Thread Kits (3221-M10F Thread Repair Kit, M10 x 1.25mm x 15mm

Name: Thread Kits (3221-M10F Thread Repair Kit, M10 x 1.25mm x 15mm
Brand: Thread Kits
SKU: 0790694326103
Price: 72.90 EUR
Availability: InStock

Brand:Thread Kits

3.6/5

€
72.90

Perma-Coil helically coiled inserts are made of stainless steel wire that has been rolled to a carefully controlled thread form. When installed, Perma-Coil inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original. Perma-Coil inserts and repair kits are designed to repair stripped threads in a variety of metals. Aluminum, aluminum alloys, steel, and cast iron. If the original threads can be stripped, Perma-Coil inserts can repair them. By following the detailed instructions provided with every kit, even an inexperienced do-it-yourselfer can repair stripped threads, permanently. Repair Kit contains 12 inserts, installation tool and tap.

No units available

EAN: 0790694326103

Categories Automotive, Tools & Equipment, Thread Repair Kits, Metric Inserts & Kits,

Country Of Origin: China. Product Dimensions: 26.162 cms (L) x 5.08 cms (W) x 3.81 cms (H). Package Quantity: 1. Product Type: Auto Accessory.

Brand	Thread Kits
Brand	‎Thread Kits
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 96 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Inside Thread Size	‎M10 x 1.25
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	10.3 x 2 x 1.5 inches
Item Dimensions LxWxH	‎10.3 x 2 x 1.5 inches
Item model number	‎3221-M10F
Item Weight	‎0.35 Pounds
Item Weight	‎5.6 ounces
Manufacturer	‎Thread Kits
Manufacturer Part Number	‎3221-M10F
Material	Stainless Steel, Aluminum, Iron, Steel
Material	‎Stainless Steel, Aluminum, Iron, Steel
Metal Type	Stainless Steel, Aluminum, Alloy Steel, Iron
Metal Type	‎Stainless Steel, Aluminum, Alloy Steel, Iron
Product Dimensions	‎10.3 x 2 x 1.5 inches
Thread Size	M 10
Thread Size	‎M 10

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Mickey Mouse

Works great, excellent product.

First, Perma-Coil is made in the USA. I'm retired but worked for 11 years as an automotive mechanic. As a mechanic I use Heli-coil brand inserts. They worked fine, however I never liked their plastic insertion tool. Perma-Coil has solved this issue, their insertion tool is steel. Otherwise it works identically as Heli-Coil inserts. I don't think Perma-Coil was around when I turned wrenches 25 years ago, but it's nice that they are here now. Also if you are wondering, yes, they can be stacked. Also liked that these were slightly longer than heli-coils. if you're not in a hurry it may be cheaper on eBay. But you know how the scenario always goes, Gotta have it now!. So Amazon got me out of a jam with next day service. My wife is happy that her car is back on the road.

Scritto da: Allen M.

Local mechanic shop cross threaded and used loctite on bolts...

Awesome quality products, no need to spend more money on the other brand. I took in my car to have a rear engine mount replaced. The folks at the local auto shop went ahead and replaced it but cross threaded 2 of the 3 bracket mounts and added some loctite for me. Needless to say I was not pleased. I drilled out the aluminum holes with a 11/32 bit, threaded them with the provided M10x1.25 (add cutting oil or some lubricant when doing this), and threaded in the Permacoil (hammered out the little pin) and torqued the bolts to spec. Very pleased with the product.

Scritto da: Liam1694u

Lifesaver!

I had a whole series of rusted out mounting holes for a trailer hitch. I could get them cleaned up at all. I bought this and a 13/32 drill bit (hardened) and was able to fix them better than new. Extremely easy to install if you take your time. Remember to use cutting oil or something like WD-40. Make sure you are aligned and level on all both axis (keep it straight). Back up a 1/4 or 1/2 turn every 1 to 1-1/2 turns to properly remove the burr. Clean out the tapped hole with a brush or compressed air before installing the coil. I also add a dab of Locktite before installing as well.

Scritto da: Deirdra A. Ballard

Work like they are supposed to!!

As a professional shop, worked perfect first time.

Scritto da: Eric

Would be 5 star product with better instructions

Product worked great, however be advised it comes with virtually no instructions. If this is your first time using this type of tool you are going to need to find instructions or a youtube video to show you how to use it. I did find a helpful youtube video so problem solved for me. But the manufacturer really should provide better instructions or at least a link to an instructional video in the product description. Also you need a specific size drill bit (I think 13/32) that is not included.

Scritto da: Matt Armstrong

Works well, costs less.

This is a standard "wire" type thread repair kit. The kit is significantly less expensive than the best known brand but performs just as well. The included drill and tap performed well and my thread repair went off without a hitch.

Scritto da: Bob Baust

Worked great, a quality tool that does what it should.

I was a little hesitant to use the plastic guide because it required a good bit of effort to thread the coils into it, but there were enough coils in the kit that I figured I'd give it a try. To my surprise the guide worked perfectly for the two coils I had to insert. I did nothing special to align the tool with the threaded hole but both coils inserted without a hitch.

Scritto da: Josh M

Just as good if not better than Helicoils!

Needed to replace threads for my exhaust manifold studs. I have always used Helicoils but went with these because of the cost difference and I am really glad I did. Well made, tap worked perfectly. Didn't come with drill bit, this wasn't a deal breaker, I am used to Helicoils not coming with them either. You need a 13/32" x 5-1/4" bit to get the job done. I will be using these in the future.