Air Lift 88204 LoadLifter 5000 Ultimate Air Suspension Kit

Brand:Air Lift

3.8/5

€
875.46

Air Lift adjustable air helper springs level your load, and give your truck, van, or SUV a safer, more comfortable ride. Air springs are easy to install between your existing springs and the vehicle frame. Just add air when towing or hauling a heavy load, and reduce air pressure when unloaded, they are fully adjustable for a great ride. Air Lift air springs eliminate sag, sway, and bottoming out. They are made with rugged, durable components for long, reliable service. LoadLifter 5000 kits are Air Lift's heaviest-rated kits for hauling or towing heavy loads. They have up to 5,000 pounds of leveling capacity, right up to the manufacturer's recommended Gross Vehicle Weight Rating, and are air adjustable from 5 to 100 PSI. LoadLifter 5000 Ultimate kits fit popular vehicles such as ton and one-ton pickup trucks, many Class A, B & C motor homes, and commercial trucks and other severe uses. They also come standard with a limited lifetime warranty and an exclusive 60 day ride satisfaction guarantee. The Ultimate Series Kits have an exclusive internal jounce bumper built inside of the air bag to help absord shock and prevent bottoming out. Kit fits the following vehicles: Chevrolet 1500 Pickup 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 / GMC 1500 Pickup 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018. (Does not fit 07 Classic)

Amount

Add to Cart Buy now

EAN: 0729199882043

Categories Automotive, Replacement Parts, Shocks, Struts & Suspension, Air Suspension Kits,

Lifetime Warranty with 60 day Ride Satisfaction Guarantee. Fitment details listed in the product description. Easy to install with included detailed instructions. Up to 5,000 pounds of load leveling capability. Fully adjustable air springs to level your vehicle when towing or hauling a heavy load for a safe comfortable ride.

Brand	Air Lift
Brand	‎Air Lift
Country of Origin	‎USA
Cover Included	2 Air springs, Mounting Brackets, All hardware needed for installation, Fully-illustrated installation guide See more
Customer Reviews	4.8 4.8 out of 5 stars 477 ratings 4.8 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Exterior	‎Polished
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎88204
Item Weight	‎25 pounds
Manufacturer	‎Air Lift
Manufacturer Part Number	‎88204
Model	‎88204
OEM Part Number	‎88204
Position	Unknown
Position	‎Unknown
Product Dimensions	‎9.5 x 14.5 x 11.25 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Randy A. Reda

Always will buy for truck.

First time. Amazing. I will always put on every truck I own.

Scritto da: The Gun Guy

Great kit.

Great set of bags, getting the one with the internal bumper is worth the extra money, trust me! I've already had my air line come apart (Totally my fault for not paying attention during installation). This is my third truck with air bags, only way to go if you've never had them. This is my first set of AitLift bags, I've always had Firestone RideRite before. Honestly there is no real difference between the products. The no drill mounting and location are identical, the quality of the bags are equal. To me it comes down to which ones you can get for cheaper at the moment you are ordering them. Now if you're not sure if you should install single or dual path then do both. If you are buying a compressor rig for dual path for twice the money because you might need it once in awhile DON'T, get the single path and think about it! The beauty of air lines is that you can actually do both for a back up. Go to a napa truck center, or any tractor trailer parts store (Or order on here) and get a 1/4" air line valve and put it in between. However from their plumb the rest of the system as single path (so if that confused you, plumb dual path from the back of the truck to the bags. Plumb single path from the compressor to the bags. then install a shut off crossover line between the back lines) This will let you run the system single path (crossover line open) on a normal day for everyday ride, or single point hauling such as a bumper pull trailer. However if you have a random side heavy load, air it up until the heavy side is riding where you need it then close the crossover valve and bleed the lite side down until it's riding rite (or you can inflate each side thru the Schrader valves if you have access to an air fill station at that time) I actually put mine together with a 12v ball valve on my crossover line so I now have a switch inside the cab for single/dual path. I also installed a push button bleed valve for each side so I don't have to bleed off the Schrader valves. Final hint, air line and fittings are way cheaper at a napa truck center or a tractor trailer parts store. You can also find the other things I've been talking about. Good luck.

