InSinkErator Contemporary Instant Hot and Cold Water Dispenser Faucet, Satin Nickel, F-HC1100SN

Brand:InSinkErator

3.4/5

€
654.30

The InSinkErator Indulge Contemporary F-HC1100 Instant Hot and Cold Water Dispenser Faucet in Satin Nickel blends convenience with sophisticated style to coordinate with today’s finest kitchens. It's always ready to dispense near-boiling water and cool drinking water at your command. The Indulge Contemporary instant hot cold water dispenser faucet features a graceful, high-arching swivel spout and 2 unique integrated levers which provide a sleek, modern look. Its solid brass construction offers unrivaled quality for durability and corrosion resistance. The hot lever features an instant self-closing valve that automatically shuts off to ensure safe use while the Stay-On cool lever conveniently remains on. The InSinkErator Indulge Contemporary hot cold water dispenser is available in an array of designer finishes to perfectly complement your kitchen. It's ideal for instantly preparing gourmet coffee, hot tea, and flavored water, steaming vegetables in a flash, warming baby bottles in seconds, removing candle wax from candle holders, cleaning without the use of harsh chemicals, removing stubborn lids and labels, and so much more. The Indulge Contemporary instant hot and cold water dispenser is to be used in combination with the InSinkErator HWT-F1000S Hot Water Tank and Filtration System (sold separately) for filtered near-boiling and cold drinking water right when you need it. The faucet requires a standard 1-3/8-inch to 1-1/2-inch diameter hole for installation with a maximum counter thickness of 3 inches. Supply Pressure : 172-862 kPa (1.7-8.6 bar) (25-125 psi)

Amount

Add to Cart Buy now

EAN: 0050375007234

Categories Tools & Home Improvement, Kitchen & Bath Fixtures, Kitchen Fixtures, Water Dispensers & Coolers, Hot Water Dispensers,

Ideal for instantly making hot and cold beverages, steaming vegetables, cleaning dishes, warming baby bottles, and so much more. Instant hot cold water dispenser faucet has durable solid brass construction; hot lever automatically shuts off while the Stay-On cool lever remains on for easy use. Hot and cold water faucet only; for use with the re-engineered InSinkErator HWT-F1000S Hot Water Tank and Filtration System (sold separately). Sleek, contemporary instant hot and cool water faucet with swivel spout and integrated levers for convenience.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Satin Nickel
Country of Origin	‎USA
Customer Reviews	4.3 4.3 out of 5 stars 401 ratings 4.3 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Faucet
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎F-HC1100SN
Item Package Quantity	‎1
Item Weight	‎1 pounds
Manufacturer	‎InSinkErator
Material	‎Brass
Part Number	‎F-HC1100SN
Product Dimensions	‎5.2 x 5.5 x 8.7 inches
Size	‎360-Degree Swivel
Style	‎Hot and Cold
Warranty Description	‎Full 5 Year Parts and In-Home Service Warranty
Wattage	‎750.00

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: maria a gobo

Only game in town

I can’t live without my instant hot but the unit itself lasts about 2 years and the faucets maybe 3! :(

Scritto da: 50somethingMGR

IF IT LASTS BEYOND WARRANTY I COULD UPGRADE IT BUT THIS IS #3

BOUGHT THIS ON AMAZON TO REPLACE LAST ONE THAT FAILED, this is the thrid one, first one lasted about 6years second about 5, temporarily replaced with singles only 25 buks each as sind had a hole avail when we vented dishwasher to drain elbow , singles never quit,. had plumber looking for one that wasnt 300-500 bucks he tried all his supplier and the said they all hated it, its the most hated fitting they run into, even sweetheart deals they were close to 300 so he said get it here(amazon) 280 he didnt wnat to burn up all his favors. the plumbing suppliers hate to break the news to customers and there is a widespread disdain for the cost and failure rate of this dispenser, pros seen to universally discourage it now after seeing its failure rate and cost it seems. ISE now warranties part for 5years , could never find warranty or papers on original or 1st replacement. nice unit that people desire but parts not readily available for repairs. if you have an odd fisnish you will pay a princely sum for it. we went down to less exhorbitant nickle finish. Also, dont loose any odball Y fittings as they are not included in box, plumber said he would make it work with T as parts were avail and didnt require a visit to a plumbing supplier. (no they wont likely have this fitting at lowes or HD but a T will do if you dont have a y from old one. looks and function new id give it a 4, track record a 1, cost a 1, serviceacability a 1, design a 3 and consumer friendliness a 2 overall a 3. so if you dont want to pay aprox 300-500 +plumber or DIY time get 2 singles. BTW the 1st ISE hot tank lasted us 6 years second of another brand is on about 7 now, there may not be a 4th but will keep warranty paperwork close on this one. ISE at least is monitoring comments now, suggestion , make repair parts available and include y fittings with new units . if you dont, someone will knock off this design in china and you will likely regret it.

