Tsumura 375ZR2 Standard Guide Bar with 0.325 Pitch, 0.058 Gauge and 72 Drive Link Chain, 18" Length Standard 18" Bar .058 x .325 in.

Brand:Tsumura

3.6/5

€
128.06

This is a new TsuMura 18" Professional Guide Bar that is .325 pitch, .058 gauge and uses a 72 drive link chain, this bar works great on Jonsered, Husqvarna and other brands. This bar works on Husqvarna models 45, 50, 55, 133SG, 136, 137, 140, 141, 142, 154, 234, 240, 242, 243, 246, 254, 340SE, 345, 350, 346, 350, 353, 455 plus many more, it also works on Jonsered models 49SP, 50, 51, 510SP, 520, 525, 535, 2045, 2050, 2141, 2145, 2150, 2152, 2245, 2250 plus other models. Fits: DOLMAR models: 112, 113, 114, 116, 116si, 117, 118, 119, 120, 120 Super, 120si, PS-510, PS-540, PS-5100S, PS-5105, PS-5105H, PS-6100, PS-6100H, PS-6800i but to run this bar on these models your saw must be equipped with a .325 pitch sprocket! Replaces Oregon guide bar number 188RNBK095 TsuMura guide bars have the reputation of being the highest quality guide bars made today! They were sold for 40 years under the TOTAL SUPER bar name. Made from the finest quality, high-carbon tool steel. Sprocket Tips feature large-diameter sprockets encased by heat-treated carbon steel. Solid one-piece milled high-carbon steel bar that has a brushed steel finish. Rails are precision-ground to uniform tolerance. Longer tip reduces chain "hammering" of bar rails for longer bar life. The TsuMura Pro "ZR" tip has been engineered to provide long service life, with a thick sprocket and strong cogs that stand up to hard use and extreme temperatures. The sprocket tip is firmly held by three rivets and is recessed into the bar body for excellent stability and accurate chain feeding.

Amount

Add to Cart Buy now

EAN: 4580592253979

Categories Patio, Lawn & Garden, Industrial & Scientific, Outdoor Power Tools, Replacement Parts & Accessories, Chainsaw Parts & Accessories, Accessories,

Package Weight: 5.0 pounds. The sprocket tip is firmly held by three rivets and is recessed into the bar body for excellent stability and accurate chain feeding. Sprocket Tips feature large-diameter sprockets encased by heat-treated carbon steel. Solid one-piece milled high-carbon steel bar that has a brushed steel finish. Rails are precision-ground to uniform tolerance. Longer tip reduces chain "hammering" of bar rails for longer bar life. The TsuMura Pro "ZR" tip has been engineered to provide long service life, with a thick sprocket and strong cogs that stand up to hard use and extreme temperatures. This is a new TsuMura 18" Professional Guide Bar that is .325 pitch, .058 gauge and uses a 72 drive link chain, this bar works great on Jonsered, Husqvarna and other brands. This bar works on Husqvarna models 45, 50, 55, 133SG, 136, 137, 140, 141, 142, 154, 234, 240, 242, 243, 246, 254, 340SE, 345, 350, 346, 350, 353, 455 plus many more, it also works on Jonsered models 49SP, 50, 51, 510SP, 520, 525, 535, 2045, 2050, 2141, 2145, 2150, 2152, 2245, 2250 plus other models. Fits: DOLMAR models: 112, 113, 114, 116, 116si, 117, 118, 119, 120, 120 Super, 120si, PS-510, PS-540, PS-5100S, PS-5105, PS-5105H, PS-6100, PS-6100H, PS-6800i but to run this bar on these models your saw must be equipped with a .325 pitch sprocket! Replaces Oregon guide bar number 188RNBK095 TsuMura guide bars have the reputation of being the highest quality guide bars made today! They were sold for 40 years under the TOTAL SUPER bar name. Made from the finest quality, high-carbon tool steel.

Country of Origin	Japan
Is Discontinued By Manufacturer	No
Item model number	375ZR2
Manufacturer	Tsumura
Package Dimensions	22.4 x 3.5 x 0.3 inches; 5 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: james baker

24" .325 .058 bar.

So far so good! I have this on my 550xp mark ii, it's makes huge difference verse the 20" stock bar that came with the saw. I had it 5 or 6 months now. Haven't had any problems with it. I am a full time arborist, the saw is used 5-6 day a week. The bar has held up to all the task I've put it up against. Having a smaller but powerful saw up a spar like the 550xp is nice. It's a great deal better with the 24" bar. Also the bar is wider than husqvarnas, which makes lining up your face cuts a lot easier. I heard the tips had problems and failed quote frequently but that isn't the case that I have seen. I would say that most of the issues I have heard about, would have to do with user errors.

Scritto da: Oak Valley

Great Product

Buy this bar once and you’ll never need another one. High quality product!

Scritto da: Mabonleon

Superb bar!

Top quality bar, tight tolerances, and lighter than a regular bar of equal size. Not cheap, but you get what you pay for.

Scritto da: James W GeFellers

Great bar...horrible nose sprocket

I did a great deal of research prior to buying two of these bars for my saws I use in my business. I was confident with all the raving reviews that they would be a great fit for our needs. However, I've been sorely disappointed. The bar itself appears to be built very sturdily with high-quality materials, and I cannot say a bad thing about the bar. We hadn't used the first bar for more than 10 hours when it tore up. I was limbing the lower limbs on an eastern red cedar to gain access to the base of the tree to cut it down. As I bumped a small limb, the saw SLIGHTLY kicked back and the chain would no longer turn. I checked to make sure the chain brake was disengaged and it was. Closer inspection showed that the roller bearings in the nose sprocket has come out and wedged between the outer layer and the sprocket completely locking it down. I contacted the seller and he was VERY nice and sent me a new sprocket tip a no charge. I replaced the tip and figured I was good to go. Nope, the new tip didn't last 5 hours. I contacted the seller again, and he gave me several pointers about what might be causing the issue. Wanting to like this bar, I ordered another tip, replaced the chain, and replaced the rim sprocket so that every component was brand new. The result...another tip that did the exact same thing in about 20 hours of use. I want to like this bar better, but until a more durable nose sprocket is developed for professional use, I will not be buying anymore Tsumura bars. As a comparison, we've used Stihl and Husqvarna bars for hundreds of hours, and with proper maintenance we have only had one other nose sprocket go out...after 250+ hours of use. Hope this helps someone make a more informed buying decision

Scritto da: Stan Halat

Worth the extra money

First time useing this bar and am impressed with it. Strong steel, light and strong tip.

Scritto da: Timothy M.

Nice!

In my opinion these are the best bars made !

Scritto da: Diezel

Appears to be well made.

Appears to be well made, will update this review after a few months cutting. ????

Scritto da: T. Black

HAVE USED AND BOUGHT MANY OF THIS BRAND LIGHT WEIGHT AND STANDARD BAR THEY ARE TOP NOTCH

LONG WEAR LIGHT WEIGHT GOOD LOOKS PRO BAR WHAT IS NOT TO LIKE ...KEEP THE BAR TIP GREASED , THE OILING PORT CLEAR .....AND CARRY ON FOR YEARS