0
0

Total:€ 0.00

See cartCheckout
LoginRegister
0

Total:€ 0.00

See cartCheckout
LoginRegister

Scratch Guard Rubber Heavy Duty Covers for Desk Protectors for Caster Wheels Chair Rolling Cart Hardwood Floor Protection Office Supplies, 10 pack, Gray

Brand:Scratch Guard

2.3/5

€
40.92

Scratch Guard Wheel Covers for Casters Wheels - Set of 10 Ball Caster Covers These heavy duty caster wheel covers convert hard wheel casters to so floor-saver wheels. Eliminate scrapes, gouges and nicks while preventing sliding and scratching. These caster feet accessories help decrease floor maintenance costs and increase floor life. High Compatibility Fits most 1-3/4 to 2-1/8 inch diameter dual wheel casters. Each package contains 10 caster covers. Made with high quality, heavy duty material for strength and durability. For best results, all wheels and covers should be replaced at the same time. This ensures universal wear and balanced, safe rolling. Best Floor Protection Increase stability and safety on desk chair wheels while also protecting floors from your moving chair as it glides around. Protect floors from wheel damage. Prevent unsightly scratches, scrapes, gouges and nicks. These useful wheel covers allow office chair wheels to roll smoothly. They can help decrease floor maintenance costs and increase floor life. Great for wooden floors, vinyl, laminate, tile, LVP and plastic chair mat. Convenient and Useful Made to fit a wide variety of caster wheels, these covers can be used on many pieces of furniture that use rolling casters. Perfect for kitchen stool with wheels, computer chair wheels, locking caster wheels, swivel caster wheels, drawer roll cart, gaming chair wheels, wheels for furniture legs, bed casters, wheeled cart, baby walker wheels, shredders with wheels, outdoor furniture and more. For safety and precaution, ensure proper fit before using. About Us Founded in 1951, Master Manufacturing provides a variety of original and innovative products and office supplies to protect you and your furniture. We offer simple solutions to everyday home and office requirements with an entire line of unique problem solving products. Our rolling chair feet covers are made in the USA.

No units available

EAN: 0885377778406

Categories Tools & Home Improvement, Hardware,

Be Safe - Stop accidents before they happen! For best results, use so wheel casters on hard floors or chair mats and hard wheel casters on carpeted areas. These rubber casters for office chairs are useful in the home, shop, garage or medical office. Multi-Surface - Decrease floor maintenance costs and increase floor life. These rubber roller wheels roll smoothly on hard floor surfaces preventing damage. Great on wood, laminate, tile, vinyl, plastic mat and low pile carpet or rug. Set of 10 - Each box includes ten charcoal caster tire covers. This provides enough covers for wheels while leaving a couple for replacement if needed. These rubber casters are easy to install and stay tight and secure. Multipurpose - These work on many furniture castors. They are made to fit 1-3/4 to 2-1/8 inch caster wheels. Use on desk chair wheels, stools with wheels, small rolling cart, furniture caster wheels, chairs with wheels, table wheels, desks and more. Caster Wheel Covers - Made for hard wheel casters these cover roller casters to provide the best protection for a hardwood floor. Protect floors from wheel damage. This set prevents scratches, scrapes, gouges and nicks caused by rolling chair wheels.
Brand Scratch Guard
Color Grey
Country of Origin ‎USA
Customer Reviews 3.2 3.2 out of 5 stars 209 ratings 3.2 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎87009
Item Weight 0.16 Pounds
Item Weight ‎2.56 ounces
Material Plastic
Product Dimensions ‎2 x 5.37 x 4 inches
Unit Count 1.00 count

