0
0

Total:€ 0.00

See cartCheckout
LoginRegister
0

Total:€ 0.00

See cartCheckout
LoginRegister

Surebonder 9600B Pneumatic T-50 Type Upholstery Stapler Kit with 6,250 Staples, 1/4-Inch - 9/16-Inch, Carrying Case Included (Air Compressor Needed but Not Included)

Brand:Surebonder

3.8/5

€
90.02

Please note this tool needs an air compressor to operate. An air compressor does not come with the tool/kit. This user friendly and lightweight air powered stapler is a must for the DIY homeowner. You will be able to finish your projects or repairs in half the time and have fun doing it. In this kit you will receive 1250 staples of each different length: 1/4", 5/16", 3/8", 1/2" And 9/16". These are Surebonder #4 standard size heavy duty staples, same as Arrow T50 type staples. The kit also includes a high impact carrying case, An allen wrench, small bottle of tool oil and easy to follow operating instructions. The applications are endless-here are a few; upholstery, insulation, screen repair, woodworking projects, fencing repairs. Standard features include: safety mechanism that prevents accidental firing, an adjustable Air exhaust, a rubber cushioned handle for comfort, A Quick release magazine for easy staple loading, staple viewer and 1/4" Quick release connector. (Air compressor needed but not included). Use an air hose that will withstand at least 150 psi, OR 150% of the maximum pressure of the compressor. Never connect this tool to compressed air if the pressure could exceed 200 psi, as the stapler could burst.

No units available

EAN: 0735090682392

Categories Tools & Home Improvement, Power & Hand Tools, Power Tools, Nailers & Staplers, Staplers, Upholstery Staplers,

CARRYING CASE INCLUDED - Your new staple gun now comes in a durable carrying case that makes for great storage when the tool is not in use. The case includes the 9600B pneumatic staple gun, 6,250 staples in 5 different lengths, an Allen wrench, a bottle of tool oil, and operating instructions. APPLICATIONS - This staple gun can be used for a variety of projects including cabinet backs, cabinet felt, carpet padding, screen door repair, small furniture projects, insulation, roofing felt, house wrap, auto, and marine vinyl trim, light trim work, molding, picture frames, general staple use, and more. FEATURES - Staple view window, adjustable exhaust vent, easy "drop-in" staple loading, rubber comfort hand grip, and a firing safety mechanism for added protection. 6,250 STAPLES INCLUDED - The kit includes 1,250 of each of the following leg lengths: 1/4", 5/16", 3/8", 1/2", and 9/16". These staples are also compatible with the Surebonder Triggerfire stapler and the Arrow T-50 stapler. AIR COMPRESSOR NEEDED NOT INCLUDED - An air compressor is needed to operate the tool. An air compressor is not included in this kit. The PSI range for this staple gun is 60-100 PSI. Do NOT exceed 100 PSI.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Surebonder
Color Silver, Light Green, Black
Color ‎Silver, Light Green, Black
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 1,660 ratings 4.7 out of 5 stars
Included Components ‎Staple Gun, Staples, Case
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10 x 2 x 6.75 inches
Item model number ‎9600BKA
Item Package Quantity ‎1
Item Weight ‎5.59 pounds
Manufacturer ‎FPC CORPORATION
Material Metal
Material ‎Metal
Measurement System ‎inch
Number of Fasteners 6250
Number of Handles ‎1
Part Number ‎9600AKA
Product Dimensions ‎10 x 2 x 6.75 inches
Size ‎1/4-Inch - 9/16-Inch
Style ‎Heavy Duty
Warranty Description ‎90 Days from consumer purchase date

