Wilderness Systems Transom Trolling Motor Mount for Kayaks

Brand:Wilderness Systems

3.6/5

145.63

The Wilderness Systems Universal Trolling Motor Mount allows you to easily install a clamp-on style trolling motor with up to 3 H.P. to you kayak. Popular 4-hole bolt pattern attaches directly to the stern of select Wilderness Systems kayak models or can be retro fit to models with adequate mounting surface locations. Can be paired with Wilderness Systems Stern Mounting Plates to accommodate the Radar and ATAK models. This kit does not come “ready to install.” Some DIY installation will be required. Additional hardware and components may be required depending on the mounting location. Use of backing plate is highly recommended if access allows (Not Included). Boat compatibility Any boat with a flat spot on the stern big enough for a power pole. Rectangular hole pattern is 3.75” x 4.75” • Confluence kayak compatibility o Perception – Pilot, Outlaw o Wilderness Systems – RADAR 115/135, ATAK 120/140 (with addition of stern mounting plate) o Wilderness Systems – RECON (without addition of stern mounting plate but requires drilling, hardware, and DIY)

Bracket Weight: 2.7 lbs. Bracket Dimensions: (L) 8.59” x (W) 8.78” x (H) 3.95”. Maximum recommended weight capacity of 45 lbs. Recommended for trolling motors with up to 3 Horsepower and/or 70 pounds of thrust. May not work with boats with a Recess mounting location due to differences in Molds and cutouts. Designed for any boat with a flat spot on the stern big enough for a power pole. Rectangular mounting hole pattern is 3.75” x 4.75”. Heavy duty 13-gauge stainless steel construction. Maximum trolling motor thrust of 36 pounds. Marine Board backing plate keeps motor clamp tight and secure. Transom trolling motor bracket for clamp-on electric trolling motors.
Brand Wilderness Systems
Brand ‎Wilderness Systems
Brand Name ‎Wilderness Systems
Color Silver
Color ‎Silver
Customer Reviews 4.5 4.5 out of 5 stars 131 ratings 4.5 out of 5 stars
Fuel Type ‎Electric
Included Components ‎Motor mount, Screws
Item Dimensions LxWxH ‎8.6 x 8.8 x 4 inches
Item Package Dimensions L x W x H ‎9.33 x 9.21 x 5.79 inches
Item Weight 2.7 Pounds
Item Weight ‎2.7 Pounds
Manufacturer ‎Confluence Outdoors
Material Stainless Steel
Material ‎Stainless Steel
Model Name ‎Trolling Motor Mount
Model Year ‎2020
Mounting Type ‎Transom
Number of Items ‎1
Operation Mode Electric
Operation Mode ‎Electric
Package Weight ‎1.58 Kilograms
Part Number ‎8070085
Recommended Uses For Product ‎For Salt Water
Size ‎One Size
Suggested Users ‎Unisex-adult
Warranty Description ‎1 year Warranty

3.6

9 Review
5 Star
77
4 Star
8
3 Star
7
2 Star
4
1 Star
4

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Aaron Taylor
Unfinished product
It does work. But it's not a finished product. You'll have to make a spacer because the metal is too thin and you'll want a back plate, which it doesn't come with. The screws it comes with are too short as well so it's just a pain. That being said, I am happy with the end product. It's probably worth more like $50.
Scritto da: Sam4040
Solid mount
It is very sturdy, I highly recommend it.
Scritto da: Athanasios Lagos
I like it, could be better
Too small for motor clamp. Had to modify.
Scritto da: Brian Williams
Motor mount
Aligned perfectly with the holes in my Kayak. Very sturdy fir my 2.5 Mercury Outboard
Scritto da: Pen Name
Works good but expensive but no other options
Solid built but thought expensive for what you get. Also, my rear mount trolling motor, the bolts to connect, run right into the units bolt...it works but makes it less stable
Scritto da: Domingo
Great product
Great fit for my kayak. It's a precetion outlaw 11.5 and it's made for a trolling motor. So I purchased this and great fit and sturdy. I did have to cut a small block of wood to make up for the space so the trolling motor would tighten down.
Scritto da: John Paciulli
You need blocking for this to work
The clamp on most trolling motors do not close enough to tighten on the mount. You have to fashion a block of 5/4 as a shim
Scritto da: Adam Neat
Thin, cheaply made
Very thin and cheaply made, sorry i waited too long to return it. Comparing it to the Newport in the pics. The Newport is better made. Lower price
Scritto da: James sherriff
Where the motor mounts onto this part its not wide enough
Part where electic motor mounts on It is not wide enough for clamps

Related products

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array