-hand rotation.

Manufacturer part number 8M0055535. Compatible with Quicksilver Flo-Torq Hub Kits. Refer to the hub selection chart for specific details. Aggressive 4-blade design features high rake angles and added cup for tenacious holding. State-of-the-art aluminum boat engine propeller design provides 3-blade speed with 4-blade holding and acceleration performance. Aluminum with black finish. For use with 90-115hp Command Thrust and 150-300hp Mercury/MerCruiser engines. 14" diameter, 19" pitch, right-hand rotation.
Brand Name ‎Quicksilver
Color ‎Unspecified
Customer Reviews 4.7 4.7 out of 5 stars 890 ratings 4.7 out of 5 stars
Fishing Technique ‎Spinning, Casting
Included Components ‎End Product & Information
Item Dimensions LxWxH ‎16.75 x 7.75 x 16.75 inches
Item Package Dimensions L x W x H ‎16.5 x 16.5 x 7.7 inches
Item Weight ‎142 Grams
Manufacturer ‎Quicksilver
Material ‎Various Materials
Model Name ‎8M0055535 Nemesis 4-Blade Aluminum Propeller - 14" diameter x 19" pitch, Right Hand Rotation, 90 CT - 300 HP Mercury/MerCruiser, Black Finish
Number of Items ‎1
Package Weight ‎3.77 Kilograms
Part Number ‎8M0055535
size 90 CT - 300 HP Mercury/MerCruiser
Size ‎90 CT - 300 HP Mercury/MerCruiser
Style ‎14" Dia. X 19" Pitch - 8m0055535
Suggested Users ‎Boat Engine Parts and Accessories

