Bosch 1/2 In. X 6 In. Hex Shank Hammer Drill Masonry Bit LBHX010

Name: Bosch 1/2 In. X 6 In. Hex Shank Hammer Drill Masonry Bit LBHX010
Brand: BOSCH
SKU: 0000346630657
Price: 31.07 EUR
Availability: InStock

Brand:BOSCH

3.6/5

€
31.07

Bosch Hex Shank Hammer Drill Masonry Bits deliver 4X life vs. standard masonry bits, and have been redesigned with hex shanks for use in hammer drills and impact drivers. These bits feature asymmetric diamond-ground carbide tips, which deliver fast drilling and longer bit life in hammer drills and impact drivers. The tips are designed for precise starts and less bit walking. The bit heads are manufactured with exclusive Bosch-made carbide. They have milled U-flutes with deep-cut spirals for fast drilling in block, masonry and concrete. The hex shank provides aggressive gripping power.

No units available

EAN: 0000346630657

Categories Power & Hand Tools, Power Tool Parts & Accessories, Power Drill Parts & Accessories, Masonry Drill Bits, Rotary Hammer Drill Bits, Drill Bits,

Milled U-flutes with deep-cut spiral – delivers fast material removal. Exclusive Bosch-made carbide – delivers outstanding durability under heavy loads. Upgraded hex shank – allows use in impact drivers and hammer drill/drivers for added versatility. Asymmetric diamond-ground carbide tip – allows for fast drilling and longer bit life. Carbide-tipped masonry bit with upgraded hex shank design – engineered to provide long bit life and fast material removal.

Batteries Required?	‎No
Brand	BOSCH
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 198 ratings 4.6 out of 5 stars
Included Components	‎
Item model number	‎LBHX010
Item Package Quantity	‎1
Item Weight	‎0.01 ounces
Manufacturer	‎Bosch
Material	Diamond
Material	‎Diamond
Package Dimensions	‎7.87 x 1.77 x 0.43 inches
Part Number	‎LBHX010
Shank Type	Hex
Surface Recommendation	Alloy Steel
Tool Flute Type	Spiral

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Bob K

Worked great, no problems

I needed to drill a 1/2 in by 5 in hole in some concrete, for an anchor. I have a couple of regular drills, an impact driver, and a hammer drill. Because this has the 1/4 shank that looks like it fits an impact driver, I thought I'd give it a shot first.... It's not the fault of the drill bit that the impact driver didn't perform well, but the purpose of the 1/4 shank is lost if an impact driver isn't appropriate for the task. I knew that the "regular" drills would be a waste of time... which is why I bought the hammer drill. I was concerned about using the hammer drill with this bit. Other 1/2 bits that resemble this one, shred when they're put between the hammer drill and concrete. The other bits are only useable for a couple of inches before the stress causes them to fail. This bit performed very well.... and produced a very nice hole. Upon examination, it appears the "teeth" have suffered very little (if any) damage and will live in my tool box until the next time I need such a hole.

Scritto da: Thomas Marrone

Rapid cutting through cinder block.

Had several holes (10) to drill through residential cinderblock walls. This bit cut through all ten. It's a little scuffed but head looks ready for many more.

Scritto da: aolshove

Man, this thing went dull quick.

I recommend using this with water or something. When I used it with aggregate concrete, the rocks just stopped it cold. I barely got two holes out of this bit before I quit and decided that two holes is enough.

Scritto da: randolph v.

On time

Nice bit fit perfect

Scritto da: DaleDapkins-2timewinner of LorianHemingwayShortStoryCompFirstPrizein TennWilliamsShortStorycomp.

it works

it works

Scritto da: Amazon Customer

Made it through 2-1/2 holes

Drilling four holes to mount something in garage floor. Each one about 2” deep to put in drop in anchors. Stopped working half way into the third hole. Had to finish using older smaller bit to drill to depth and use this one to make them correct diameter. Used hammer drill that is 2500 rpm max and held trigger about half way to stay under rpm guidance.

Scritto da: G

Fantastic

High quality auger. Went through 12 inches of pressure treated lumber like a knife through butter. Would definitely purchase again.

Scritto da: Norberto Sanes

Barreña para concreto

Muy practica y útil.

Scritto da: pazoo

Decent bit with obvious limitations.

Bought to try drilling holes in concrete with my dewalt impact driver, I have a proper SDS but wanted to see how the impact would fare. When drilling cured concrete full of aggregate, it does work, just not all that fast. Going slow and using water helps a little, but has a hard time with rock. Would be much more suited to brick, tile, or other masonry. Limited by the 1/4" hex shank as anything with more torque would snap the shank, but a good option for softer materials or if you only need a couple holes in a tight space. A good backup option or something to keep in the toolbag.

Scritto da: Daniel

Cut through tile so easily

Drilling into floor tile, made the job a breeze!

Scritto da: Chris Wilkinson

Great masonry bit

Great bit did the job quickly and cleanly. Bosch makes great quality products.