Wall Control ASM-SH-1606 B Deep Pegboard Shelf Assembly for Wall Control Pegboard Only, 6", Black

Brand:Wall Control

3.8/5

€
65.34

The Wall Control Pegboard 6in Deep x 16in Wide Pegboard Shelf Assembly for Wall Control's Pegboard and Slotted Tool Board is made from heavy duty 14 gauge steel and offers great pegboard shelf storage. Unlike most pegboard brands that fall short when it comes to shelving, Wall Control pegboard shelves are heavy-duty and up to the task with their solid construction and attractive finish. Wall Control Slotted Metal Pegboard Shelves and Supplies feature a scratch and rust resistant baked-on finish. These more secure and stable tool board accessories are for use with the slots found in Wall Control Metal Pegboard tool board panels only. Wall Control Slotted Tool board accessories offer a patented engagement that requires two deliberate motions up-and-down to engage and disengage the hooks. This feature makes Wall Control Slotted Pegboard accessories less likely to fall out of the tool board than conventional peg hooks that can easily fall off when tools are removed. Although Wall Control Metal Pegboard Panels will accept conventional 1/4in pegboard accessories as well as Wall Control Slotted Accessories the Slotted Secure Tool Board Shelf Assembly included here is only for use with Wall Control Metal Pegboard Panels and Tool Boards. Wall Control Pegboard Products are Made in the USA (1) Black 6in x 16in Pegboard Shelf Assembly for attachment to Wall Control pegboard tool boards. Wall Control Shelf Assemblies are not for use with Wall Control's 3in Tall Pegboard Strips. Wall Control Shelf Assemblies are ONLY compatible with Wall Control pegboard tool board panels.

Amount

Add to Cart Buy now

EAN: 7258006809438

Categories Industrial & Scientific, Industrial Hardware, Hooks, Pegboard Hooks,

Made in USA. Wall Control slotted tool board shelves are only for use with Wall Control pegboard and slotted tool board. Wall Control Slotted Tool Board Accessories offer a baked-on color finish that is attractive and rust resistant for long lasting aesthetic appeal. Heavy Duty Pegboard Shelving for Wall Control Pegboard Tool Boards.

Age Range (Description)	Adult
Age Range (Description)	‎Adult
Assembly Required	‎Yes
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Wall Control
Brand	‎Wall Control
Color	‎Black
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 974 ratings 4.7 out of 5 stars
Finish	‎Black
Finish Type	Black
Finish Type	‎Black
Furniture Finish	‎Black
Installation Method	‎Wall Mount
Is Discontinued By Manufacturer	‎No
Item model number	‎ASM-SH-1606 B
Item Package Quantity	‎1
Item Weight	‎1.8 Pounds
Manufacturer	‎Wall Control
Material	Alloy Steel, Metal
Material	‎Alloy Steel, Metal
Mounting Type	Wall Mount
Mounting Type	‎Wall Mount
Number of Items	‎1
Number of Shelves	1
Number of Shelves	‎1
Part Number	‎ASM-SH-1606 B
Product Dimensions	6"D x 16"W x 4"H
Product Dimensions	‎16 x 6 x 4 inches
Product Dimensions	‎6"D x 16"W x 4"H
Shape	Rectangular
Shape	‎Rectangular
Shelf Type	Metal
Shelf Type	‎Metal
Size	‎6 Inch
Special Feature	Heavy Duty, Rust Resistant
Special Feature	‎Heavy Duty, Rust Resistant
Special Features	‎Heavy Duty, Rust Resistant

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: mark berentson

Great shelf

So nice I bought another one. I like that it's deep. Holds a good amount of weight without worry. Love this brand. So many options, little price.

Scritto da: Bobby Lee

Nice

Would buy again

Scritto da: mkrg

Fits Wall Control board, but you still have to play with placement of support brackets

I originally had the 6x16” Wall Control red shelf replaced because the support brackets would not fit my Wall Control peg/slat board. After much frustration, I came to realize the openings in my board are not all uniform, thus a bracket that fits in one location may not necessarily fit in another. If you find yourself struggling like I did, try installing the brackets at different spots. Try moving over left or right or even go to a different row! It was absolutely unpredictable! What saved this shelf is that it can connect to the brackets at multiple points in 1” increments. So there are up to 15 points of contact to try your luck with! Now it looks good!

Scritto da: 04CE

Sturdy, acceptable wobble, easy to install, but the shelf can fall off

It's quite sturdy, and I've put a lot of weight on it. That said, there's no mechanism to keep the shelf from simply falling off. It only sits on four tiny little locators. If the shelf was sat down, then slotted into the locators it would be dramatically sturdier. As of now, anything that bumps the shelf (or sticks to it) can cause the whole shelf to pop off and fall.

Scritto da: William D. Guyer

Bought one to test, purchasing 5 more over time, maybe a bit too pricey

I bought one to test and was extremely impressed. I mounted my Wall Control panels approximately 10 inches below the ceiling level with the intention of a adding a shelf. I originally intended a 12" shelf, but the price difference made me feel it was worthwhile to try the 6" first. I'm glad I did. It's perfect for being an out of the way addition to the organization of the panels. In my particular application I will have between 6 and 10 panels along a long wall before my project is complete, and these allow me to recover enough random flat space to make the wall organization usable at that length. I imagine I will put one at the top of each panel. They are very easy to install, secure, and sturdy. However, for the construction on these I feel they are a little overpriced, hence 4 instead of 5 stars. I feel they are premium but not as premium as the price. The locking into the Wall Control specific platform is the reason I will purchase these and the price is the reason I will not purchase any of the larger ones.

Scritto da: William Masterson

Can never have too many shelves!

I purchased two of these shelves as part of an expansion of the garage work station. While there are all kinds of hanging supports and brackets, sometimes you just need a shelf. And with this item, I'm there. Great size that doesn't stand off too far from the wall, and sturdy enough for a variety of items.

Scritto da: dave_g

Serious shipping issues

It’s a shame, Wall Control can’t ship their products without damage. The shelf is nice but for the price it should not arrive damaged.

Scritto da: Edward J.Lamb

Well coordinated

Easy to install, well coordinated

Scritto da: Ioan Leroux

Easy to install Sturdy

Easy to install. Sturdy Color matching. Wish they sold bundle for cheaper prices and more depth version on amazon.

Scritto da: Joey

awsome and sturdy , photgraphy equipment

for my photography equipment, strurdy and i trust that it will hold for a ling time

Scritto da: Robert K.

Very usefull for my metal peg board

This is just the right size and adapts very well to my metal peg board to store various tools , mesuring tapes or other small hardware ..

Scritto da: YJ

Awesome

Love it

Scritto da: Jon Bradley

Heavy duty construction

Well made but specific to a particular type of peg board. Make sure that your peg board fits this shelf - it does not work with all standard peg boards. Heavy duty construction.