0
0

Total:€ 0.00

See cartCheckout
LoginRegister
0

Total:€ 0.00

See cartCheckout
LoginRegister

K&N Cold Air Intake Kit: Increase Acceleration & Towing Power, Guaranteed to Increase Horsepower up to 9HP: Compatible with 5.7L, V8, 2012-2019 Toyota Tundra, 63-9036 Roto Molded

Brand:K&N

3.6/5

€
659.23

MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support. EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools. PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle. DURABLE ROTO-MOLDED INTAKE TUBE & CUSTOM HEAT SHIELD: A high-density polyethylene (HDPE) rotationally-molded intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay. FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions. BETTER TOWING: Air intake kit improves acceleration and uphill performance when towing by improving throttle response and overall horsepower and torque. DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system. HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed. GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 9HP and up to 13.57 ft.lbs. of Torque.

Amount
Add to CartBuy now

EAN: 0024844314086

Categories Automotive, Performance Parts & Accessories, Filters, Air Intake,

MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support. EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools. PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle. DURABLE ROTO-MOLDED INTAKE TUBE & CUSTOM HEAT SHIELD: A high-density polyethylene (HDPE) rotationally-molded intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay. FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions. BETTER TOWING: Air intake kit improves acceleration and uphill performance when towing by improving throttle response and overall horsepower and torque. DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system. HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed. GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 9HP and up to 13.57 ft.lbs. of Torque.
Brand K&N
Fit Type Vehicle Specific Fit
Item Dimensions LxWxH 18.25 x 18.25 x 12.5 inches
OEM Part Number 63-9036
Product Grade Replacement Part