2.3

5 Review
5 Star
37
4 Star
17
3 Star
6
2 Star
11
1 Star
28

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Flaneuse
Placement requires some effort for 2-inch wheels
I used these wheel covers to rehabilitate 2-inch nylon twin wheel casters hat suffered abrasions from being rolled on outdoors concrete, making them prone to scratching laminate floor surfaces. If your hands are arthritic you'll probably have a bad time putting these on. Fortunately, they provide a snug fit after placement so they don't seem likely to fall off. As the instructions state, heat them up in hot water (tap water is sufficient) so they are more pliable before putting these on larger-sized wheels. I did notice that 5 of these wheel covers had several millimeters more of material on the inner edge of the wheel cover than the remaining 5 covers, so you may need to pair them up to account for this "extra lip" so that the wheels spin freely after placement. These wheel covers provide more resistance to rolling, dampening the rolling sound and making it very difficult to move the chair while seated. In the long term, it remains to be seen if the wheel cover protection plus the reduced movement will lead to reduced scuffing of the floor. Surprised that these seem to be the only product of its type available through Amazon Prime (i.e., no multiple "unbranded" wheel covers sourced from China.) Even more surprised these are "Made in the USA" as stated on the box. Saves me the trouble of putting down a floor mat protector or buying replacement casters with polyurethane wheels and wasting otherwise usable nylon casters.
Scritto da: PF
Replaced rubber on luggage wheels
I was searching for a way to just replace the surface rubber of in-line skate wheels on a piece of luggage, but could only find the whole wheel. My roll-aboard had no way to get to the wheels, so after reading reviews I decided to try these. After soaking in almost-boiling water I was able to stretch them on and they work! We are traveling this month so we'll see if they hold up, but if we need to replace these occasionally, it's far cheaper than buying a new bag.
Scritto da: M. Patel
they fit great! Second
First, if you bought these, you bought them to same some $ and protect your floors. I had doubts that the covers would fit between the wheel and the wheel protector/housing....but after stretching out, they fit great! Second, you get what you pay for, in terms of installation frustratin and time. They will work, but you'll need to invest some elbow grease and some time to get them installed...there is no such things as a free lunch as they say. Oh, and 1+1 =2... I mistakenly ordered only 1 set to cover two chairs...you get 10 pieces, enough to cover 2 wheels per caster for a 5-pronged chair, duh! I'll have to go order another so cover the other chair....I did not order one and determine the utility before ordering another, which might be a good idea for some. Thirdly, these are made in the USA, a plus in my book. Finally. pay careful attention to the reviews about hot water. Soak these in hot water to make them more pliable, the closer to 120 deg. F the better as cooler temps will make installation hell. I suspect you can go hotter (assuming this is TPU material) but they warn against that likely to avoid scalding your hand. Also, trim your fingernails to avoid cussing out the surrounding air when you inevitably break or chip a nail. INSTALLATION: I removed the casters from the chair and worked at a table, soaking 5-6 parts at a time in a large mixing bowl. I used a turkey thermometer to estimate the temperature of the water. To make things easier, I slipped the cover on the exposed wheel end and then rotated the wheel around so that the wheel cover protector/housing will "lock" the covers in place and they won't slip out. Installation was a 3.5 on a frustration scale from 1 to 5, 1 being lego-like easy and 5 being giving up and buying actual TPU wheels/casters. Assembly time was ~ 30 minutes, and you will get more proficient as you work. It does require some significant hand dexterity and finger strength, so a smaller/weaker person will have to ask for help. USE: The wheels noise is considerably damped and the chair rolls across the floor with great grip. We have 3-inch plank cherry wood flooring. I reckon that we'll have to keep the area around the chair clean to avoid scratching the floors from dirt picked up by these covers. These also do not easily roll onto a carpet from a wood floor area...likely due to the grippy nature, but it could be my carpet setup to blame. Overall, a great idea and a good product if you want to go the cheaper route.
Scritto da: Parker
Buyer beware, description not accurate
I bought these thinking that if my caster wheels were 2", surely I could stretch these covers to fit on them snuggly as the range says 1-3/4 to 2-1/8. This despite the other reviews noting how difficult they were to put on. I assumed they were reaching the extreme end of the range at the time. Wrong. I tried putting them in hot water, holding the wheel stems in a vice, and using pliers. They're essentially thick molded rubber circles that doen't stretch at all which I'd bet is for durability. They're approximately molded for smaller 1-3/4" wheels much like you see in their pictures. It's simply not sold according to the description with the range in sizes. So beware, you'll spend $$$ shipping them to your place only to have to spend $$$ shipping them back if you don't have smaller wheels. Better to try to buy them locally before wasting your time and money on the current seller.
Scritto da: NLWPS of Amherst
Made in USA product! (Installation nightmare) Product does work for my needs.
These arrived 7 days early which was a perk. I like that they are made in the USA by a company in Cleveland, Ohio. I got these to go on 4 caster wheels on a wooden table that goes by an armchair in our living room. I just redid the floors in there so I didn't want the newly refinished wooden floors getting scratched by the casters. The table would not need to move very often but, it would be nice to easily move it. With these things on it does move just fine. Getting them on the casters was a bear of a job though. I heated them up and I don't know if the casters are slightly larger than those that go on chairs or what but man! I did two wheels (four stretchy rubbery things) and took a break. Then I returned to do the remaining two wheels. So far these things are doing their job, but the company could make a killing by selling or including some sort of tool to make it easier to stretch these things around the caster wheel to install them. The box says "Installs in seconds" Um... 900 seconds per rubbery thing maybe?!!