Scritto da: Colette Mather

Worked with seller to get a partial refund to cover a plumber to come fix the faucet

Worked well with the seller to find an amicable solution to the item arriving and not working well

Scritto da: Guitarzan

Warranty is Useless

Nice valve. Unit died after two years with an issue that seems to be common (hot water valve not working). After a long troubleshooting call with Insinkerator, they told me the valve was frozen, that it was a warranty covered repair. So I removed the valve and took it to the authorized service center where they told me that I needed to re-install the valve and have them come out to my house. If they come out and decide it is not a warranty issue, then I will have to pay for the service call which will cost nearly as much as a new valve. You would think that Insinkerator would just allow returning the unit for repair/replacement. Anyway, I decided to disassemble and clean the valve and then it worked fine. In short, it would not have been a warranty repair. Update: I gave a poor review because of the warranty but I love the dispenser. It is tall, swivels, and has a locking cold water valve. Upping to 4 stars

Scritto da: WA RandL

Replaced the same after 14 years of use.

I just replaced the same unit after 14 years of use. Handles started leaking 12-13 years in but we just wiped up after using it. Finally replaced the above sink faucet and re-attached it to the existing water heater and filter. Simple enough fix but $355 just for the faucet, ouch! Well if I get another 14 years out of this one, I suppose that is OK. As far as function, our water is pretty good in western WA but we drink the filtered water which comes out as clean as any RO system I've used. The hot water is where the value is. Instant tea, oatmeal, cleaning greasy utensils or pans... we use it several times throughout the day. All-in-all worth the money.

Scritto da: Elwood P Dowd

Sure wish InSinkErator cared more about their quality. Read the other reviews and see if you want to do the fixes needed

I've had a number of InSinkErator instant units and you can generally expect about two years (average, I've had them last as little as 11 months). They aren't terribly expensive and I haven't been able to find another manufacturer that is building any better product in a residential line. This is probably why InSinkErator isn't motivated to put out a better quality of product. This particular item LOOKS like very fine quality, but alas, as others here have commented, it doesn't work too good sooner or later. Sure nuf---right out of the box, mine wouldn't hold a complete stop of cold water (drip, drip, drip). And, NO, I don't have high water pressure. Thankfully a number of others here have provided good instruction on how to disassemble and reassemble this product to fix the problem(s). This was a very pricey faucet and unfortunately that price isn't a fair indication of quality. Has anybody found a comparable product that is better quality??? I can't find any.

Scritto da: Christopher

The faucet that exceeded my expectations

We had this faucet added to our kitchen remodel which finished about a month ago. I knew this was just the faucet when I purchased it. The tank is a separate item. The faucet works perfectly. Having the option for filtered cold water or filtered instant hot water has been an upgrade in our kitchen that I will now need to have in every place I live in going forward. It is without question the upgrade that gets used the most. The build quality is great. It's a solid faucet. We had a plumber come and install everything for us and he did a great job. I would recommend this faucet.

Scritto da: DADDIO

We love the unit

I have had this before and now have installed it in my new home. I was a little put off by the high price (about $450) especially so when I found belatedly that that did not include the boiler (another $400 or so). The plumbing and electrical work added about another $200 to the whole affair. We love the unit; but be advised that you are looking at around $1000 all up to have this appliance on your counter-top.

Scritto da: Amazon Customer

Works as advertised

Works great. East to install. Used this to replace an older model and replaced the heater tank at the same time. I purchased the digital insinkerator heater and they pair well. I have not had any dripping and I use it with an RO system. I installed a pressure tank to help keep this system properly pressurized. Very happy that I upgraded.

Scritto da: PamperZone

Incredible overnight service!

Exactly what I was looking for and shipped to me overnight which was completely unexpected! Awesome service and love my new tap!

Scritto da: DD

Three Stars

Water keeps dropping.

Scritto da: Cheryl Wozny

Very disappointed..

Ordered it, had it installed and it now leaks...continuously! Bought it as a replacement for the exact same one we have had for years. Tried everything as well as read the booklet on trouble shooting and nothing works. Buyer beware....it was brand new but said it had a slight smudge on the front of the faucet so I got it slightly cheaper. Very disappointed...It would cost us too much to send it back as we would have to have the plumber in again...SO what do I do?

Scritto da: MadMax

No one reads the orders !

Unbelievable! Paid more than 600 for Satin Nickel and got Chrome instead! My tap is leaking and cannot be used plus have to reschedule my technician that was supposed to install it tomorrow morning and had to pay cancellation fees!