3.8

13 Review
5 Star
82
4 Star
12
3 Star
3
2 Star
1
1 Star
3

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Molokaikahu
Easy to use...just press the button
I like the simplicity of this tool and it gets the job done right!
Scritto da: Blazndeals
Stapler worked amazingly well
Used this for carpet stapling my trailer runners. Used stainless steel staples and it came out great. Not one misfire. Very easy to use and comes in a nice case. Highly recommend.
Scritto da: rbrown226
Easy to use and great quality!
I was skeptical at the price, however, it works great and is super easy to use. Helped me complete my project quickly.
Scritto da: JR
great product
I'm new at using an air stapler and this one is easy and hasn't jammed yet. I only gave 4 stars because the oil seems to leak out a lot when you set it down. I'll admit that could be operator-error.
Scritto da: Jason Wallen
works as advertised
if you're doing seat covers on a bike or atv this is the ticket! only gripe would make the length of head 1/4 longer but not a deal breaker.
Scritto da: Rf Foley
Almost 5 stars
Works like a champ. I did have one issue. Banged a hand full of staples then when not in use, air was leaking out of the exhaust. I called cust serv and was given the OK to open up the gun. The problem was as I thought. A piece of metal (vry small chip) , likely from machining the barrel had gotten into the seal and was allowing the air to pass. Not much but a hissing when the gun was sitting under pressure. The maker supplies a couple of allen wrenches so the take apart was quick and easy. The 10 minute take apart and reassemble was a lot easier than a return. For the money, nice stapler. It seems well enough made for home owners. Not sure if it would hold up to 8 hour a day use constantly, but for the amateur DIY'er, perfect gun for the price. Took a couple of practice shots to get the PSI where I wanted it but that is to be expected for any such device. And you get a bunch of different size staples. Not a bad deal.
Scritto da: Bern
Works very well
We reupholstered 8 chairs using the Surebonder staple gun. It worked extremely well and gave no problems. I put in a drop of the included machine oil in the air inlet when every new stick of staples was loaded. The recommended air pressure range of 60 to 100 psi is spot on --- below 60 psi the gun will fail to insert a staple. This tool was a bargain for the price.
Scritto da: Kramo
Worked well and without any issues
I rarely purchase a tool that is not "Top Shelf" but I really only ever saw my needing his for one job - installing insulation in a crawlspace. The review looked good and I knew I could complete the task with in the return period for Prime so I took a chance. This little stapler worked flawlessly from the first staple to the last; my guess is I used well over 3,000 staples. Every day when I started and after 3 refills I would drop 1-2 drops of oil in the air fitting as someone here suggested and it worked like a champ. It is light and maneuverable. The tip allowed me to put staples in tight places, some others I was considering looked like the tip would not allow me to maneuver as well. Most of my pneumatic nail and brad guns are Porter Cable, this is every bit as nice as those. As I said I have no idea how it would perform as a commercial installation tool but for my purposes it was a pleasure to use. The case is large enough for the tool and a wrench but it would have been really nice if it also held a decent amount of staples but i'm nitpicking here.
Scritto da: Amazon Customer
Solid gun - needed tweaking
The gun is great. The staples embed nicely and I was able to fire 30 of them off into scrap 2 by 4, the deepest staples provided, no problems. However marking this a 4, because it was not like this out of the box. This did not point to a quality issue - per say but more of a quality assurance issue. When I first used it, it fired a staple and it was perfect. Then I went to fire the second staple; nothing. tried again; nothing. Took the staple track out, and looked and the staple driving pin was bout 3 mm out into the staple track, not allowing the next staple to feed to it. It pushed back in fine. I fired a staple and then it was stuck out again. So I took it to bits a little and removed the inner piston and the staple drive pin showed a little evidence of scraping on one side - so it may not have been 100% flat, perhaps a tiny bit curved. I just rotated the staple pin so that it faced 180 degrees the other way, put it back together. Perfect. Staple after staple. Whilst in there, the bore that the piston slides in is very smooth, the parts appear to be very nicely made. Seeing the internals gives me confidence this will last a long time. Giving a 4 out of 5, not because it is not a good product, but because if anyone tried to shoot more than 1 staple in testing, they would have caught this. A non-tweak-er would likely have sent it back.
Scritto da: HRG
Excellent value - quality gun
I recovered a pool table and had to drive over a thousand T50 staples. Decided I didn't want to squeeze the manual one that many times. Bought this one. It came with 5 packs of staples so the gun really only cost about $25. After shooting said one thousand staples I can say that this is a really well made gun. Didn't misfire once. This one has a viewing window so you can see when you are running low on staples. I am not sure how well it would hold up in a commercial environment but for hobby or occasional use I highly recommend it.
Scritto da: Carloos Mtz
Excelente opción para tapizar, compacta.
Me gustó mucho es mi primer herramienta neumática, la usé para tapizar sillas, funciona muy bien no se trabó ninguna grapa puse más de 1000, llega con maletín de plástico rígido no es la gran maravilla pero cumple su función por el precio, yo compré la que viene con grapas de la marca y llegó completo unos días antes, para los que tienen acceso a tiendas o tlapalerías donde venden Truper sus grapas son compatibles (T-50) eso creo que ayuda mucho ya que son fáciles de encontrar, no tiene ajuste de profundidad eso se regula un poco desde la compresora, para tapizar está bien porque no rompe la tela, consume poca presión y aire eso también me gustó, es una herramienta muy compacta. Lo que no me gusto del todo son los acabados de la herramienta la parte de goma parece que es de otro Modelo tiene buen agarre pero visualmente si es raro, la marca solo son calcomanías, pero en general es un buen producto y lo recomiendo.
Scritto da: Dale
Not T50 compatible
T50 staples will not work in this stapler, the included ones will. So when these are gone so is the stapler. DO NOT wait to test tools until after the return date.. Amazon is good, suppliers are not as accomadating nor honest. T50 staples would jam in the slot if you force them in.
Scritto da: Justin
Works Great And Good Value!
We bought this to make some alterations to old furniture and it worked well out of the box, it does need to be oiled so make sure to oil it every use and after or it may lock up, or install a air oilier on your compressor air line and another for clean air with a hose only used for non oiled air or you will spray oil mist if you do any blowing or cleaning with air like I do. Overall this is decent for the money and the staples make it worth it if you want to be up and running right away.

Related products

hot
Surebonder 9600B Pneumatic T-50 Type Upholstery Stapler Kit with 6,250 Staples, 1/4-Inch - 9/16-Inch, Carrying Case Included (Air Compressor Needed but Not Included)
3.8/5

€ 90.02

Surebonder 9600B Pneumatic T-50 Type Upholstery Stapler Kit with 6,250 Staples, 1/4-Inch - 9/16-Inch, Carrying Case Included (Air Compressor Needed but Not Included)
3.8/5

€ 90.02

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array

Total:€ 0.00

See cartCheckout

Categories

All the categories
Menu Categories Near Cart

Menu