Jonard Tools EPD-91461, Manual Punchdown Tool with 2 Steel Blades 66 and 110 for Punchdown Blocks Tool + 2 Blades 66 & 110

Name: Jonard Tools EPD-91461, Manual Punchdown Tool with 2 Steel Blades 66 and 110 for Punchdown Blocks Tool + 2 Blades 66 & 110
Brand: JONARD TOOLS
SKU: 0811490014947
Price: 84.32 EUR
Availability: InStock

Brand:JONARD TOOLS

3.6/5

€
84.32

The Jonard Tools EPD-91461 Punchdown Tool with 2 Blades 66 & 110 is designed to terminate and trim wires in 66 and 110-style cross connect blocks and 110-style wall jack modules. This punchdown tool is perfect for any telecom or data communications installer. The tool cleanly terminates and trims wires in 66 and 110-style cross connect blocks and 110-style wall jack modules and also features high/low impact settings, combination hook/spudger stored in the chassis, color coded yellow and blue for ease of use, enlarged blade storage compartment for easy storage, tested up to 100, 000 cycles at high impact setting to ensure long life during use, compatible with all of our EPB-series blades and other similar brands. This product has a lifetime .

Amount

Add to Cart Buy now

EAN: 0811490014947

Categories Tools & Home Improvement, Electrical, Tools & Hardware, Cable Insertion & Extraction Tools, Punchdown Tools,

VERSATILE USE: Adjustable high/low impact settings and compatible with all of our EPB-series blades and other similar brands (sold separately). HIGH DURABILITY: Tested up to 100, 000 cycles at high impact setting and blades are made of hardened alloy steel and nickel plated to ensure long life during use. COLOR CODED: Color coded body is half yellow (cut side) and half blue for ease of use. CONVENIENT DESIGN: Sleek and ergonomic design with combination hook/spudger stored in the chassis and enlarged blade storage compartment for easy storage. WHAT’S IN IT: Punchdown Tool, 66 Blade, 110 Blade.

Item model number	EPD-91461
Manufacturer	Jonard
Product Dimensions	1.5 x 3.5 x 10.25 inches; 6.35 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: P.M.

This tool replaces a 20-year-old tool that got dropped and is just as good

I have had a punch down tool for the last 20 years. It is not one that I use all the time but when I need it it is there. Over the years of plastic deteriorated and when I dropped it this time when using it it cracked and broke and it was time for a new one. I looked at the different reviews and this tool looked very similar to what I had already and had the same features. I purchased this and used it to finish the job I was on it works very well the existing cutters that I had for my old tool will fit in the new one that's a plus. So if you need one of these this is a really good tool and should be top of your list.

Scritto da: Jim B

Good enough

The knife on this tool has a hard time cutting all the way through the wire and does get stuck in tighter knives. It's fine for smaller jobs, but I would not want to punch down several dozen ends in a day.

Scritto da: Carlene S. Metteer

Worthy Buy

I work as a low voltage electrician and bought this as a back up punch. The quality is every but as good as my Fluke punch for the half the price.

Scritto da: J. Bollinger

A quality classic -- never goes out of style.

This is the classic punch down tool by Jonard. You cant go wrong with this purchase. They will last for years unlike the Klein tool I just returned.

Scritto da: B. K. Speck

Good Punchdown Tool

Bought this to replace my twenty year old Paladin Tools Punchdown that broke. So far, so good!

Scritto da: bodezutpha

Great tool for 1/3 of the price of a Fluke

Had it for about a month and pleased with it so far. I work in the telecom industry and use punch tools daily. Construction and quality is good and comparable to a Fluke brand at three times the price. My only complaint is that I wanted to continue using my old Fluke 110 blade with the Jonard tool but it wouldn't fit when I tried to insert it by hand. My Fluke 66 blade did insert in the tool with no problem. The 110 blade would probably go in if I forced it but I'll just use the Jonard 66/110 blade that came with the tool.

Scritto da: SkydivingNerd

Hard To Use On 66 Blocks

I'd have to agree with Drake's review. The 66 blade isn't sized correctly and it's hard to get over the 66 contacts. And once you've punched down the wire, it's difficult to pull the blade off. Luckily I just need it for a few punches here and there but this will really slow down anyone who has even a moderate amount of punching to do. A better quality Fluke blade might work on this tool but if you're going to spend the money for a Fluke blade you might as well get the Fluke tool too.

Scritto da: Whod101

Good product

Good product ????

Scritto da: Darryl H

Used this to install some RJ-45 into a small patch ...

Used this to install some RJ-45 into a small patch panel at home. Works as advertised. Pros: - Inexpensive - Seems rugged - Does what's on the tin - Hooks on the side come in handy for removal of old wires and mistakes Cons: - Blade release dial on the bottom is really tight - There is a space in the back for a backup bit, but no backup bit is sold with the unit.

Scritto da: Stephane Lainesse

aime pas

fonctionne pas comme les autre punch que j ai utilisé

Scritto da: Gagan

Good Product So Far, Used for a Month Now

It’s a Good Product and so far working well. Blades are Good.

Scritto da: Jose Angel

Buenas herramienta

LLego en su empaque correctamente , veremos que tal su desempeño en los siguientes dias , pero por las primeras pruebas esta funcionando bien

Scritto da: Greg

Excellent.

Way better than the little plastic ones. Now I work like a pro.