Wayne 57333-WYN4 SEL50 1/2 hp Thermoplastic Sewage Pump with Piggyback Tether Float Switch, Black

Brand:Wayne

3.5/5

€
452.79

PRODUCT DESCRIPTION This 1/2 HP WAYNE Sewage Pump is well suited for harsh conditions because of its reinforced thermoplastic construction. The SEL50 can accommodate both a 2 in. and 3 in discharge making it a flexible solution. This pump is assembled in the USA for performance that lasts. It is easy to use and will deliver dependable performance – warrantied for 1 year. Able to pump up to 10,000 gallons per hour. FROM THE MANUFACTURER A WAYNE SEL50 Sewage Pump is an automatic pump used when water being pumped contains solids up to 2" in diameter. A common application is pumping waste from a bathroom to a sewer or septic line.

No units available

EAN: 0040066201256

Categories Tools & Home Improvement, Rough Plumbing, Water Pumps, Parts & Accessories, Sewage/Effluent Pumps,

Bottom suction design passes solids up to 2 inches large. Piggy-back tether float switch for automatic or manual operation. Combination 2 in. / 3 in. Npt discharge capable of handling up to 2 in. Solids. 1/2 hp; max. Flow rate is 10000 gallons per hour; 7200 gph at 10 ft. Of discharge lift. Reinforced, corrosion-resistant, thermoplastic submersible sewage pump.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Wayne
Brand	‎Wayne
Color	Black
Color	‎Black
Customer Reviews	4.5 4.5 out of 5 stars 84 ratings 4.5 out of 5 stars
Horsepower	‎1.00
Included Components	‎Wayne SEL50 WAYNE 1/2 hp Thermoplastic Sewage Pump With Piggyback Tether Float Switch
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	12 x 8.5 x 15.4 inches
Item Dimensions LxWxH	‎12 x 8.5 x 15.4 inches
Item model number	‎57333-WYN4
Item Package Quantity	‎1
Item Weight	21.04 Pounds
Item Weight	‎21 pounds
Item Weight	‎21.04 Pounds
Manufacturer	‎Wayne
Material	Plastic
Material	‎Plastic
Part Number	‎SEL50
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎12 x 8.5 x 15.4 inches
Style	Submersible
Style	‎Submersible
Voltage	‎100 Volts
Warranty Description	‎1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: ATDM

Absolute brute

Pumpzilla!!!! I am so hard on these pumps and they take the abuse. winter, summer, leaves, sand, crap. Etc…Very high flow….. I’ve purchased 3 inn15 years.

Scritto da: Francis E. Berkey

Installation went so well, it was done by my wife. PS: Age 88

This unit was a direct replacement for the one that for the one that failed. We replaced the disintegrated steel sump lid with a plastic one that should last forever.

Scritto da: James

works great

quieter than our old one.

Scritto da: Jcmyhope

Piece of junk! Impeller fell off

Piece of junk ! Cheap plastic impeller fell off after two years, see photos. Maid with junk by by the CCP in China, I know everything is made in China but this time I purchased a all cast iron unit from a different maker.

Scritto da: kb

Strong Pump

I purchased this Wayne 57333-WYN4 SEL50 1/2 hp Thermoplastic Sewage Pump as a replacement for a cast iron pump used to circulate water. The run of my water line is 20 feet using 1 inch diameter tubing with a rise of 15 feet and the water flow is quite strong. This device is being utilized all year round in temps typical for the Mid-Atlantic. I've been impressed with the strong water flow. There is no delay when the on/off float is triggered. I've had the pump for 6 months now and hoping it will last for years.

Scritto da: rdhutch2

Simple and easy installation.

I replaced a similar Wayne pump of the same horsepower with this pump. This pump is much lighter in weight than my first one. The first pump lasted eleven years. Since the new pump has been in operation for only about two months I cannot speak to the longevity of this one but I bought it based upon the longevity and performance of the first one. Setting the pump is the easy part, the plumbing is more difficult. I am 80 years old and managed to successfully install the pump and so far it is operating as well as my original.

Scritto da: Jason M.

Perfect fit for replacing the same.

Went with Wayne because first unit was a Wayne. It lasted 16 years with off and one usage for basement condensation water and one sink. Only unit I could find with 3 inch discharge. Old unit had stainless steel impeller but this one does not. Longevity has yet to be seen but installed since May 2020. We shall see.

Scritto da: Joe Wells

OVERKILL

Purchased this to replace a burnt out unit that was not even known about until the backup into the yard began. Suffice it to say I bought this due to the head pressure and overall GPM; which seemed sufficient due to the unknown of hole depth and if there were any solids. Surprisingly the old unit was only about a foot and a half down in a basin. The as-built drawings for the system left a lot to be desired, but i was able to replace and have been please so far. Only issue i have is not setting the float lower.

Scritto da: Dan

Four Stars

Very well made