Scritto da: Shaun T.

I love my airbags

I put these on as a last ditch before going to a larger tow vehicle. The best way I could describe my towing experience with my large RV trailer was a small boat bobbing in moderate seas. While this product will not bolster your GAWVR, it will stabilize the snot out of it. I put these on and after attaching the trailer, I put 20lbs in each bag and went camping. The ride was WAY better. The bobbing and rocking, even with a 4-way sway hitch, made for a more comfortable ride. One which, I may add, did not leave me with a clenched jaw for 4-6 hours. The rear end tends to be a little stiff when not under load, so make sure to air back down and follow the instructions Airlift provides. You do need to check the air at least monthly. Make sure you don't lose a socket in the frame!

Scritto da: Jim D.

2008 Silverado (1500) Air Lift LoadLifter 5000 Ultimate Rear Air Bags

Air Lift LoadLifter 5000 Ultimate Rear Air Bags installed without any issues on my 2008 Silverado 1500. I have Rough Country 5" lift kit that has 3" blocks in the rear. Installed air bags with 2" spacer. Air Lift only has 2" and 4" steel spacers so it was a toss up on which one to install. Ride height at minimum pressure of 5 psi is 1/4" higher and ride is basically the same as without them, which is a good thing. It seems like adding 20-25 psi for 1,000 lbs of load is about right. 25-30 psi for 1,000 lbs, 35-40 psi for 1,500 and 45-50 psi for 2,000 lbs. I never load more than 2,000 lbs so not to overload axle. Air bags restore level and stability with heavy loads. Drives and rides better with heavy loads and no more blinding other drivers at night with a heavy load.

Scritto da: Chuck McLaughlin

Great product, easy to install and performed very well!

Took a lot of bounce out of truck while towing trailer.

Scritto da: MontanaMac

Good airbags but poor installation hardware

These airbags themselves are great quality, but the installation hardware is poor, and you are required to discard valuable stock parts. The GOOD: 1) Airbags are made with high quality Goodyear rubber. 2) Mounting brackets are heavy duty and well made. 3) The internal jounce bumpers seem like a good idea, and allow the bags to run with no air. The BAD: 1) The installation requires that several hose and wiring brackets be discarded. These do actually serve a purpose, keeping brake lines and wires from rubbing and chafing. There is no provision in the kit to secure these lines, and the potentially could lead to a serious problem if wires get cut, or brake lines wear through. 2) The installation on a 2011 GM truck requires you to fish a couple bolts through small frame holes. To secure that bolt, it is pretty tricky to drop a socket in the hole, then attach the socket to the ratchet inside the frame. The UGLY: 1) The installation call for TWO large frame clamps to reposition the e-brake cable, but ONLY ONE is included in the kit! This is not an accidental omission either, since the parts list explicitly specifies 1. Has no one noticed this problem in 3 years? 2) The U-bolts are too long. This means that there is a lot of thread hanging down, but more importantly that the nut runs out of thread before it is properly torqued. You must add washers to avoid the problem of the nut running past the thread. 3) The U-bolts are too wide for the frame. The bracket may slip side to side since there is at least 1/2" empty space to slop around. 4) Allowing brake lines and wires to rub and tangle is both BAD and UGLY, since it has the potential to cause damage to safety-critical components. The GM engineers put those line holders and brackets there for a reason, but Airlift carelessly discards them. Overall, I am happy with the quality but very disappointed with the installation.

Scritto da: Amazon Customer

Takeshi your time to installer them

Good product

Scritto da: Michael L.

Easy of install, works amazing

This product was amazing, installed in about an hour. Make sure you purchase the “T” connection that comes with air kit Air Lift 21838 Union Tee. This will allow one port to evenly lift both sides. Also means only drilling one shredder valve in your bumper

Scritto da: Hunterrev

Great Seller

Air bags were exactly as ordered and fit my truck perfectly and easy to install. The package was quite damaged and thankfully the parts inside were all accounted for and no damage to the parts inside.

Scritto da: Amazon Customer

Great product

It came super fast and was really easy to install with minimal tools needed. Great product!

Scritto da: Amazon Customer

Great product

Great product and simple instillation.