0
0

Total:€ 0.00

See cartCheckout
LoginRegister
0

Total:€ 0.00

See cartCheckout
LoginRegister

uxcell M4 x 150mm 304 Stainless Steel Fully Threaded Rod Bar Studs Silver Tone 5 Pcs

Brand:uxcell

3.5/5

€
30.80

Made of 304 stainless steel material, meaning these fully threaded rods will not rust no matter how many years you use them for. Fully threaded rods thread along its entire length. Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components.

Amount
Add to CartBuy now

EAN: 0709874233438

Categories Industrial & Scientific, Nails, Screws & Fasteners, Threaded Rods & Studs, Fully Threaded Rods & Studs,

Thread Pitch: 0.7mm. Thread Size: M4 x 150mm/0.16" x 6" (D*L). Main Color: Silver Tone. Weight: 56g; Package Content: 5 x Threaded Rod. Product Name: Threaded Rod; Material: 304 Stainless Steel.
Country of Origin China
Exterior Finish Stainless Steel
Fastener Material Stainless Steel
Grade Rating Grade 304
Item model number a16071500ux0081
Manufacturer Dragonmarts - BISS
Material Stainless Steel
Package Dimensions 6.5 x 5.47 x 0.79 inches; 2.12 Ounces
Thread Size M4 x 0.7

3.5

9 Review
5 Star
68
4 Star
16
3 Star
8
2 Star
4
1 Star
4

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Piedmont SC
Better than Home Depot
Didn't have much selection of threaded rods at Home Depot. Seemed to be just a few options with inches; no metric. Amazon seller had good selection of metric threaded rods. I needed M4 right hand threads and that's what was shipped. Note that some listed were left hand threads. My M4 order did not seem to list hand of threads so I assumed it was right hand. Seems I was correct. To ensure less issues with orders, it would be great if every item in the listing indicated right hand or left hand threads, not just some. Pack of 5 helped me complete the job just fine. Thanks
Scritto da: Timothy K Knechtly
Superb!
Always superb products from Uxcell on Amazon. These are hard to find and I am so glad they were available. Made a micro gear puller for servicing 3D printer steppers that have pressed on gears, etc.
Scritto da: Brandon B
Just what I needed.
Just what I needed. Nice, hard stainless steel. One was slightly bent, but still worked for my purposes (3D-printed robot arm).
Scritto da: Gumby
Returned
Need not meet my expectations, returned
Scritto da: Mr. Phreddy
Good product
Good product
Scritto da: lindaloo
Just what I wanted
I used this item to make fairy garden sticks
Scritto da: J
Worked fine, came bent
They worked fine for what I needed, but all of them came bent in half about 30 degrees. Fortunately I was able to straighten them well enough. M4 nuts screwed on properly.
Scritto da: CR
As described
Good
Scritto da: JOSE D.
Ok
Buen producto aún que caro

Related products

hot
uxcell a16071500ux0021 M3 x 80mm 0.5mm Pitch 304 Stainless Steel Fully Threaded Rods Bar Studs (Pack of 10)
3.4/5

€ 29.11

uxcell a16071500ux0021 M3 x 80mm 0.5mm Pitch 304 Stainless Steel Fully Threaded Rods Bar Studs (Pack of 10)
3.4/5

€ 29.11

hot
Powers Fastening Innovations 08303 1-1/8-Inch Adhesive Piston 1-Inch Rod #8 Rebar, 10 Per Box
0.1/5

€ 25.84

Powers Fastening Innovations 08303 1-1/8-Inch Adhesive Piston 1-Inch Rod #8 Rebar, 10 Per Box
0.1/5

€ 25.84

hot
Die Cast Zinc Metric Adjustable Handle, Threaded Stud, 63mm Length, 28.5mm Height, M8 x 1.25mm Thread, 12mm Thread Length (Pack of 2) M8-12
4.1/5

€ 29.43

Die Cast Zinc Metric Adjustable Handle, Threaded Stud, 63mm Length, 28.5mm Height, M8 x 1.25mm Thread, 12mm Thread Length (Pack of 2) M8-12
4.1/5

€ 29.43

hot
Aggressive Hydraulics 0121000022 Steel Threaded Stud
0.1/5

€ 27.55

Aggressive Hydraulics 0121000022 Steel Threaded Stud
0.1/5

€ 27.55

hot
Nylon Adjustable Handle, S/S Threaded Stud, 1-49/64" Length, 1-3/8" Height, 10-24 TPI Thread, 5/8" Thread Length (Pack of 2) #10-24 5/8 Inches 1-49/64 Inches 1.375 Inches 1.375 Inches 2
4.1/5

€ 31.82

Nylon Adjustable Handle, S/S Threaded Stud, 1-49/64" Length, 1-3/8" Height, 10-24 TPI Thread, 5/8" Thread Length (Pack of 2) #10-24 5/8 Inches 1-49/64 Inches 1.375 Inches 1.375 Inches 2
4.1/5

€ 31.82

hot
Die Cast Zinc Metric Adjustable Handle with Orange Push Button, S/S Threaded Stud, 78mm Length, 55mm Height, M8 x 1.25mm Thread, 25mm Thread Length (Pack of 1) M8-25
0.1/5

€ 28.16

Die Cast Zinc Metric Adjustable Handle with Orange Push Button, S/S Threaded Stud, 78mm Length, 55mm Height, M8 x 1.25mm Thread, 25mm Thread Length (Pack of 1) M8-25
0.1/5

€ 28.16

hot
Medium-Strength Threaded Rod, Grade B7 Black-Oxide Steel, 3/4"-10 Thread Size, 2-1/2" Long (Qty 10 Each)
0.1/5

€ 52.57

Medium-Strength Threaded Rod, Grade B7 Black-Oxide Steel, 3/4"-10 Thread Size, 2-1/2" Long (Qty 10 Each)
0.1/5

€ 52.57

hot
The Hillman Group 44823 5/16-18 x 3-Inch Threaded Rod, 7-Pack
4.1/5

€ 27.03

The Hillman Group 44823 5/16-18 x 3-Inch Threaded Rod, 7-Pack
4.1/5

€ 27.03

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array

Total:€ 0.00

See cartCheckout

Categories

All the categories
Menu Categories Near Cart

Menu