Red Devil 08090I RD PRO 100% Heat Resistant RTV Silicone Sealant, A Water-Proof and Weatherproof Adhesive For High-Heat Use, 10.1 oz. Tube, Red, 12-Pack 12 Pack 10.1 oz

Name: Red Devil 08090I RD PRO 100% Heat Resistant RTV Silicone Sealant, A Water-Proof and Weatherproof Adhesive For High-Heat Use, 10.1 oz. Tube, Red, 12-Pack 12 Pack 10.1 oz
Brand: Red Devil
Price: 425.37 EUR
Availability: InStock

Brand:Red Devil

3.5/5

€
425.37

FOR BEST RESULTS: Before applying the sealant, remove any old caulk, debris, or other residues that might interfere with adhesion and make sure the RTV Sealant is used on clean, dry surfaces for best results. 50-YEAR PRODUCT DURABILITY GUARANTEE: Depend on Red Devil’s Heat Resistant 100% Silicone Sealant for your projects that deal with extreme heat; the sealant remains flexible and resists vibration with impressive adhesion and provides a water-resistant seal durable for 50-years. WILL NOT CRACK, SHRINK OR PEEL: With its non-slumping design, water-proof and weatherproof formula, the RTV sealant will withstand the elements and won’t crack, peel or shrink for a dependable seal that lasts for years. RESISTS EXTREME HEAT EXPOSURE: The RD Pro Industrial Grade Heat Resistant Sealant is formulated with iron oxide to resist extreme heat exposure and withstands temperatures of 600 degrees Fahrenheit (intermittent) & 500 degrees Fahrenheit (constant). RED COLOR FOR EASY IDENTIFICATION: Ideal for use in industrial applications, the Heat Resistant Sealant comes in red and can be used on Oven Belts, Industrial Ovens, Oven Windows, Drying Ovens, Boilers, Fired Heaters, Flanged Pipe Joints, Access Doors, Heating Elements in Appliances, and Flues on Gas Appliances.

Amount

Add to Cart Buy now

EAN:

Categories Industrial & Scientific, Adhesives, Sealants & Lubricants, Silicone,

Brand	Red Devil
Color	Red
Item Weight	10.1 Ounces
Material	Silicone
Style	10.1 oz

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Aiden

Did it's job well

Needed it to temporarily seal an exhaust flange after replacing the front pipe. Mating surface on existing center pipe was corroded badly, and I couldn't get a seal. This did the trick while I waited for a new center pipe to arrive.

Scritto da: Oleg Simakoff

Perfect for tough jobs

Nothing else I tried from Lowe's or home Depot worked. This did the job! I need to glue the ceramic cooktop to the metal stove frame. I'd say my only issue is that the color is red. Other than that minor thing, I am very happy with the outcome

Scritto da: Mortimer

Good stuff

So far so good. I used this to re-attach a piece of stone veneer very near the face of my fireplace, was concerned that due to the heat other glues wouldn't stand up. During this time of year, we have the fireplace going pretty much 100% of the time. I have a thermometer on the blower grate and it often reaches close to 400 degrees; the brick I needed to attach was only a few inches away from the grate. I let the fire die down, squirted a couple blobs on the back of the brick and stuck it on. It's tacky enough the brick held itself in place while drying. Been over a week now and it's still attached firmly and we've had the fireplace going 24/7. It works! **Update 4 months later** Still holding strong! We have had the fireplace cooking non-stop since I put this stuff on. No signs of loosening up at all. **Update 3 years later** Bricks adhered with this stuff are still stuck on, it's awesome. I just came here to order another tube for a different brick that fell and thought I would update this review.

Scritto da: Amazon Adam

High performance seal for furnace inducer fan!

Purchased this to fix and create a new seal for a furnace inducer fan assembly. The fan assembly is the heart of the furnace in order to get it up and running. I replaced the inducer fan as the bearings were done. I used this product to create a tight seal to prevent the carbon monoxide and other fumes from entering the basement. In addition to a gasket, I used this to seal the base of the inducer fan assembly to prevent it from leaking anything. The product is the best and withstands 500 degrees temperature. A must for anyone working with a furnace or hot surface that requires additional seal protection.

Scritto da: Lulu1953

Strong easy to use

The glass on my induction eye slide off, instead of buying another. It is better then the one I originally bought!

Scritto da: milleeran

Barely withstood 400° after curing for a week

I am sure it has its applications 600° is not one of them

Scritto da: Ot

Its Caulking

Was very fluid, made it easy to apply, to motor heads.

Scritto da: SoNatStone

Great high temp adhesion, slight off-gas at first burn

I used this to adhere and fiber-cement surround to a zero-clearance direct vent fireplace, seems to be working just fine after several uses. The only issue is we noticed a smell that resembled a hot engine bay during the first couple times we ran the unit after using this product. It hasn't completely gone away, but it is lessening with time. Totally worth it though for the working temp range of the product.