Sper Scientific 840047 3-Axis RF Meter

Brand:Sper Scientific

2.1/5

320.27

Measure the RF strength of Wi-Fi and LAN, cell phone, radio and TV transmission towers, wireless cameras and microphones. Sper Scientific's 3-Axis RF Meter 840047 measures RF (Radio Frequency) electromagnetic field strength in the frequency range of 50MHz to 3.5GHz. The 3-Axis probe provides simple, accurate, non-directional measurement from any angle. Results are displayed in large digits and a bar graph on a backlit LCD that also indicates maximum or average readings, low battery, and overload. You may set audible alarms a CAL (calibration) factor for a specific frequency or save and review up to 200 readings directly on the meter. Auto-ranging, with auto power off. Comes ready to use in a soft carrying case with belt loop, instruction manual and one 9V battery. Dimensions: 7¾" × 2½" × 2½" (197 × 64 × 64 mm) Weight: 10.3 oz (292 g).

No units available
Measure the RF strength of Wi-Fi and LAN, cell phone, radio and. Accuracy: ±2.4dB (50 MHz ~ 1.9 GHz) ±1.0dB (1.9 GHz ~ 3.5 GHz). Resolution: 0.1 mV/m|0.1 µA/m|0.001 µW/m2|0.001 µW/cm2. Range: 38 mV/m ~ 20.00 V/m|53.0 µA/m ~ 53.74 mA/m|0.1 µW/m2 ~ 1.089 W/m2|0.001 µW/cm2 ~ 108.9 µW/cm2.
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number CECOMINOD053542
Manufacturer Sper Scientific
Package Dimensions 9.49 x 5.43 x 3.78 inches; 1.01 Pounds

2.1

2 Review
5 Star
52
4 Star
0
3 Star
0
2 Star
0
1 Star
48

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Andreas Pechtold
protect yourself from high frequency EMR
Very interesting device. My WiFi access point measures 12 Volts per meter (V/m) right above and 0.437 V/m or 437 mV/m two meters away. Or in microwatts per centimeter squared (μW/cm2) = 33 μW/cm2 above and 0.031 μW/cm2 2 meters away. These values were determined by using the MAX function of the display. Bioinitiative.org determined in 2007 that 0.1 μW/cm2 was the maximum value acceptable for the public but revised that value downwards in 2014. Seeing these values I switched my WiFi off and use only the cable to the LAN network. (RJ-45 connector). I then only have the background radiation from my neighbors that amount to 9 mV/m or 0.15 μW/m2 (not measurable per cm2). The cell phone mast at my local train station emits 2.7 V/m. Around this mast (30 meters high) nature appears to be stone dead : no birds, cats insects or other sign of life). So with this meter you can investigate your own surroundings but the new frequency of 5.8 GHz can not be measured as the range of this meter goes from 50 MHz to 3.5 GHz.
Scritto da: mrwilson
Perfect for use in the mirror universe.
Seriously, what does that mean. It's printed on a sphere. Why not just indicate the directions of the axes in the actual physical directions. Instead, there's a 2d projection of a 3d reference frame that can't actually mean anything. Also, it's a LEFT HANDED coordinate system! WTF?!

Related products

hot
Extech EMF450 Multi-Field EMF Meter
2.7/5

€ 564.68

Extech EMF450 Multi-Field EMF Meter
2.7/5

€ 564.68

hot
Sper Scientific 840045 EMF Meter Standard
4.1/5

€ 164.96

Sper Scientific 840045 EMF Meter Standard
4.1/5

€ 164.96

hot
Extech EMF510 EMF/ELF Meter
2.4/5

€ 202.38

Extech EMF510 EMF/ELF Meter
2.4/5

€ 202.38

hot
Sper Scientific 840047 3-Axis RF Meter
2.1/5

€ 320.27

Sper Scientific 840047 3-Axis RF Meter
2.1/5

€ 320.27

hot
Extech 480826 Triple Axis EMF Tester
2.5/5

€ 533.40

Extech 480826 Triple Axis EMF Tester
2.5/5

€ 533.40

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array