3.6

13 Review
5 Star
78
4 Star
12
3 Star
4
2 Star
1
1 Star
4

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Anthony Almeida
Worth every penny!!
K&N never disappoints! This is an aftermarket product that I highly recommend. Hearing that V8 growl is so satisfying! It also states that it only fits years 2012-2019 but it fits perfectly in my 2020 Tundra.
Scritto da: Lars Stoner
Can’t go wrong with k&n
Wakes up my tundra along with my throttle body spacer like crazy. Have their filters on all my vehicles and my four wheeler and the amount of power improvement you get out of a intake filter and plumbing is crazy. Definitely get this for your truck
Scritto da: brian e wanzor
Nice
Works great, engine sounds mean. Better mileage already!
Scritto da: prevent ت
Want a DIY TRD CAI at half the price?
I feel like this is a product that works best when combined with other mods. Assuming you want more exhaust tone, let's assume you have a catback of some sort. Most of us go with the TRD. But maybe you want more sound (both from the exhaust in the back and from the engine up front) and the TRD CAI costs too much at $400? In that case I think this is a perfect medium. If you look at the TRD CAI, it basically consists of straight tube from the stock airbox to your throttle body, an air filter, a less restrictive scoop in the fender well, and a pretty red TRD top for the airbox. The rest... is identical to your existing CAI in your truck. A tall price to pay, huh? While I will admit that since the upper red part of the TRD CAI is slightly taller than the stock one, it may (in theory) supply more air at a moment's notice... but odds are those types of gains are only noticable on a dyno and will be in the single digit numbers at a very specific RPM at best. So why get this product? Okay, you got the TRD Cat back but you want just a little more. I recommend pairing this product with TRD Part #: PTR0334079, the "TRD Flow Accelerator" which basically opens up a wider opening in your fender to allow more air into the airbox. If you purchase this K&N product without that part, the K&N can only do as much work as it can with the air that it is given. So give it more air! You're buying this because you want better sound, and that extra $15 I believe is how you get it. You can purchase it as a replacement part for less than $15 and have 1/3 of the $400 TRD CAI. As for the air filter... yes, this K&N kit does come with an air filter that allows for higher airflow than stock but if you put it on a dyno... again, you won't notice a significant difference. But from the reading I've done, the K&N air filters achieve higher flow in part due to allowing more junk to pass through their filter. So if you really wanna do a TRD CAI on the cheap, throw a TRD filter in your airbox along with this K&N tube. You'll get that sound to compliment your exhaust... but at a fraction of the price of the TRD version, while maintaining a high level of filtration. Don't worry, you can still paint the stock airbox lid red if you wish. Pros: - TRD CAI at a fraction of the price - Uses stock airbox, just like the $400 TRD model Cons: - K&N filter doesn't filter as much as the OEM Toyota filter or the TRD Filter... but that's a cheap fix. Just use this with a TRD filter. - Would it kill K&N to give us a red coupling to connect to the airbox with? It would totally help justify the pricetag, while minimizing costs on their end. The TRD one is red and pretty, this one is black and black. Both achieve the same result... but the $400 TRD one is red. K&N could totally steal sales from TRD by making parts of this kit pretty too. Do any of us feel good after spending $200+ on a plastic tube? At least pretty it up pls. Other: - Works best with AT LEAST the TRD Flow Accelerator, which is just $15. For max effect pair it with a proper catback exhaust. On stock Tundra, don't expect much. You're replacing cheap parts with cheap parts. You get what you pay for. But combine this with a decent exhaust... you just saved $200 versus the TRD model and achieved virtually the same result.
Scritto da: Gerry
As advertised
Once installed this works very well and I'm happy with it. The new growling sound it makes is crazy. I put one of these on my Civic SI earlier this year and was impressed with it then. In town I definitely no improvement in gas mileage but on the highway it seems to improve by more than 2 Mpg as I drive the same stretch of highway a lot.
Scritto da: Jason Davis
No Sound Improvement
2016 Tundra 5.7 along with the TRD air accelerator. Unknown on mileage yet. No sound on Induction which is disappointing
Scritto da: Timothy C.
Makes my truck sound mean!
I decided to go and buy this intake, I knew upfront that the intake wouldn't really increase performance, most don't. Sure it reduces air flow restrictions but doesn't compress the air. It arrives in two days with prime, I go to install it, assembly of the heat shield and mounting points takes about 15 minutes longer than it should have. As a suggestion to K&N, please for the love of God, pre-organise the hardware into marked baggies or cardboard packs. Now on to installing the heat shield, the instructions have you mount the shield into the lower factory holes but say nothing of the side mounting bracket needing to share a hole on the inside of the fender which was nearly f'n impossible to get to, no mention in the instructions because unless you remove the plastic trim and panel between the hood and the wipers you DO NOT HAVE ENOUGH ROOM!!! Squeezing your head and a hand between the hood lift piston and the hood is not fun. So ease of install was poor just because of this one mounting point. That said, it makes my truck rumble with light throttle and absolutely ROAR under heavy throttle!! That alone was worth the price of the intake and the aggravation of the install! No check engine lights, no running oddly, just pure ROAR! Increased fuel economy isn't expected when you have your foot on the floor all the time so I can't speak for that yet!
Scritto da: Jer
Vvroom
Strange there no instructions included but easily found online. Love the new sound. Makes the exhaust sound deeper too.
Scritto da: MARK L
Makes a noticeable change
Some of the instructions were off regarding the mounting points, so we just winged it and nailed it. Gas pedal definitely feels lighter and fuel economy change is more and more noticeable. Not sure about the sound everyone claims to hear but otherwise this does the trick.
Scritto da: Amazon Customer
Great item to get.
Easy installations and love the performance and the sound of it. You’ll notice the difference when it comes to sounding.
Scritto da: Denis Barré
KN
Installation et esplication précise gîte parfaitement sur mon tundra 2017
Scritto da: Lyle Husak
Easy instructions
Excellent and understandable instructions with pictures
Scritto da: ruffbmw
Bad ass. You need this now
Bad ass. You need this

Related products

hot
K&N Cold Air Intake Kit: Increase Acceleration & Towing Power, Guaranteed to Increase Horsepower up to 9HP: Compatible with 5.7L, V8, 2012-2019 Toyota Tundra, 63-9036 Roto Molded
3.6/5

€ 659.23

K&N Cold Air Intake Kit: Increase Acceleration & Towing Power, Guaranteed to Increase Horsepower up to 9HP: Compatible with 5.7L, V8, 2012-2019 Toyota Tundra, 63-9036 Roto Molded
3.6/5

€ 659.23

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array

Total:€ 0.00

See cartCheckout

Categories

All the categories
Menu Categories Near Cart

Menu