3.7

13 Review
5 Star
81
4 Star
12
3 Star
3
2 Star
1
1 Star
3

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Andante
Good value for the price
This prop fit my 1999 Alpha One, Gen One, 5.7 liter Mercruiser out drive perfectly. (21’ SeaRay BR Select Boat). I replaced a 3 blade 19” prop with the 4 blade 19” and it operated as advertised. Much faster to get on plane with less bow rise…Better handling in rough water…Stays on plane at somewhat lower speed. I did not experience significant loss, if any, of top end speed and stayed within WOT RPM range. I’ve not tried the prop yanking skiers yet but with the way it has operated so far I believe it will get multiple skiers on slaloms up much easier. I really like this prop for the money.
Scritto da: Kindle Customer
What a great Prop!!!
Boat rips on plane and nets 6mph higher top end and 400rpm less.
Scritto da: walt
Effective
Works well
Scritto da: R.G.
Enjoying it.
This replaced my mercury 4 blade prop. I actually gained 3mph..... not sure why but it did. Hole shot has improved too, I plane out pretty quickly. I would definitely recommend this prop.
Scritto da: King Fisher
Nemesis 4 blade 14” x 19” pitch
Make sure you get the hub kit for this prop sold separately! I own a 2001 Bayliner Capri 2150, a 3,000 lb 21 foot boat bow rider with a 5.0 L MerCruiser Alpha One stern drive with a 1.62 gear ratio lower unit. We like to take the kids tubing, so acceleration is important to me. I was currently running a quicksilver black diamond aluminum 15.5 inch three blade prop with a 19 inch pitch. We would typically load the boat with a 35 gallon tank of gas, 3 adults with 3 kids, food, cooler, and gear coming in with the gross weight of appoximately 4,361 lbs. When I was pulling a 3 person tube the bow would come up real high and take a minute to get on the plane. The boat would want to plane at about 23 miles an hour but my tube riders liked it closer to 20 miles an hour so i had to keep adjusting throttle to balance speed. My top speed was around 46 miles an hour. I switched to the nemesis 14“ x 19“ pitch 4 blade prop. Took it out today, and I was immediately satisfied with how it shot out of the hole! The acceleration felt good. It quickly climbed to top speed of 42 mph at 4.200 rpm when trimmed perfect. I backed it down and could maintain plane as low 16 mph! The bite the prop has gives me way more control and traction though the entire throttle only giving up 4 mph of top speed compared to the 3 blade prop. The recommended wide open throttle of my engine is 4,500 to 5,000 rpm max. So I feel like if I had a lighter load I may get that range, but today I was running a 4,000 lb gross weight with people and gear included. My max rpm was 4,200 rpm at 42 mph. Overall I’m super happy with the performance of this prop, definitely worth the upgrade! I hope this review helps.
Scritto da: William V.
Awesome upgrade!
I upgraded from the stock 3-blade prop that came with the boat to gain a better holeshot and get on plane faster. This prop did both extremely well. As far as performance goes, the holeshot was amazing, it had much more dig and I was on plane 10 seconds faster than the old prop. I didn't sacrifice much in the way of top end, maybe 3-5 MPH, but I very rarely run wide open, so this was pretty much insignificant. The one word of caution I will offer is that this prop revs higher than the stock prop did. My Mercury Pro SX 115 is rated to 6300 rpms and when I trim to find the sweet spot, I could conceivably push past that. The one drawback for this prop on my setup is that the sweet spot for trim is very narrow and when you wander outside it, it's begins to porpoise. When it happens, I just trim back a bit. Overall though, I'm very happy with the purchase!
Scritto da: Excessive Shopper
Exceeded My Expectations
I have an Alumacraft Classic tiller boat (open 16' boat/flat floor) with a 60HP Honda O/B on it. The factory 13 pitch 3 blade prop got the rig up on plane fine but the prop "blew out" even on slight turns with very little trim. I had no idea what my top end speed and RPM were with this prop as the factory gauges are a joke.. I have subsequently upgraded my boat with NMEA2K bus so I can obtain accurate engine info from the Lowrance MFD's onboard. A 13 pitch Nemesis yielded about 29 MPH and nearly 6400 RPM!!! The Honda redlines at 6000 RPM. So I went to the 15P Nemeisis. Now I'm at 32MPH and 6100RPM with a fairly light load. I'd go to a 16P Nemesis if I could but Merc doesn't make one. The boat corners with no prop blow out and handles like it's on rails It will plane at about 21MPH and hole shot is good. I love this prop!!!
Scritto da: ChrisWNY
Nice fit on Mercruiser 3.0 Alpha One Gen 2,
Fairly easy installation on a 2008 Bayliner 175, Mercruiser 3.0 Alpha One Gen 2 engine - if you are replacing an OEM 3-blade prop, you'll likely need to purchase the QuickSilver Flo-Torq II hub kit which is another $50+. Chances are you won't have the correct hub unless you already have a prop with a Flo-Torq II hub installed. Otherwise, the QuickSilver Nemesis 4-blade prop will help your boat break plane faster. More lower-end torque and your top speed should see an improvement as well.
Scritto da: Andrew
If your thinking about it, do it!
My 25hp mercury always seemed like it wasn’t operating at its full potential and made getting on plane loaded a chore. I heard good things about the 4 blade props but was leery to spend the money. One day on the water I had to make a sharp turn to avoid a crazy jet skier and ended up banging up my prop on some submerged rocks. Since my prop needed replacement anyways I figure nows the time! Boy am I glad I did! Feels like a new boat. Much more holeshot and even gained top speed (went with a bit more aggressive pitch based on the prop selector tool) and getting on plane is a breeze even loaded down with tackle and two big guys. Worth every penny. If your thinking about it, do it. I’d recommend using mercury’s prop selector tool (google it) to find the right pitch for your goals.
Scritto da: Amazon Customer
Tres bon produit
c'est un produit original (Mercury) et est arrivé a la date que Amazon avait dit.
Scritto da: Robert J Kowbel
Good buy
Propeller was delivered on time, seems to work good, I was hoping for more out of the hole torque, but maybe my expectations were to high
Scritto da: Amazon Customer
As described
Nice quality
Scritto da: larry graham
From start to midrange nemesis is the why to go
This is a very nice and effective prop let me tell you it stade hookup mercury and quicksilver crossover or the best prop for a mercury outboard ,very happy.

Related products

hot

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array