Monarch Rain Chains 20042 Aluminum Black Powder Coated Gutter Adapter Rain Chain Installation, Standard

Brand:Monarch Rain Chains

3.7/5

41.32

Monarch's Aluminum Black Powder Coated Gutter Adapter for Rain Chain Installation Kit, Standard size improves water flow, reduces splashing, and compliments your rain chain. Fits most gutters and comes with an additional copper plate to fit larger gutters. Easy installation that requires no tools.

No units available

EAN: 0633402200428

Categories Patio, Lawn & Garden, Outdoor Décor, Rain Chains,

OVERALL ITEM DIMENSIONS: The rain chain gutter reducer measures 5” (L) x 3.5” (W) x (3)” H. Top opening 2 inches, bottom opening 1.75 inches; Be sure to clean your gutters before installing the rain chain gutter adapter kit to your outdoor rain chain. EASY INSTALLATION: The gutter installer easily attaches directly to the top of the rain gutter chains. The brass bolt on the rain chain gutter adapter small has a center groove to hang and secure the rain chains for gutters. INCREASE CURB APPEAL: A rain chain installer, in combination with rain chain downspouts for gutters, offers unique curb appeal which will enhance the look of your home. Complete the look by adding one of our anchoring basins or anchoring stakes. PREMIUM QUALITY CONSTRUCTION: The rain chain gutter installer is made of aluminum with a brass bolt to hang your rain chain. The rainchain kit provides a secure seamless way to hang your rain chains from the gutter. FUNCTIONAL DESIGN: The rain chain adapter is designed to fit in the rain gutter over the drain hole where there’s a downspout. The rain chain holder captures rainwater and tapers down to direct the water from the gutter into the rain chain downspouts.
Country of Origin India
Customer Reviews 4.6 4.6 out of 5 stars 1,067 ratings 4.6 out of 5 stars
Item model number 20042
Item Weight 4.6 ounces
Manufacturer Monarch Rain Chains
Product Dimensions 5 x 3.5 x 3 inches

3.7

13 Review
5 Star
78
4 Star
14
3 Star
5
2 Star
2
1 Star
2

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Juana
Useful
These adapters for use with rain chains were easy to install and use immediately. I had three installed, with the rain chains in about an hour. Waiting for rain so we can watch them in action.
Scritto da: Cary Alburn
A pain to install, but once installed, worked perfectly.
The media could not be loaded. This adapter might work well in a pre-existing downspout hole, but cutting a hole where there wasn’t one was a pain. It would have been helpful if the instructions stated what size hole saw might be appropriate, but it didn’t. I think a 2 1/4” would work, but I only had a 2” and 2 1/2” in my tool box, so I used the larger one—hole saws are expensive. And cutting into a thin aluminum gutter is difficult. The reinforcement plate provided is slightly too wide for a standard 5” K gutter—so I cut off about 1/4” with tin snips so that it would lay flat in the bottom of the gutter. That’s something that the manufacturer should change, to make it easier to install in a 5” gutter—it would still have to be shaved for a 4”, but very few gutter installers install 6” gutters. I then sealed both the adapter and the reinforcement plate with gutter sealant, gluing them in place. My timing was perfect, because the gutter sealant instructions said to wait 24 hours—a driving rain happened 26 hours later. End results: great!
Scritto da: Goldens
Was exactly what we needed
Great fit for our rain chain
Scritto da: Meche
Larger adapter plate very helpful!
This Monarch rain chain install kit was just what I needed for my older gutters. The adapter piece on its own was not big enough to cover the shape and size of my gutter outlet so I put the larger plate through the top hat and glued them together with roof cement then dropped it through the gutter outlet and sealed in place. Kudos to the Monarch manufacturer for furnishing different size plates. I also like that the material is powder coated aluminum because the copper type would cause a corrosive reaction. Photos attached
Scritto da: Amazon Customer
Seems sturdy
I think some water leaks around from the sides but I guess it doesn't make a difference. It seems sturdy enough and u hooked a rain chain that was kinda heavy. Worked well for me.
Scritto da: Robert D.
Necessary to attach chain to gutter.
There were no instructions. Basically you will need a 2" hole saw to punch a hole in the bottom of the gutter. The adapter will just fit through thru. There is no way to attach or seal it to the bottom of the gutter. I used some silicone caulk to seal it and then drilled holes at each end of the adapter and screwed it to the gutter. The installation took 10 minutes - that is after I located a 2" hole saw, caulk and screws.
Scritto da: R S Cobblestone
Works great!
Works great with a Monarch Rain Chain link in my downspout!
Scritto da: JMLMT
Perfect and easy to install
This was so easy to install; drop it into place, and you're done after attaching the rain chain. It took me more time to remove the old spout (merely for aesthetics) and attach chain. A DIY project for sure
Scritto da: Francisco Garcia
Muy resistente
Todavia no lo instalo, pero es muy resistente
Scritto da: Leslie K.
Bad fit
They didn’t fit in my eves troughs. Totally useless and too late to return
Scritto da: Shannell
Superfluous to need
As above
Scritto da: Tinus
Good
Good system for rain chains
Scritto da: Judith A
easy to install addition to the rain chain
essential addition to the rain chain

Related products

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array