Weller 6966C 250 Watts Electric Industrial Heat Gun

Brand:Weller

3.7/5

156.05

PRODUCT DESCRIPTION Weller transforms hand soldering The art of hand soldering has been around for a very, very long time, thousands of years in fact. But it was only until 1941 that a transformer based instant heating soldering method was de­vel­oped by an im­pa­tient Amer­i­can radio re­pair­man who was tired of sit­ting around wait­ing for his sol­der­ing gun to heat up. Carl E. Weller had to wait until after WWII ended in 1945 to get his Weller Man­u­fac­tur­ing Company going. In 1960, the Weller Man­u­fac­tur­ing Co. in the US patented the “Mag­na­s­tat” sol­der­ing iron which used a mag­netic com­po­nent to reg­u­late the tem­per­a­ture at the iron’s tip. In an ex­pan­sion over­seas beginning in 1959, the Weller GmbH plant in Be­sigheim, Ger­many, along with new plants in other coun­tries, was or­ga­nized to man­u­fac­ture tem­per­a­ture con­trolled irons and sol­der­ing guns for pri­mar­ily in­dus­trial mar­kets through­out Eu­rope and the Near East. Keep­ing pace with the in­creas­ing com­plex­ity of our cus­tomers’ needs, Weller Ger­many be­came the mar­ket leader for de­vel­op­ing and man­u­fac­tur­ing hand soldering prod­ucts world­wide. Our prod­ucts were proudly em­bla­zoned with “Made in Ger­many”, sig­ni­fy­ing in­no­va­tion and re­li­a­bil­ity. FROM THE MANUFACTURER The Weller 6966C is a 250 Watt/120 Volt lightweight heat gun that weighs less than a pound. This ESD safe heat gun is perfect for repetitive or continuous use in production plants, labs, and electronics service facilities. The heat guns temperature at nozzle ranges from 750° F to 800° F (399° C to 427° C). Cord length is 6 ft. and cord type is three-wire ground. Heat gun is also UL and cUL listed.

No units available
3 Wire grounded plug, 6' power cord. Package height:1.0". Package width:1.0". Package length:1.0". 3-way switch: Hi-Off-Cool.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Weller
Brand ‎Weller
Country of Origin ‎Mexico
Customer Reviews 4.6 4.6 out of 5 stars 105 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components 1 Weller Branded Product
Included Components ‎1 Weller Branded Product
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 12.2 x 1.57 x 9.25 inches
Item Dimensions LxWxH ‎12.2 x 1.57 x 9.25 inches
Item Length ‎12.2 inches
Item model number ‎6966C
Item Package Quantity ‎1
Item Weight ‎0.04 Pounds
Item Weight ‎0.64 ounces
Manufacturer ‎WELLER
National Stock Number ‎4940-01-037-7268
Part Number ‎6966C
Power Source Corded Electric
Power Source ‎Corded Electric
Product Dimensions ‎12.2 x 1.57 x 9.25 inches
Style Gun
Style ‎Gun
Voltage ‎120 Volts

3.7

8 Review
5 Star
80
4 Star
9
3 Star
7
2 Star
2
1 Star
2

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: JimmyM
Excellent
This compact heat gun gets into places the larger models won't. Very useful in automotive electronics installation and repair. The steam of heat is narrowly focused allowing you to more accurately shrink tubing.
Scritto da: George Berger
Heat when and where you need it; only 250 Watt power draw
Too many times most shops use one of those heavy industrial heat guns for smaller subassemblies and their wiring, blasting heat into the pcbs and on sensitive components in an effort to heat shrink some tubing on a connector. Not with this. This channels just the right amount of heat where its supposed to go. And it doesn't use 1500 Watts of power to do it. I wanted to give this five stars, but it has the annoying habit of falling over a lot. Its design does not allow for a stable rest position on a table. Still, it can't be beat for today's miniature and micro electronic devices.
Scritto da: Nelson
Great for heatshrink tubing
This is an easy to use, well made heat gun. I use it for quickly and easily shrinking heatshrink tubing.
Scritto da: murphus
better and cheaper options are available
I bought this products, as a long time Weller customer. For my particular application (melting and removing CA glue) there are better and more affordable options out there. I'm sure it's fine for heat-shrink, though.
Scritto da: D. Murakami
Good mini heat gun.
I have used the original model for many years. I bought this replacement because I lost the old one. The gun seems to function the same as the old one. The deflector hoods seem to be made of softer material so you have to be careful the tips do not fall off. Also the fit and finish of the tips are not as good as the original. May want to consider using a small hose clamp for good retention of the tips.
Scritto da: F. R. Eggers
It does the job.
I bought it to replace one which was many years olde and lost during a move. It is ideal for shrinking heat shrinkable tubing and for that I highly recommend it. One of the fittings which came with it distributes the hot air around the tubing. It would not be good where a huge amount of heat is required, such as for thawing frozen pipes, but that is not what it is designed for.
Scritto da: sammy
Professional level heat gun
Works great...from a famous name brand..
Scritto da: Super Max
Nice Tool
Wish I had bought this years ago. Works great on heat-shrink tubing and fits into tight areas to shrink that tubing. Seems like a quality tool so far. I'm deducting one star for poor quality control at Weller. My heat gun arrived with one of the heat nozzles missing, #6956, the only one I really needed. Amazon couldn't replace this $2 part alone so the entire heat gun had to be returned and replaced. The replacement had all four nozzles.

Related products

hot
Titan Tools 51886 Propane Heat Gun
2.7/5

€ 111.65

Titan Tools 51886 Propane Heat Gun
2.7/5

€ 111.65

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array