GEARWRENCH Flare Nut Wrench, 3/4" x 7/8" - 81685

Brand:GearWrench

3.6/5

€
55.05

PRODUCT DESCRIPTION 15° offset wrench heads Manufactured from alloy steel for better strength and longer tool life Sizes stamped on both sides of the wrench beam for quick identification 15° offset wrench heads Manufactured from alloy steel for better strength and longer tool life Sizes stamped on both sides of the wrench beam for quick identification Bright, full polish chrome finish easily wipes clean and resists corrosion Hex shaped heads give more points of contact on the fastener to prevent damage Ideal for use on hex nuts made of softer materials ASME Specification : Meets or Exceeds Tether Ready : No Flexible : No Overall Length : 8.858 Size : 3/4 in x 7/8 in ANSI Specification : Meets or Exceeds End B Width : 0.516 Weight (Catalog) : 0.60 Warranty : Limited Lifetime End B Thickness : 0.539 End A Drive Type : Flare Nut End B Offset Degrees : 15 End A Fastener Size : 3/4 in End B Drive Type : Flare Nut End B Fastener Size : 7/8 in End A Width : 1.323 End A Thickness : 1.461 Length Format : Standard Finish : Full Polish Chrome SAE/Metric/Torx : SAE UPC : 099575816857 End A Offset Degrees : 15 Drive Type : Flare Nut Material : Alloy Steel FROM THE MANUFACTURER GearWrench Flare Nut Wrench

Amount

Add to Cart Buy now

EAN: 0099575816857

Categories Tools & Home Improvement, Power & Hand Tools, Hand Tools, Wrenches, Open-End Wrenches,

Package dimensions: 22.86 cmsLx7.874 cmsWx2.794 cmsH. Product type: Wrench. Package quantity: 1. Country of Origin: China.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	GearWrench
Brand	‎GearWrench
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 161 ratings 4.5 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Polished
Finish Type	‎Polished
Head Style	‎Flare Nut
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	2 x 2 x 1 inches
Item Dimensions LxWxH	‎2 x 2 x 1 inches
Item model number	‎81685
Item Package Quantity	1
Item Package Quantity	‎1
Item Weight	0.6 Pounds
Item Weight	‎0.6 Pounds
Item Weight	‎9.6 ounces
Manufacturer	‎GearWrench
Material	Alloy Steel
Material	‎Alloy Steel
Measurement System	‎Inch
Operation Mode	‎Mechanical
Part Number	‎81685
Product Dimensions	‎2 x 2 x 1 inches
Size	‎3/4" x 7/8"
Warranty Description	‎Lifetime

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Tim

I love this little ratchet

I use this almost every day. It fits my pocket along with a couple of bits and can get into place other drivers can not. The fine ratchet gears allow it to ratchet without turning the screw in the reverse direction. Plus it's nice and shiny. I have a small earth magnet that keeps it together with a few bits in my pocket. I would recommend it.

Scritto da: MFB

Just as described

Just as described

Scritto da: patrick l zink

wrench is goood but just a little thick for rv gas bottle connections

wrench was designed for torque , it worked but is almost too wide to fit the connection at the gas regulator .

Scritto da: Dennis Hanks Sr

Strong grip

For this being a wrench it is heavy but that means it is strong. It's on there perfectly. If I didn't have the others I would definitely buy this set

Scritto da: Amazon Customer

Exactly what I was expecting

Great quality

Scritto da: RonG

Excellent wrench for the price!

This wrench worked really well. I used it for a clutch slave cylinder fitting in a vintage Ferrari. The particular fitting was the small male fitting that is affixed to a permanent tubing line in the car. To have rounded this fitting would have been disastrous. The wrench fit perfect with no "slop" where the inside wrench surfaces met the fitting. This is VERY IMPORTANT. The wrench has a nice quality look to it and is an excellent tool for the price.

Scritto da: Amazon Customer

Works well a little heavy

Wrench itself works great and sturdy. Almost too sturdy. It is real thick and that makes it a little heavy.

Scritto da: surfsup

Great product

Value for your money

Scritto da: Etienne Gallant

Excellent for working on air compressors plumbing

This wrench was a life-saver for removing the flare nut securing the pump discharge line into the main tank. (60 gallons vertical air compressor). Access was difficult and using an ordinary open wrench was not an option. It came really handy for re-assembly of the same line after work was completed. Quality and machining of the wrench was spotless. Unlike cheaper flare nut wrench, you feel that this one can translate your brute force directly to the nut without any rounding or flexing. These are on par with Sunex or Snap-On flare nut wrenches.

Scritto da: William K. Sherlock

GearWrench flare nut wrench

Excellent quality wrench. Prompt shipping. Useful for tightening/loosening nuts on fuel lines.

Scritto da: Amazon Customer

False Advartising

The picture shows that each head flexes. I paid extra wanting the flex head, and instead I am given a wrench that I could have paid $10 for. What a joke!

Scritto da: rotometer

Not a flex head wrench.

Not a flex head wrench. Wasted a week of my time waiting to replace my power steering rack.