Turning Point Propellers 21431730 Hustler 4-Blade Aluminum Propeller for 40-150 HP Engines with 4.25" Gearcase - 13.25" x 17", Right Hand Prop LE1/LE2-1317-4 , Black , 2X-Large

Brand:Turning Point Propeller

3.3/5

203.88

Turning Point Propellers LE1/LE2-1317-4 Hustler 4-Blade Aluminum Propeller for 40-150 HP Engines with 4.25" Gearcase is a right hand propeller and has a 13.25" diameter and a 17" pitch. The Prop that put the “four” in Performance! Turning Point’s Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150 HP applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests. The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.

Amount
Add to CartBuy now
Propeller Number: LE1/LE2-1317-4. Diameter: 13.25"; Pitch: 17". Right Hand Propeller. For 40-150 HP Engines with 4.25" Gearcase. 4-Blade Hustler Series Aluminum Propeller.
Brand ‎Turning Point Propeller
Customer Reviews 4.3 4.3 out of 5 stars 63 ratings 4.3 out of 5 stars
Item model number ‎21431730
Item Weight ‎5.6 pounds
Manufacturer ‎Turning Point Propeller
Manufacturer Part Number ‎21431730
Model ‎21431730
Product Dimensions ‎13.25 x 6.75 x 14.25 inches

3.3

8 Review
5 Star
61
4 Star
17
3 Star
14
2 Star
5
1 Star
4

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: JJ
Good Prop
Put on a 2019 Tracker Pro Guide V175 with 115 Mercury FourStroke. Overall, I like the prop. I get on plane much quicker and it didn't affect my top speed or fuel economy. It was really easy to install and everything is included with the hub kit. My only complaint so far is that one trailing edge on one of the blades was very rough. It wasn't bad enough to worry with sending it back. Otherwise, I am quite impressed with the performance and it was cheaper than the comparable Mercury prop.
Scritto da: Juli R. Lacina
could not get the right pitch for 115hp mercury
The difference between 15 and 17-in pitch was huge. One resulted in inability to hit a reasonable RPM at wide open throttle and the other redlined under 30 mph. My three blade 17-in pitch topped out at 47 mph right at max RPM . I couldn't get anywhere near that with the four blade 17 pitch. I was about 700 RPM under maximum topping out at about 36 mph and tweaking the trim... I was hoping dropping to a 15 Wood get me back up to wide open throttle right at the top of my RPM range. My RPM range maxed out at 29 mph with a 15 pitch... way too slow for a good slalom ski. had to return both.
Scritto da: Anthony R. Johnson
Plug and Play
I wasn't sure what the big deal was until I installed it on the boat. My boat gets onto plane almost instantly and for cruising you can keep the rpm's down. Not sure about the gas savings yet but I'm sure it's doing better as I don't have to peg the throttle anymore. So far I love this prop.
Scritto da: Adam Robinson
Drag
Great product but not for my boat
Scritto da: Heidi Osborn
As advertised
Everything stated in the description of this prop is accurate. I am completely satisfied with this prop. My only complaint would be that my boat pulled to the right. However this was a simple fix with the trim tab on my out drive. Improved hole shot, plane out time at much slower speed , turning and backing. The slow speed maneuverability has improved as well. I Would recommend to anyone who is looking for an improvement in these areas. I did however loose a few MPH of top end. But with a 2.3 OMC cobra I’m not surprised and it’s no big deal for me. I’m more of a cruiser than a speed junky. Definitely a strong step up from a three blade with the same pitch and diameter.
Scritto da: Huckster79
Buy it! Quit looking at other props!
Awesome prop, amazing performance!!!!!! Hole shot is now insane, no time to plane- by time I have the throttle buried we are on plane even with a full boat. My old 3blade prop ventilated if I wasn't careful even on normal turns- I can now turn sharp with little problem and even if I downturn too sharp and it starts to ventilate it seems to catch water again before I can back off the throttle. Noticeable difference in the metal-I wondered if "forced casting" was just marketing spin but wen I hit my old prop w my finger I get a thud. Went I flick this one it rings like a bell. I would definitely recommend! Besides being 1/5 of the cost of stainless you aren't putting your lower unit at risk. I did loose about 1mph top end but the take off and no ventilation is definitely worth 1mph especially if you are using it for water sports. Shipping was insanely fast
Scritto da: KGB
4 Blade prop
1st pop on my boat is a 3 blade hustler great performance and still going strong after over 10yrs. Wanted to give the 4 blade design a try and keep my 3 blade as a back up. Out with back surgery, but will update the performance once I get on the water. I have no doubt it is going to work like a champ.
Scritto da: clubberL87
Noticeable difference
17.5 ft Alumacraft 115 Yamaha 4 stroke, much improved on plane and improved turning.

Related products

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array