Leonardo Bike Rack Wall Mount with Tire Tray by Delta Cycle – Elegant Vertical Hanger Hook Design Provides Easy Bicycle Storage Access – Hassle-Free Installation – Vertical Mount Holds Up to 40 lbs 1 Bike Hook With Tray

Brand:‎Delta Cycle & Home

3.5/5

45.90

PRODUCT DESCRIPTION Many home owners and apartment renters find bike storage to be a big problem. Bikes are often getting in the way, and are left lying on the floor, or leaning against the wall. Delta Cycle's innovative and unique bike storage systems are the perfect solution to creating an organized space for your bikes, as well as the answer to freeing up space in any room. Get your bikes out of the way, off the floor, and looking neat with Delta Cycle's Leonardo Da Vinci Single bike rack. The Leonardo Da Vinci holds the front wheel with a rubber coated arm. It conveniently accommodates any wheel size from touring to phat, chunky mountain tires can hold a maximum load of 40 pounds, and comes with a clear plastic matte tire tray that will save your wall from tire marks. The Leonardo Da Vinci should be mounted to a wall stud, comes with installation hardware, printed instructions, and a lifetime guarantee against defects. About Delta Cycle: For more than 30 years, Delta Cycle has created useful cycling products with a mission to make an innovative difference. The company works hard to make their products better and deliver superior value. Delta Cycle offers only a small, concentrated product line that represents the best there is in each category. AMAZON.COM Store your bike easily and with a bit of panache with the stylish, curvy Delta Leonardo wall-mounted single bike rack. Elegantly designed with a silver finish, it's perfect for storing a bike in space-limited apartments or in the back hall. The Leonardo holds the front wheel with a rubber coated arm. It conveniently accommodates any wheel size--from touring to phat, chunky mountain tires--and can hold a maximum load of 40 pounds. It should be mounted to a wall stud. It comes with installation hardware, printed instructions, and a lifetime guarantee against defects. About Delta Cycle For more than 20 years, Delta Cycle has created useful cycling products with a mission to make an innovative difference. The company works hard to make their products better and deliver superior value. Delta Cycle offers only a small, concentrated product line that represents the best there is in each category. FROM THE MANUFACTURER Many home owners and apartment renters find bike storage to be a big problem. Bikes are often getting in the way, and are left lying on the floor, or leaning against the wall. Delta Cycle's innovative and unique bike storage systems are the perfect solution to creating an organized space for your bikes, as well as the answer to freeing up space in any room. Get your bikes out of the way, off the floor, and looking neat with Delta Cycle's Leonardo Da Vinci Single bike rack. The Leonardo Da Vinci holds the front wheel with a rubber coated arm. It conveniently accommodates any wheel size--from touring to phat, chunky mountain tires--can hold a maximum load of 40 pounds, and comes with a clear plastic matte tire tray that will save your wall from tire marks. The Leonardo Da Vinci should be mounted to a wall stud, comes with installation hardware, printed instructions, and a lifetime guarantee against defects. About Delta Cycle: For more than 30 years, Delta Cycle has created useful cycling products with a mission to make an innovative difference. The company works hard to make their products better and deliver superior value. Delta Cycle offers only a small, concentrated product line that represents the best there is in each category. See more

The Brand You Trust. The Accessories You Need: For more than 30 years, Delta has been the brand you can trust with US-based design and engineering. Our small, concentrated product line reflects the careful thought and dedication invested into each and every product we create. Easy Installation: Assemble in minutes with included hardware. The Leonardo quickly mounts to any wall joint or stud, and the easy peel-and-stick installation of the tire rack tray allows custom placement while keeping your wall scratch-free and protecting your tire rim and finish. Looks Good in Any Room: The bike mount’s contemporary and elegant product design with premium powdercoated finish complements any apartment, office, or garage space. The hanger features a non-slip rubber-coated hook to protect your tire rim. Universal Fit: Built to accommodate any bike size or type, this bike hanger supports a single bike up to 40 lbs with tires measuring under 2.5”. Space-Saving Bike Wall Mount: Free up your floor space and protect your bicycle with Delta Cycle’s Leonardo Bike Wall Mount Rack. This rack saves space by storing your bikes vertically against the wall and features a clever hook-shaped design for easy access and bike removal. Ideal for your apartment, home, or garage.
Assembly Required ‎Yes
Batteries Included? ‎No
Batteries Required? ‎No
Brand ‎Delta Cycle & Home
Color 1 Bike Hook with Tray
Color ‎1 Bike Hook with Tray
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 3,157 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎Powder Coated
Finish Type ‎Powder Coated
Included Components ‎Delta Cycle Bicycle Storage Hook
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎RS4007
Item Package Quantity ‎1
Item Weight ‎1.76 ounces
Manufacturer ‎Delta Cycle & Home
Material Alloy Steel
Material ‎Alloy Steel
Mounting Type ‎Wall Mount
Number of Shelves ‎1
Part Number ‎RS4007C
Product Dimensions 0.04"D x 11"W x 0.08"H
Product Dimensions ‎0.04 x 0.06 x 0.08 inches
Product Dimensions ‎0.04"D x 11"W x 0.08"H
Room Type ‎Office
Shelf Type Floating Shelf
Shelf Type ‎Floating Shelf
Size ‎Original with Tray
Special Feature Anti-Slip
Special Feature ‎Anti-Slip
Special Features ‎Anti-Slip
Style ‎1 Bike Hook With Tray
Warranty Description ‎Limited Lifetime Delta Cycle

