DROK 200085 3v to 5v Boost Converter, Slim DC 3-5v to DC 5 V 3A Step Up Voltage Regulator Module Volt Transformer Board Power Supply

Name: DROK 200085 3v to 5v Boost Converter, Slim DC 3-5v to DC 5 V 3A Step Up Voltage Regulator Module Volt Transformer Board Power Supply
Brand: DROK
Price: 30.76 EUR
Availability: InStock

Brand:DROK

3.1/5

€
30.76

Parameters: Working Voltage: DC 6V-90V(the output voltage is 0-100 percent of input voltage) Potentiometer: Resistance B10K; Line 20cm; Hole 8mm Control Power: 48W-720W Rated Current: 8A Maximum Current: 15A Speed Adjustable Range: 0%-100% PWM Frequency: 16KHZ Dimension: 64 89 28mm Net Weight: 75g Note: The power supply should be DC, can't be AC, or the DC motor speed controller will be burnt. Please make sure the connection with power supply is correct, or the speed controller will be broken. The positive and negative of motor can be ignored, when the running direction is inconsistent with the expectations, you can adjust the order of the cable to change the orientation. Adjust potentiometer knob, which can change the output occupying vacancy proportion of controller, to change motor speed. Package Includes: 1 x DC Motor Speed Controller

Amount

Add to Cart Buy now

EAN:

Categories Tools & Home Improvement, Electrical, Electric Motors, Mounts & Accessories, Controls,

Connecting external positive negative switch can achieve positive inversion function. Can be controlled by external 0-5V, and used on PLC to control motor speed directly. Adjust the knob of potentiometer to change the output occupying Vacancy proportion of controller, and the motor speed will change. Adjust the order of the cable to change the orientation; can control motor speed to change from 0 percent to 100 percent , and it is noise free when motor is at low speed. With a standard size(5mm*20mm) 15A fast Fusing ceramic fuse, and power reversed connection protection and over-voltage protection, more safe to use.

Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	200085
Manufacturer	DROK
Package Dimensions	5.4 x 3.3 x 1.8 inches; 3.53 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: WH7QQ

Works well and was easy to hook up.

Amazon, for some weird reason, on my orders shows this as an "up" converter which it absolutely IS NOT. It is a very usable PWM type speed control for DC motors. I have it working to control the DC gear motor from an old battery drill and it gets its power from a DC power supply from an old, dead laptop (18v 6A). It does my job perfectly. If you are looking for an up converter, look elsewhere.

Scritto da: GT

Works properly, no problems

What I ordered was "Motor Speed Controller, DROK DC Motor Speed Control 6V-90V 15A 1000W 16KHZ PWM Controller 6V 12V 36V 60V 90V Speed Regulator Module Board Support PLC Control " and that's exactly what I got. I installed it and it works without issue. MUCH cheaper than replacing the entire unit. A+

Scritto da: MARIUS

Easy to use but it doesn't have Forward/Backward function

I intended to use the product together with a Raspberry Pi and realized shortly that it doesn't have a built in Forward/Backward function. Everything else is good.

Scritto da: LUIS PEÑA

Excelente controlador

Es muy fácil de usar. Lo usé para controlar la velocidad de un motor reductor que acondicione a mi máquina de coser...

Scritto da: brian collinsworth

Awesome

Works great. Slowed my scavenge pump down to quiet it up.

Scritto da: John Gennero

Works well

Does exactly what it's supposed to do. Would buy again.

Scritto da: Earthly Traveler

Reliable so far.

Work as promised, no complaints.

Scritto da: Olle Gladso

Great for controlling relatively high voltage DC loads.

Perfect! I use it as a controller for an electric resistance heater in an electric vehicle.

Scritto da: Tate

Great voltage converter...

I used this to drop 18 vDC from an M18 Milwaukee power tool battery to 12 vDC output to operate a kid's electric ATV ride-on. The Milwaukee (or your own favourite tool manufacturer - yellow, green, orange, whatever) batteries are easier and quicker to charge than the OEM gel battery which is lead-acid. This allows me to adjust the output so that I don't overload the 12 vDC motors...or add a "turbo" feature for more excitement! Note: the potentiometer is a 10 k-ohm one and the circuit board needs to be under load to see the true motor output. If you test the motor voltage while not loaded, it won't show much difference from the input battery voltage. Basically, it works and works well.

Scritto da: Amazon Customer

Works Great

Using it to power my girls Power Wheels with a couple of 18V batteries and this items works perfectly for this. I've tried a couple of the other ones with a lower current rating and they burnt out after a short while. I wouldn't hesitate to buy another one of these should I need a similar converter.

Scritto da: Daniel G.

No component numbers

It seems to work with the included potentiometer. However it seems that the component numbers have been erased from the IC and all of the MOSFETs, so there is no way of telling what the circuit is. I needed to make some changes to work with a hall sensor throttle but I can't tell what the components are. I don't understand this seemingly deliberate obfuscation.

Scritto da: Marcel Bourgoin

seems to work ok

heat sinks a little small when using above 60 V @ 10 A it over heats

Scritto da: Amazon Customer

Good choice

worked asnavertized no problem setting