POWERTEC 73010V 10-Piece Carbide Tipped Bit Set, Professional Series with 1/2-Inch and 1/4-Inch Shank Router Bits Router Bit Set, 10pc

Brand:POWERTEC

3.7/5

€
134.24

Introducing the Professional Series Carbide Tipped Router Bit (10pc) Set This comprehensive 10-piece set provides you with a high quality assortment of router bits. The router bits are uniquely designed with our signature color-coded profiles and more importantly, micro-grain carbide heads for faster, high-precision wood cutting without binding. Universal Profiles ½ inch & ¼ inch shank suitable for all major routers (for Bosch, DeWalt, Makita, Milwaukee, Porter Cable, Ryobi & Black & Decker) For your convenience, the router bits are neatly packaged and stored in the included deluxe storage case. This storage case features a clear acrylic display top and solid black acrylic base with a foam router bit tray that allows you to keep your bits secure and organized. Includes (one of each): Corebox R1/8” x ¼” V-Groove 90 degree ½” Roundover R3/8” x 5/8” Roman Ogee R1/4” x 21/32” Chamfer 45 degree 13/32” Flush Trim ½” x 1” Straight ¼” x ¾” Straight ¾” x 1-1/4” Dovetail ½” x ½” Mortise ½” x ¾” Deluxe Storage Case 8.5” x 3.5” x 4.33” (8.5”x3.5”x1.25” base) When compared to normal steel bits, these carbide cutting tools are far more effective and efficient – helping to reduce load stress on woodworking machines. They provide cleaner, straighter cuts and require less re-sharpening throughout their impressive lifespan. Together, these characteristics are intended to increase your workflow, while producing professional-looking results. POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, machines, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.

Amount

Add to Cart Buy now

EAN: 0843441120360

Categories Tools & Home Improvement, Power & Hand Tools, Power Tool Parts & Accessories, Router Parts & Accessories, Router Bits, Edge Treatment & Grooving Bits,

STORAGE CASE: Keep your carbide tips in our deluxe, reusable storage case. Both the clear top and black base are made with acrylic. CARBIDE TIPPED: Gives the heads an enhanced hardness that allows them to retain their cutting characteristics while performing longer without resharpening. FUNCTION: This complete router bit set contains the most popular profiles (straight, trimming, dovetail joinery and decorative edging) used by professionals for a wide range of routing applications, woodworking, edging, trimming, grooving and more. PREMIUM DESIGN: Each bit features a balanced construction and design that greatly reduces kickback and allows minimal vibration for clean and high precision cuts and trims. 10pc Set INCLUDES: Corebox R1/8” x ¼” | V-Groove 90 degree ½” | Roundover R3/8” x 5/8” | Roman Ogee R1/4” x 21/32” | Chamfer 45 degree 13/32” | Flush Trim ½” x 1” | Straight ¼” x ¾” | Straight ¾” x 1-1/4” | Dovetail ½” x ½” | Mortise ½” x ¾” | Deluxe Storage Case.

Batteries Required?	‎No
Country of Origin	‎Taiwan
Customer Reviews	4.7 4.7 out of 5 stars 595 ratings 4.7 out of 5 stars
Included Components	‎Corebox R1/8” x ¼” \|
Item model number	‎73010V
Item Package Quantity	‎1
Item Weight	‎2.61 pounds
Manufacturer	‎POWERTEC
Material	‎Wood, Alloy Steel
Part Number	‎73010V
Product Dimensions	‎11.81 x 4.92 x 6.11 inches
Style	‎Router Bit Set, 10pc

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Prime Lover

Smells Like Cancer

It could probably be $5 cheaper, but it beats what I was going to do getting rubber bushings/grommets and putting them in wood. Wood looks nicer, but it would have ended up costing like 3x as much plus the work lining everything up neatly etc. Some people are foolish and don't understand that you won't be able to use EVERY hole considering oversized/large bit heads... My only gripe is that it's been open for like 5 hrs and is still radiating this horrific Chinese factory smell. I feel bad actually knowing that people are enduring this right now to make this foam. It smells cancerous and hopefully gone tomorrow. Minus 1 star for putting me through this smell and mental guilt thinking about the horror people experience making it

Scritto da: Jonathan Kar

Organization at its finest

I purchased this Router Bit Tray to help in organizing my Router Bits. This Tray has made the organization of my Router Bits much more convenient! I now know exactly where they are and can easily access them when I use them! Great product!!! Great Design!!!

Scritto da: Smells really bad!!!