3.5

5 Review
5 Star
71
4 Star
16
3 Star
7
2 Star
3
1 Star
3

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Ashish koirala
Great
Mounted this to a concrete wall using tapcon screws. Holding up really well. Saving space, in my cramped up garage.
Scritto da: Jimi Oke
Great Piece of Work
This hook (or rack) and accompanying tray are fantastic, instantly transforming my space after installing and hanging up my road bike. A few pointers: 1) You do not necessarily need a stud to install the rack. You can hang it on drywall with the right hardware. I used the Toggler brand "Snaptoggle" toggle bolts, able to support about 300lbs in 1/2 in. drywall. These toggle bolts required a half-inch hole to install. This made it tricky to determine the exact distance between the two screws. I ended up drilling three holes before I got it right. 2) The mounting instructions on the packaging say (2b) "mark the spot where the front tire touches the wall," and (2c) "measure 12" above that spot to mark the top screw hole of rack." I found the 12" to be off. 6" is more like it. Having to drill an extra hole below the second turned out to be a blessing, because the top hole was way too high, following the 12" direction. 3) Note that the tip of the hook is roughly 4" above the top screw. I have a 700x23c wheel, and the top of the wheel is 5" above the hook when the bike is hung. Thus, my bike ends up about 9" above the top screw. 4) It's extremely helpful to hold the bike up against the wall, as the manufacturer suggests, and take appropriate measurements before drilling any holes. I did this all by myself, but if you can get an extra hand, that may save you a lot of time and effort. 5) Something I consider to be a design flaw on this otherwise beautiful and functional rack: the screws are not flush with the rack. In my setup, the lower screw juts into the wheel right close to where it rests on the rack. Not sure if my tire will lose pressure faster because of this (probably not), but I wish the screws were flush with the entire rack surface. I would post a picture if I had a camera, but I have to say for 15 bucks, this is an excellent apartment solution for my road bike (one-bedroom in my case), and it holds it in a spot that seems to have been made just for this.
Scritto da: Kalmairn
Good mount, just be aware of the limitations
I bought 4 of these to hang an assortment of bikes on the wall of my bike room. They make the room look very cool, with the bikes along one wall and my rack and tool chest on the other side - like a mini bike shop, which it pretty much is. Installation I initially used 60lb drywall mounting hardware for these, however the first bike (an 18lb road bike) pulled the hoot out of the wall. Instead, I put 3/4" finish-grade plywood on the wall over the drywall to save the hassle of mounting on drywall. I placed the hooks 30" apart to make sure I had room for wide handlebars and space to "lean" each bike to pull it out of the hook. I can't give this product 5 stars, both for product and installation reasons. I'd still recommend them, but go in with eyes wide open to the limitations and what's needed to use them effectively. Product Problems: 1) The screws are not counter-sunk into the mount. This makes it hard to get bikes with thinner tires to hang with the wheel straight. 2) The back wheel plate doesn't include screws, only adhesive tape, and has no adjustment capability. There may be no weight on the plate, but not all bikes are equal length. It'd be nice if it were either slotted or otherwise adjustable. Non-Product Problems (Or Buyer Beware) 1) This won't fit most mountain bike tire/wheel setups. If you have a ~2.0 tire or wider, it won't clear the hook. My WTB Wolverines won't clear. 2) Aero road wheels over about 45mm won't fit without putting the bike at a significant angle to the hook. If you're putting multiple hooks in a row, make sure you have room or put the aero wheel bike at the right-hand end. 3) IMPORTANT. The weight of the bike is levered against the hook. If you're mounting to drywall, be absolutely certain to use high-capacity mounting hardware - at least 100lbs, preferably 200lbs. An 18lb road bike will pull a 60lb drywall mount out of the wall.
Scritto da: CraigW
Price DOUBLED
I bought these a year ago for $10. Now they are $19. Good product, but you might want to shop around (I try to not reward price gouging).
Scritto da: eRRaTiC
This works for ALL your bike needs!
I bought this to hang my mountain bike on the wall outside on my patio to give me some more room. I was worried based on some feedback here, that it wouldn't accommodate my mountain bike. Well, I can say now that I bought it, it works for my mountain bike, my sons bike (20" bmx) and even accommodates my wife's beach cruiser tires! I will now be buying more so that I can set theirs up next to mine. I have 26 x 2.00 size tires on my mountain bike. It easily fits the tire. I have to lift the bike up just a bit higher than the hook so I can get the tire in there, then it holds it securely. When I was installing it, I put my bike up against the wall area I wanted it installed to make sure all would work OK. It took me just a few minutes to get it all situated. The actual holder has a plastic cover over the tire holder part to prevent scratches. Though it seems durable, it will probably be the first to fail over time. It came with 2 screws and 2 dry wall anchors. I didn't have to use the anchors as the screws were sufficient enough since it was being installed on wood. Now we can talk about the Tire Tray. It looks like it was a last minute idea. It doesn't match the top piece and comes only with a strip of double sided tape on the back to install it with. That didn't work for me. The good news is that it has two pre-molded holes already prepared as if it should have been drilled but wasn't. This made it easy for me to drill two holes and use my own screws to install it with. One thing to think about with this piece, is it isn't needed unless you worry about tire marks on the wall. It doesn't support the bike in anyway, so you can choose if you want to use it or not. Overall, good value, and is easy to install. It comes with the screws needed for the main piece and the other piece can easily be installed using other methods. I definitely recommend this for people who need a quick fix for storage of their bike and an easy installation.

Related products

hot
Topeak Swing-Up DX Bike Holder, Black
3.6/5

€ 128.08

Topeak Swing-Up DX Bike Holder, Black
3.6/5

€ 128.08

hot
Swagman PARK City 6-Bike Rack Stand
3.4/5

€ 244.28

Swagman PARK City 6-Bike Rack Stand
3.4/5

€ 244.28

hot

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array