0
0

Total:€ 0.00

See cartCheckout
LoginRegister
0

Total:€ 0.00

See cartCheckout
LoginRegister

LMT Onsrud 57-280 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter

Brand:LMT Onsrud

4.1/5

€
57.55

Designed for routing where downward chip removal, tool rigidity, long life, and high quality finish is desired. Use for natural wood and wood composites.

No units available

EAN: 0895680010568

Categories Industrial & Scientific, Power & Hand Tools, Power Tool Parts & Accessories, Router Parts & Accessories, Router Bits, Straight, Spiral & Trim Bits, Spiral,

Double flute, 30 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Country of Origin USA
Cutting Diameter 0.25 Inches
Cutting Length 0.88 Inches
Domestic Shipping Item can be shipped within U.S.
Finish Type Uncoated
Finish Type Uncoated (Bright)
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number 57-280
Manufacturer LMT Onsrud
Material Carbide
Number of Flutes 2
Product Dimensions 4 x 0.5 x 0.5 inches; 1.6 Ounces

4.1

3 Review
5 Star
100
4 Star
0
3 Star
0
2 Star
0
1 Star
0

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Victor Di Paglia
Nice Clean Razor Sharp Cuts, And A Good Value
My how using the correct bit for the application is so life changing. I hate to sound so dramatic, but learning to use a CNC router, to really learn to use it to all it's benefits takes a very long time, especially when you are doing it yourself (and with help online sometimes). For many years, I never really thought much of changing my end mill to a down-cut type of bit. Then Christmas came and I had a sign to do for a customer and had used pine as the substrate. As any of you know, pine is rather stringy and can present problems when milling intricate cuts. I looked at my test piece and thought that I would be spending a long time making it look good. I was cutting pockets for letters to fit into and the surface had to look good. Then suddenly I thought about the down-cut bit and decided to order one. I guess it's not my fault I hadn't used them before as most stuff I was don't really didn't need it, but this did. I got the new bit, and ran the test again. Night and day! The upper part of the pine, the surface that would be displayed was sharp and clean and I was as happy as a clam, (you got me too. I really don't know why a clam would be happy but I couldn't think of anything else). Anyway, chalk this up to experience and I hope this might help someone else with the same issue.
Scritto da: AlaskaThomas
Works great for milling wood blocks for my high school manufacturing ...
Works great for milling wood blocks for my high school manufacturing class. The down cut makes a lot more dust but gives a very clean finished product with little to no need for finish sanding.
Scritto da: Gary D. Demos
sharp cutter
The bit was good and sharp - cuts well. Downward spiral avoids fuzzing and tearing of wood. Would be nice if it had a clear tube cover but it didn't.

Related products

hot
FT9125 - Fine Cut Tool - 3/4x2x3/4x4-2 Flute Downcut Fiahtail Wood Router
0.1/5

€ 154.56

FT9125 - Fine Cut Tool - 3/4x2x3/4x4-2 Flute Downcut Fiahtail Wood Router
0.1/5

€ 154.56

hot
BOSCH 85908MC 1/8 In. x 1/2 In. Solid Carbide Double-Flute Upcut Spiral Router Bit
4.1/5

€ 62.25

BOSCH 85908MC 1/8 In. x 1/2 In. Solid Carbide Double-Flute Upcut Spiral Router Bit
4.1/5

€ 62.25

hot
Drill America DWDSS4 HSS Slow Spiral Drill Bit, 4 Size (Pack of 12)
0.1/5

€ 65.98

Drill America DWDSS4 HSS Slow Spiral Drill Bit, 4 Size (Pack of 12)
0.1/5

€ 65.98

hot
LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter 1/4 in
4.1/5

€ 91.35

LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter 1/4 in
4.1/5

€ 91.35

hot
Freud 73-214: 1/2" (Dia.) O-Flute Up Spiral Bit with 1/2" Shank 1/2-Inch Diameter by 1-1/8-Inch Height O Flute Up Spiral Plastic Cutting Router Bit with 1/2-Inch Shank
3.7/5

€ 112.47

Freud 73-214: 1/2" (Dia.) O-Flute Up Spiral Bit with 1/2" Shank 1/2-Inch Diameter by 1-1/8-Inch Height O Flute Up Spiral Plastic Cutting Router Bit with 1/2-Inch Shank
3.7/5

€ 112.47

hot
LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter
4/5

€ 71.75

LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter
4/5

€ 71.75

hot
LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter 1/8 in
4.1/5

€ 59.33

LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter 1/8 in
4.1/5

€ 59.33

hot
LMT Onsrud 63-624 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter
4.1/5

€ 96.48

LMT Onsrud 63-624 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter
4.1/5

€ 96.48

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array

Total:€ 0.00

See cartCheckout

Categories

All the categories
Menu Categories Near Cart

Menu