Smells like cat's pee

Smells really bad!!

Scritto da: Eric

Not all your bits will fir well

I ended up cutting it into sections for different things

Scritto da: Leo R Graywacz

Holes are a little tight, tough to push them in more than 1/2" deep.

I would have liked to of pushed the shafts of the bits in farther but they are a bit tight. It still supports them fine. If you want to store lots of 1/2" shank straight/flush cutters the spacing is ideal. But if you have profile bits the hole spacing is a bit close. The 1/4" holes are spaced pretty good as the OD of most of the bits aren't that large. But some of the 1/2" bits the OD is large enough where they touch each other or you have to go every other hole. If they lost 2 1/2" holes per row it would be better for spacing of the 1/2" bits, it wouldn't look as pretty as the holes wouldn't all line up but it would be more practical (for my collection). Or maybe a row or two of wider spacing for the profile bits and the existing spacing for straight/flush bits. The foam is pretty stiff but still slightly flexible. It had a slight smell when I took it out of the packaging. No labels on the foam, just on the outside of the plastic wrapper. After I put all my bits in I was surprised at how many I had collected over the years.

Scritto da: D. Morreale

Better than expected.

I was impressed with how sturdy this is. It also lets you pack a lot of bits into a small space. I'd tried making router bit racks out of wood on my drill press, but when I drilled holes with a 1/2" bit they were too tight and the router bits wouldn't fit, so I drilled them out again with a 9/16" which made them too loose and the router bits would wobble around. At that point I figured rather than spending the money to buy a 17/32" Forstener bit to try it again, I'd just give this a try, and I'm glad I did. The bits fit snuggly and don't wobble around at all, but they still go in and out easily. I plan to build a drawer to fit the tray's dimensions. Eventually, when the Router bit collection outgrows this tray, I will definitely get a second one. It might be worth mentioning, this does have a strong smell. You know that foam-plastic chemical smell? It doesn't bother me so I didn't take a star away, but I know it bothers some people. I stopped noticing it after a week or two.

Scritto da: WilliedaFish

All of my bits are now in one place.

All of my bits fit in this handy foam square. I suspect that won't always be the case; but, for now, there is ample room for both 1/2" shank and 1/4" shank bits. Incidentally, because I have both size bits, it would be handy if there were room on this doodad to store the extra collet that I install on my router table to use one or the other size. What that suggests, though, is that I really should build a cabinet with a drawer to house this tray and other drawers for accessories like the extra collets, collars, inserts and the like.

Scritto da: Steven

Great way to organize your router bits

I got tired of dealing with the little plastic cases that Freud router bits come in, they take up space, are a pain to remove and insert the router bits. This foam block consolidates all my bits into one spot thats easy to insert and remove. I like how it supports 1/4 and 1/2 inch shanks, the price is very reasonable for what you get and a lot quicker than drilling plywood to create something similar. I can insert all my router bits and pick the tray up because it securely holds the bits in place, you could even tip it over and bits wont move.

Scritto da: Eiffel

Good storage solution for 1/4", 8mm and 1/2" router bits

This is a simple yet effective way to store a fairly large collection of router bits... It holds well 1/4", 8mm and 1/2" bits -I don't have any 12mm bits to test. The spacing between the holes is fairly tight, which means it might not be possible to use every hole when using large diameter bits. The foam is fairly thick and seems to be of good quality, stiff but with enough give to insert and remove the bits easily, while holding them well. Overall the tray is a very tight fit in a Systainer -cutting the foam is strongly recommended if this is what you have in mind! I understand that holding the bits in foam is better than holding them in a wood block from a corrosion perspective, but I only started using this product a few weeks ago and can't confirm this yet.

Scritto da: Paul

Foam router bit storage- great value!

Great value router bit storage! Fits both 1/2 & 1/4” bits for drawer or storage box.

Scritto da: BlacksMYTH

Best thing ever

This is brilliant. easy to fit 1/4 and 1/2 inch shaft router bits. just happens to fit in my drawer but would be easily cut to fit into a smaller one. great bit of kit to organize your tools.

Scritto da: Aga

Five Stars

Present for my husband. He was trilled, bits finally safe and sound.

Scritto da: C. Mason

High quality foam, but very tight fit!

Generally happy that I bought this router bit tray as it looks nice, is made of very durable and dense foam, and offers a lot of storage. Only downside is how tight the fit is on router bits. With this in a drawer I didn't need it to be extremely tight fitting, if you're mounting this on the inside of a door it'll certainly work!