1/2 pt Minwax 25555 Clear Polycrylic Water-Based Protective Finish Gloss 8 Fl Oz (Pack of 1) Gloss Polycrylic Protective

Brand:Minwax

3.7/5

€
40.56

PRODUCT DESCRIPTION Keep interior wood projects looking beautiful with Minwax Polycrylic Protective Finish. This crystal clear protective finish protects and adds beauty to woodwork, furniture, and more. The clear top coat protects against scratches, scuffs and blemishes to protect the wood surface beneath. This clear sealer dries crystal clear and stays crystal clear, making it ideal for use over all Minwax Oil-Based and Water-Based Stains and colors, as well as all wood species including light woods like maple, ash and birch. The ultra-fast-drying protective coating allows for quick recoats after 2 hours. It’s also easy to clean-up the clear wood finish with just soap and water. This protective wood top coat not only protects the natural beauty of the wood, but offers a shiny, sleek sheen for a bright, modern look. It’s also non-yellowing, non-ambering and low odor. Note: Minwax Polycrylic Protective Wood Finish may appear milky upon opening, but applies and dries to a crystal clear protective finish that lasts. Application: 1. Surface must be dry and free of wax, grease, polish, any foreign matter or old finishes in poor condition. 2. Sand to a smooth, uniform surface. DO NOT USE STEEL WOOL. Remove dust with a damp cloth. Let dry completely. 3. If desired, apply stain such as Minwax Water Based Wood Stain or Minwax Wood Finish stain to bare wood surfaces following label directions. Wait at least 24 hours before applying Polycrylic Finish over Minwax Wood Finish Stain. Can also be applied to bare wood. 4. Stir well before and regularly during use. DO NOT SHAKE. 5. Apply a thin coat of Polycrylic Finish with a high-quality synthetic bristle brush. Apply in one direction with the grain. Do not over-brush. 6. Let dry at least 2 hours then sand with very fine sandpaper (220 grit) to ensure an even finish and proper adhesion of additional coats. Do not use steel wool. Remove all dust. 7. Apply a second coat. For additional coats, repeat Step 6 before applying. Three coats are recommended. 8. After final coat, allow 3 hours before light handling and 24 hours before normal use. FROM THE MANUFACTURER Minwax is America's leading brand of wood finishing and wood care products. From staining and protection, to preparation, maintenance, cleaning and repair, Minwax makes and keeps wood beautiful.

No units available

EAN: 5448095647499

Categories Tools & Home Improvement, Paint, Wall Treatments & Supplies, Finishes, Sealers & Stains, Stains,

Half Pint. Gloss. Fast drying. Low odor, non-yellowing. Water clean-up. EASY CLEAN UP – This water-based wood finish allows for easy soap and water clean-up, so you don’t have to stress about spills and big messes. ULTRA FAST DRYING – Get more done with this protective poly coating. It’s a fast-drying clear coat, which allows for quick recoats after 2 hours, letting you get projects done faster. Be sure to apply with a high-quality synthetic bristle brush. GLOSS SHEEN – Give your wood projects a sleek finish with this gloss clear varnish. It not only protects the natural beauty of the wood, but offers a shiny, sleek sheen for a bright, modern look. It’s also non-yellowing, non-ambering and low odor. CRYSTAL CLEAR FINISH THAT LASTS – The crystal clear finished offered in this protective coating is ideal for use over all Minwax Oil-Based and Water-Based Stains and colors, as well as all wood species including light woods like maple, ash and birch. PROTECT WOOD SURFACES – Minwax Polycrylic Protective Finish protects and adds beauty to your interior wood projects, including woodwork, furniture, doors and cabinets. The clear top coat protects against scratches, spills, dirt and more.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Minwax
Color	‎1/2 Pint
Compatible Material	Wood
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 24,040 ratings 4.6 out of 5 stars
Finish	‎gloss, semi-gloss, satin, matte, ultra flat
Finish Type	gloss, semi-gloss, satin, matte, ultra flat
Included Components	‎Minwax 255554444 Polycrylic Protective Wood Finish, Clear Gloss, ½ Pint
Is Discontinued By Manufacturer	‎No
Item model number	‎255554444
Item Package Quantity	‎1
Item Weight	0.31 Kilograms
Item Weight	‎10.8 ounces
Manufacturer	‎Minwax
Material	Water Based
Material	‎Water Based
Part Number	‎255554444
Pattern	‎Polycrylic Protective
Product Dimensions	‎2.8 x 2.8 x 2.9 inches
Size	‎8 Fl Oz
Style	‎Gloss

