IRWIN QUICK-GRIP Bar Clamps for Woodworking, One-Handed, Heavy-Duty, 12" (1964712) 12 Inch

Brand:IRWIN

3.7/5

€
71.68

With 600 lbs. of sustained clamping force, the IRWINQUICK-GRIPOne-Handed Bar Clamp, Heavy-Duty, is one of the top powerful one-handed bar clamps available. With an I-beam bar that reduces bending and flexing even under extreme pressure, it's ideal for heavy-duty applications such as installation, demolition, and rough glue-up. Dual swivel jaws feature non-marring full-face pads to provide even distribution of clamping force on the workpiece. The pads can be easily removed to activate the swivel jaws and maintain full contact even when conforming to irregular shapes. A Quick-Change() button converts this clamp easily into a spreader while the adjustable foot provides added support so the clamp can sit upright on a table or work surface, making it perfect for gluing panels or cabinetry. The unique pistol grip design and Quick-Release() trigger provide simple, one-handed operation. The IRWIN QUICK-GRIP One-Handed Bar Clamp delivers superior power, versatility, and stability.

Amount

Add to Cart Buy now

EAN: 7535001515503

Categories Tools & Home Improvement, Power & Hand Tools, Workholding, Hand Tools, Clamps, Bar Clamps,

I-beam bar design reduces bending and flexing even under extreme pressure. 600 lbs of sustained clamping pressure. Adjustable foot provides added support and enables clamp to sit upright on the work surface. New removable, swivel jaws and non-marring pads. New Quick-Change button easily converts clamp to spreader.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	IRWIN
Brand	‎IRWIN
Color	Blue
Color	‎Blue
Customer Reviews	4.7 4.7 out of 5 stars 1,638 ratings 4.7 out of 5 stars
Included Components	‎BAR CLAMP 12IN 30CM NEXT GEN HD
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	21 x 11 x 1.6 inches
Item Dimensions LxWxH	‎21 x 11 x 1.6 inches
Item model number	‎1964712
Item Package Quantity	‎1
Item Weight	0.1 Pounds
Item Weight	‎0.1 Pounds
Item Weight	‎1.6 ounces
Manufacturer	‎IRWIN
Material	Blend
Material	‎Blend
Measurement System	‎Metric
Number Of Pieces	‎1
Part Number	‎1964712
Product Dimensions	‎21 x 11 x 1.6 inches
Size	‎12 inch
Style	12 Inch
Style	‎12 Inch
Tensile Strength	600 Pounds
Tensile Strength	‎600 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Scheentz

Strong

After a few uses I would say it is a good quality clamp. It is very strong and operates smoothly along the bar. The one downside was converting it from a clamp to a spreader. The push button did not release the end to just slide off. I had to use a hammer to pop off the end. I assumed I might be breaking it in the process. Good news is, I didn't break it, and it now works as a spreader, but the transition from clamp to spreader is not easy or without worry. After several transitions it became a little easier, but still requires a hammer tap.

Scritto da: Hdweka

A beast of a clamp

I saw one of these converted to a hydraulic coupling tool and since the already converted tool is so expensive, I decided to make my own. Basically when hydraulic implements are attached and detached from skid loaders and other tool carriers, pressure can build as the temps change and when you go to re-attach, the couplings cannot be pressed together by hand. The solution was to open the fitting slightly letting pressure out. That makes a little mess and takes tools and time. This works great with its high 600 pound rating and presses the fitting together without a fuss.

Scritto da: T. Scott Gruzebeck

Built well, sturdy.

I have several sizes, project came up needed this size.

Scritto da: LizzyP

Stretch it

This stretcher worked perfectly. Made the job of replacing sling seat much easier.

Scritto da: Victor

Tough clamp for any job!

These clamps are easy to use, very well constructed, have a great amount of holding power, and are easy to use even with one hand. I have several of these clamps in different sizes. I plan on buying more for bigger projects.

Scritto da: Ryoizard

A very, very, very sturdy and decent designed product

My application is a little bit creative... I use it to clip my Ducati's 190mm tire so I can uh... break the bead and install a new valve stem. It actually worked. I'm pleasantly surprised that it has the force powerful enough to clip and break the bead for a considerably wide Michelin tire. Anyway, Irwin makes good product, doesn't matter where it is made, I'm ok for expensive item as long as it worked.

Scritto da: Penelson

Clamps down!

This set of clamps is larger than my prior sets. Hope that will provide better grip. I have found Irwin clamps much better than the cheaper knockoffs. This set is bigger and weighs slightly more than my older sets. The extra weight and larger size makes them slightly harder to use. I tend to use my older ones first. Can you ever have enough clamps?

Scritto da: Nick

Awesome

I use them quite often and they're pretty sturdy. A little bowing on larger clamps, but good hold overall.

Scritto da: ricky wangham

Regid clamp n easy setting

Excellent product

Scritto da: Hedonic_Treadmill

IRWIN heavy duty.....!!! 24" clamp.

As expected , great clamps from Irwin , which by the way are massive . See in pic the difference in size compared to the medium duty clamp. 'One can never have enough clamps' is the saying ... So getting to the point slowly when I have a wall full of clamps and I could say that to somebody....

Scritto da: Mark Smith

great quality

great for wood work

Scritto da: JPL

Shoddy construction

The tip just won't reverse. It comes off just fine so you can reattach it in the reversed position, on the opposite side, but no matter how you put it back in, it won't lock in place. Very disappointing. On top of that, to return it, I have to go a few kilometers out of my way to bring it to Purolator's dropbox location. Not great either. Kind of a hassle, if you ask me. I cannot recommend this product.

Scritto da: Kdream

Buenas prensas pero no era lo que esperaba

Compre estas prensas por que ya conozco la calidad de Irwin, pero cuando la compre la foto mostraba o engañaba que parte de la manija o cuerpo eran de metal, lo que me daba un buen estimulo saber que el producto si tendría más presión de agarre por ser más robustas, pero la sorpresa fue que al abrir el producto, lo único de metal era el riel sobre el que corren las pinzas, anexo foto para que vean que es lo que compran, en general no las regrese porque las conseguí a muy buen precio, pero con el precio actual de más de mil pesos me la pensaría dos veces. Producto fabricado en China según las especificaciones de Irwin.