E-Z Lok Threaded Inserts For Metal; Assortment Kit; Carbon Steel; Metric Internal Threads, M3-0.5, M4-0.7, M5-0.8, M6-1.0, M8-1.25; 50 pieces M3-0.5, M4-0.7, M5-0.8, M6-1.0, M8-1.25; 50 pieces Carbon Steel, Heavy Wall

Brand:E-Z LOK

3.5/5

€
124.59

The E-Z LOK threaded inserts kit for metal is a 50-piece set of solid, heavy wall, carbon steel, self-locking, metric coarse thread inserts for use in metal, packaged in a case with a compartment for each of five different sizes: M3-0.5, M4-0.7, M5-0.8, M6-1.0, and M8-1.25. These inserts are self-locking, with pre-applied Loctite on the external threads that is ready to use in 3-5 minutes and seals against liquids and gases to 6,000 psi when fully cured (72 hours after installation). They fit holes made with standard drill and tap tools, and install with a flathead screwdriver or bolt and jam nut (installation hardware sold separately). The inserts are made of American Iron and Steel Institute (AISI) 12L14 carbon steel, which is cold drawn for better tolerance and strength than hot rolled steel. This steel has a Rockwell hardness of B84 and an ultimate tensile strength of 78,300 psi. SPECIFICATIONS Quantity of Inserts Insert Part Number Internal Thread External Thread Length Tap Drill Size Tap Size Min. Full Thread Depth 10 450-3 M3-0.5 M6-1.0 6.5mm 5.1mm M6-1.0 7.8mm 10 450-4 M4-0.7 M8-1.25 7.5mm 6.9mm M8-1.25 9.0mm 10 450-5 M5-0.8 M8-1.25 7.5mm 6.9mm M8-1.25 9.0mm 10 450-6 M6-1.0 M10-1.5 10.5mm 8.6mm M10-1.5 12.0mm 10 450-8 M8-1.25 M12-1.75 12.5mm 10.4mm M12-1.75 14.5mm Externally threaded inserts are used to repair a hole with stripped threads, or to install a new threaded hole. The hole must be tapped to the correct size, then the insert is installed; it is anchored by an adhesive or locking elements. E-Z Lok manufactures threaded inserts for use with metal, plastic, and wood. The company, founded in 1956, is headquartered in Gardena, CA.

Amount

Add to Cart Buy now

EAN: 0839137004892

Categories Industrial & Scientific, Nails, Screws & Fasteners, Threaded Inserts, Externally Threaded Inserts,

STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool. FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc. AVAILABLE OPTIONS – Kit is available in carbon steel threaded inserts and stainless steel threaded inserts that are easy to install with standard tools. QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair kit. THREADED INSERTS FOR METAL – E-Z LOK Threaded Insert Assortment Kit for metal. Threaded inserts for putting strong, machine threads in metal.

Exterior Finish	Black Phosphate
Fastener Type	Insert
Item model number	EZ-M100
Manufacturer	E-Z LOK
Material	Steel
Metal Type	Aluminum, Alloy Steel, Carbon Steel, Iron, Magnesium
Product Dimensions	1 x 1 x 1 inches; 9.77 Ounces
Thread Size	M 3,M 4,M 5,M 6,M 8,M 10,M 12

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Kevin M.

Quality materials

Used these to rethread a diesel blocks head studs. They have a nice fitment with my snap on tap. They have a nice fit with ARP studs. The selection is nice as well.

Scritto da: Was not what was showed

Was not what was showed in the picture at first

Didn't have the sizes in the set that I needed

Scritto da: Just Richard

Tapping soft materials is a mug's game see? Use threaded inserts instead.

Ordered a set of US std and a metric set. Received 2 metric sets in error. Found the barcode/content label was incorrect- it was for the US set but put on a metric (M100) kit. Returned that to Amazon. Hope they sort out the label before reselling it. These are just great for getting a really solid thread in a soft material like aluminum or plastic. Kit comes in handy so you have just the size you need.

Scritto da: Jason

Great product, evenly machined and versatile

E-Z Lok Inserts are great, I use them for a lot of different woodworking projects. The one problem is they don't offer as many thread pitch options as possible. They should increase their thread-pitch options, that would make them a more versatile option.

Scritto da: Vernon Austin

order loctite just in case

worked as stated in description. just have to make sure you drill the right size hole for insert

Scritto da: Sean R. Plantz

Good set!

Not bad collection for the price, wish they would use something other than letter sizes for the drill required though, not that its hard to figure out, but really dont know many people who know the equivalents off the top of their head.

Scritto da: Thomas Williams

Fast shipping

Exactly what I ordered & as describe

Scritto da: Sean R. Plantz

Threaded inserts

They do what they say, and hold up much better than helicoils. Just wish they would show decimal/fractional equivalents on the data sheet inside, not everybody knows letter drill size to fractional/decimal.

Scritto da: Emmanuel Germain

Quality and durable inserts

When possible to drill and tap a bigger hole these are by far the best solution. Much stronger than a helicoil and if something happens to your inner threads you can heat them up and remove them and just install new ones. They worked perfectly for my application in cast iron.

Scritto da: Herman Dyck

Great kit

This is a high quality kit that met my needs perfectly

Scritto da: Serge

Parfait

Parfait