AprilAire 5844 Humidifier Installation Kit for AprilAire Whole Home Humidifiers with Automatic Control, Compatible with AprilAire Humidifier Models: 400, 500, 600

Brand:Aprilaire

3.2/5

€
177.37

This AprilAire 5844Z Humidifier Installation Kit contains all components for step-by-step installation of an AprilAire Whole Home Humidifier with Automatic Control, Models 400, 500, 600. Convenient kit saves you time and money over purchasing supplies individually. AprilAire introduced the first evaporative humidifier for forced air furnace systems back in 1954. Since that time, AprilAire continues to lead the industry in whole home humidification systems. Our evaporative humidifiers work by piping water into the distribution tray located at the top of the humidifier. The water is uniformly distributed across the width of the tray and through a scientifically designed system of outlets. It flows by gravity over the Water Panel evaporator. Dry, hot air from the HVAC system moves through the moisture-laden Water Panel evaporator. Natural evaporation takes place, meaning the water is turned to vapor, and the humidified air is circulated throughout your home. WHAT'S IN THE BOX? 25-feet of 18/2 Thermostat Wire 10-feet of 18/2 Thermostat Wire 10-feet of 18/5 Thermostat Wire (4) Twist-On Wire Nut Connectors 25-feet of 1/4-inch OD Supply Tube 10-feet of 1/2-inch ID Drain Tube 5/8-inch Hose Clamp 6-inch Round Duct Collar 2-feet of 6-inch Round Flex Duct (4) #8 x 3/4-inch Self-Drilling Screws

Amount

Add to Cart Buy now

EAN: 0686720004032

Categories Appliances, Large Appliance Accessories, Humidifier Parts & Accessories, Accessories,

HUMIDIFIER ELECTRICAL COMPONETS: 18/2 Thermostat Wire (25 ft.) connects Automatic Humidifier Control (Humidistat) to Outdoor Temperature Sensor, 18/2 Thermostat Wire (10 ft.) connects Humidistat to Humidifier, 18/5 Thermostat Wire (10 ft.) connects Humidistat to furnace, and (4) Twist-On Wire Nut Connectors. HUMIDIFIER PLUMBING COMPONENTS: ¼" outside diameter (OD) Water Supply Tube (25 ft.) connects Humidifier to a water source, ½" interior diameter (ID) Drain Tube (10 ft.) connects Humidifier to floor drain, and ⅝" Hose Clamp fastens the Drain Tube to drain connection. HUMIDIFIER MOUNTING & BYPASS DUCTING COMPONENTS: (4) #8 x 3/4 Mounting Screws attach Humidifier to furnace air supply or return duct, 6" Round Duct Collar connects Bypass Flex Duct to furnace air supply or return duct, and 6" Round Bypass Flex Duct (2 ft.) connects Humidifier to 6" Duct Collar. COMPLETE INSTALLATION KIT: No need to find the parts yourself! This kit contains all components for installation of an AprilAire Whole Home Humidifier with Automatic Control, models 400, 500, 600. Reference installation instructions and template included with every AprilAire Humidifier before installing. BUY WITH CONFIDENCE: This genuine AprilAire Humidifier Installation Kit was designed and manufactured in the USA by AprilAire – the inventor of the Whole Home Evaporative Humidifier, and the leader in Indoor Air Quality solutions, to optimize installation of AprilAire Whole Home Humidifiers with Automatic Control.

Brand	Aprilaire
Color	Black
Country of Origin	USA
Item model number	5844Z
Manufacturer	Research Products Corporation
Model Name	Humidifiers Parts and Accessories
Product Dimensions	0.5 x 120 x 0.5 inches; 3.35 Pounds
Product Dimensions	0.5"D x 120"W x 0.5"H
Special Feature	Whole-Home Humidifier Installation Kit

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Kevin R.

Complete

Everything you need except for tools.

Scritto da: Dylan Hanson

Wires are shorter than expected.

It would be nice to get a longer length of wire. It is not a complete kit and will require wire nuts as well. I recommend not using the piercing valve or plastic tube as it can get brittle and leak. It’s best to get its own dedicated valve and using copper tube. As the supplies tube is only for cold water.

Scritto da: Amazon Customer

Works!!

My "go to" brand.

Scritto da: mghalib

You don't get a whole lot

As mentioned by other reviewers, you don't get a whole lot. They only provide a bare minimum and even less. The flex duct is too short. They expect you to install the humidifier and the cold air duct right next to each other. If you install a different way, then the flex duct will not be enough. I ended up buying two elbow ducts. The four screws they provided is for humidifier only. For the switch, you need your own screws. The four wire connectors are also not enough. But they do provide longer hose and pipe than you need. You could get your own from a hardware store for a lot cheaper and more than you need.

Scritto da: Kat

Great for the price

New furnace. Needed a new humidifier..

Scritto da: DANIEL K WELLS

Not much for the cost.

So, the 6" duct work is about 3' long. That is to make the bend and bridge the gap between humidifier and the return. That might be ok for some installations, but not most. Wires are not overly generous. Basically, you could do better buying items separately. There is absolutely no instructions or labels for the items to understand how or for what they are to be used. Wiring needed to be stripped to see what is what.

Scritto da: Lisa

A while lot of money for not much stuff.

I wasn’t comfortable using the plastic water supply tube with hot water so I threw it out and used copper. The flexible slinky-duct is too short, cheap and just not a good idea for a relatively low pressure-delta application. I threw it out too and used sheet metal. You can get take-off collars and some control wire at Lowes for pretty cheap.

Scritto da: james magee

Not really complete

Probably would have been less expensive if I purchased a local store. But hoping it was “complete”. It would save me time. Not enough screws and not tie straps to fasten flexible vent. Had to run to hardware store to complete install