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Yamilmi

Good deal

If you're in the market for a top-quality protective finish for your furniture, then the Minwax 63333 Clear Polycrylic Water-Based Protective Finish Satin is the product for you. This one-quart container of protective finish is perfect for anyone looking to give their wooden furniture a beautiful, glossy finish that will protect it for years to come. One of the standout features of this product is that it is water-based, which means that it is easy to clean up after use. Unlike other finishes that require the use of solvents or other harsh chemicals, this product can be cleaned up with just soap and water. It's also low odor, which makes it an excellent choice for those who are sensitive to strong smells. When it comes to the finish itself, the Minwax 63333 Clear Polycrylic Water-Based Protective Finish Satin provides a beautiful, clear, satin finish that enhances the natural beauty of wood. It's easy to apply, dries quickly, and doesn't yellow over time, which is a common problem with other finishes. Overall, I would highly recommend this product to anyone looking for a high-quality protective finish for their wooden furniture. It's easy to use, provides a beautiful finish, and is long-lasting, making it an excellent value for the price. So, if you're in the market for a protective finish, give the Minwax 63333 Clear Polycrylic Water-Based Protective Finish Satin a try - you won't be disappointed!

Scritto da: Don R. Cooper

Great product. Does excellent on wood.

Loved the product and it did a fabulous job on a dresser and two night stands. The only caution about this product is DO NOT SHAKE THE CAN, Use your paint stick and slowly stir. If you shake this product and start to coat, you will have tiny bubbles all over your wood. I found this out from a friend and professional painter. Just remember to slowly stir the product and you can not go wrong.

Scritto da: Anonymous

Not super easy to use

I bought the spray can because I had a pretty intricate wood project that would have been tough to apply the finish using a brush. As anyone who has used the non-spray cans knows, this product can be hard to apply without getting blobs around sharp edges. The spray can is a little better, but it requires some skill to make it work. The spray does not really atomize the poly very well and it's very easy to apply too much and get a drip. I found it's better to apply a very light coat and trust that it will self-level as it dries (which it does for the most part).

Scritto da: Guitarstar

Excellent

Been using this for 3 years weekly. Finally a product that has no strong smell, goes on easy in a milky white color, dries strong & crystal clear within 40 minutes ready for another coat to build a glass like finish. We use a blow dryer to speed up dry times. It washes clean with water preserving brushes. We use this as an encapsulating finish over 5 coats of color water base paint coats applied the day prior for prosthetics. The only con is it can get clumpy in a container. It fully cures in 4 days to a clear sandable finish. I have even used this repainting over a steel powder coated exterior door after using a primer, base gray color water base paint then applying 7 coats with light sanding over a week. It is providing a protective high gloss finish over a steel paint project. Buy It.

Scritto da: Lemons

This stuff is perfect

Goes on easy, dries fast, and dries matte. It's been waterproof tested in our home! I recommend not putting it on too light as you won't get enough coverage and not too heavy as you'll get bubbles. Use medium thickness and go slow with a brush to brush any bubbles out.

Scritto da: JOHN L.

Better than expected.

Con: It's a little expensive. Pro: If you have any spray painting skills at all your results will be good. I built a cabinet using veneer. I didn't want the thin veneer to get to wet and bubble up with a brush on coating so I sprayed a couple very light coats with this first. Then I brushed on with a foam brush two coats from a can for more thickness. Then I lightly sanded with 400 grit sandpaper. Cleaned it up good then sprayed on 2 more coats with fantastic results. Yes, I could have just kept spraying on coat after coat but brushing it on is less expensive and I will have more spray now for future projects.

Scritto da: Whipped cream

What I expected

2nd one

Scritto da: Chris Garlick

Good Product

I use it to finish my paintings. It protects them well and makes them pop.

Scritto da: Amazon Customer

Not worth the price

Works great for what I needed it for but does not worth the price.

Scritto da: Cathy W.

Arrived late

While my product arrived late and was no longer required, the response from the company was quick. The problem was taken care of to my satisfaction. This is a great product.

Scritto da: Vanessa Doyle

Great product but overpriced

Pricey for the small tin

Scritto da: Heather M.

Good product but finishes are not what I expected

The matte finish is still shiny and the gloss finish isn’t shiny enough. It’s too expensive. And I found even after 2 coats it came off after a washed a small spot so had to reapply

Scritto da: Glenna T

NICE!

Love this product and the results are amazing! Will definately purchase again. Very pleased with the company and how quickly they sent it to me. It was also very well packaged!