Related products

hot
Kwikset Juno Keyed Entry Door Knob and Single Cylinder Deadbolt Combo Pack with Microban Antimicrobial Protection featuring SmartKey Security in Antique Brass
3.7/5

€ 95.19

Kwikset Juno Keyed Entry Door Knob and Single Cylinder Deadbolt Combo Pack with Microban Antimicrobial Protection featuring SmartKey Security in Antique Brass
3.7/5

€ 95.19

hot
FJM Security 9100A-BLK-KD Disc Tumbler Cam Lock with 1-3/8" Cylinder and Black Finish, Keyed Different 1-3/8 Keyed Different
3.4/5

€ 32.06

FJM Security 9100A-BLK-KD Disc Tumbler Cam Lock with 1-3/8" Cylinder and Black Finish, Keyed Different 1-3/8 Keyed Different
3.4/5

€ 32.06

hot
Hickory Hardware P2162-SN 128mm Euro-Contemporary Pull, Satin Nickel, 7.4375" Satin Nickel 7.4375 in
3.7/5

€ 15.49

Hickory Hardware P2162-SN 128mm Euro-Contemporary Pull, Satin Nickel, 7.4375" Satin Nickel 7.4375 in
3.7/5

€ 15.49

hot
JR Products 10905 Inside L-Handle
3.2/5

€ 44.29

JR Products 10905 Inside L-Handle
3.2/5

€ 44.29

hot
Prime-Line U 9575 Door Reinforcer 1-3/4 inch Thick by 2-3/4 inch Backset 2-1/8 inch Bore, Antique Brass
3.2/5

€ 48.22

Prime-Line U 9575 Door Reinforcer 1-3/4 inch Thick by 2-3/4 inch Backset 2-1/8 inch Bore, Antique Brass
3.2/5

€ 48.22

hot
Moen Y3108CH Caldwell Pivoting Paper Holder, Chrome
3.8/5

€ 70.02

Moen Y3108CH Caldwell Pivoting Paper Holder, Chrome
3.8/5

€ 70.02

hot
Hickory Hardware HH075593-MB Bar Pull Collection Pull 3 Inch Center to Center Matte Black Finish Matte Black 3 in Center to Center
3.8/5

€ 25.74

Hickory Hardware HH075593-MB Bar Pull Collection Pull 3 Inch Center to Center Matte Black Finish Matte Black 3 in Center to Center
3.8/5

€ 25.74

hot
Hickory Hardware PA0213-MB 1-Inch Metropolis Cabinet Knob, Matte Black
3.8/5

€ 26.66

Hickory Hardware PA0213-MB 1-Inch Metropolis Cabinet Knob, Matte Black
3.8/5

€ 26.66

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array

Total:€ 0.00

See cartCheckout

Categories

All the categories
Menu Categories Near Cart

Menu