Anderson Metals - 57001-1616 Brass Hose Fitting, Connector, 1" Barb x 1" Male Pipe 1" Barb x 1" NPT Male

Brand:Anderson Metals

3.7/5

€
39.28

This Anderson Metals brass compression hose fitting connector has a male end for connecting to threaded pipe conforming to National Pipe Thread (NPT) standards and a barbed fitting for connecting to a hose. The barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately), and a male NPT connector on the other end connects to threaded pipe to form a tight, fixed connection This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel, and the relative softness of brass threading when compared to other metals allows for a tight seal to resist leaks. This connector has a temperature range from -32 to +140 degrees F and is suitable for use in hydraulic, pneumatic, and plumbing applications. Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

Amount

Add to Cart Buy now

EAN: 0719852920410

Categories Industrial & Scientific, Hydraulics, Pneumatics & Plumbing, Fittings, Hose Fittings, Barbed Fittings,

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories. Intended for use with hose clamp or crimp type ferrule (sold separately).Note: Kindly refer size chart image before purchase. Temperature range from -32 to +140 degrees F. Barbed shank provides secure connection to hose. Relative softness of brass threading when compared to other metals allows for a tight seal. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Brand	Anderson Metals
Color	Brass
Connector Type	Barb and Male Pipe
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Brass
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	3 x 2 x 2 inches
Item model number	57001-1616
Manufacturer	Anderson Metals
Material	Brass
Number of Pieces	1
Product Dimensions	3 x 2 x 2 inches; 4.66 Ounces
Size	1" Barb x 1" NPT Male
Thread Size	1 inch
Thread Type	NPT

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Amazon Customer

good Review

Good Review

Scritto da: J. Stright

1 inch NPT barb connector

Nice brass fitting with exact size measurements

Scritto da: Hybrid_john_33

Does the job

The guys say it works flawlessly underwater while diving. No kinks

Scritto da: gardy constant

That is fit and of good quality

Just what I needed, good quality

Scritto da: Daryl

fitting pipe size fits loose

the 3/4" pipe thread was 100% correct & solid material but the barbed section fits sloppy in 3/4" plastic water line. Wasted money here

Scritto da: John W. Woodhull

Barb diameter too small for black polyethylene irrigation tubing - not a good application

Used this adapter to connect a threaded 3/4" valve to 3/4" black polyethylene irrigation tubing - the ID of the 3/4" tubing is clearly larger then the barbs so seal is very poor and water drips from the fitting. I plan to replace this with a threaded copper fitting to transition to 3/4" copper tubing and then connect that to the irrigation tubing, I think that will work better. The barbs are likely fine for other uses, but not for this.

Scritto da: Keith N

Fix/upgrade your Sears C3 air pump hose

I purchased this to fix my Sears C3 air pump hose and I also purchased a CTA Tools 1930 Straight Lock-On Air Chuck . It fits ~too~ perfectly in the hose. It will need to be hose clamped on or I used cable ties to secure. I wish I did not take a earlier review recommendation on a 3/16 inch and purchased one size larger like the 1/4" male to get more of a snug fit. To connect both brass parts, I used plumbers tape wrapped twice to stop air leaks. Use a cigarette lighter to carefully melt nylon webbing after making the cut to control nylon covering the hose from fraying. Tip: You can pinch the hot melted nylon beads to flatten and making it a even spread. Be Careful.. ..It is HOT and may stick to fingers if is really hot. Tip and Caution! I should also add.. that do NOT pump air if chuck is NOT attached to tire or you can possibly damage your pump because if not attached to your tire, you are compressing air in just the hose giving you pump some serious abuse. After filling air in tire, make sure to release compressed air left in the hose my pressing the metal in the air chuck.

Scritto da: Meowsef 907

Fantastic

The media could not be loaded. Great quality , great price, better than oem part from doorman and half the price.

Scritto da: Torsten

Does not match domestic plumbing standards.

Please beware that the 1 1/4" barb will not fit domestic poly pipe (used for wells, etc). A domestic barb fitting would be 1 1/4" ID. These are 1 1/4" OD. So they are way too loose - like a hot dog in a hallway :) Additionally, the male pipe thread is not a perfect match for NPT. The fit is off a bit - you'll need lots of thread sealant to get a leak-free fit. Overall do not buy unless you need a barb for 1 1/4" ID hose/pipe.

Scritto da: Jarred D

Nope!

Happy to find this on Amazon but….Barb end shorter then I expected which doesn’t give me the confidence for the application. Barb end is too loose like others have mentioned for well water piping. A big no - returned, looks like I will be reusing plastic fitting.

Scritto da: Bianca Jacob

1"barbx3/4"pipe thread.

Perfect fit.one inch barb and 3/4pipe thread.does contain led.not for drinking but other than that.good quality exactly as described.enough thread and plenty of barb to put 2 clamps if needed side by side.tight fit for 1"inner diameter pipe.

Scritto da: Marc Lake

Not as pictured...

The barb was much shorter than shown in illustration. Did not feel there was enough room for two hose clamps so I returned item.

Scritto da: Anthony McQuillan

Good quality and reasonable price

Good quality, reasonable price and fast shipping.