E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, M6-1.0 Internal Threads, M10x1.5 External Threads, 10.49mm Length, Made in US (Pack of 5)

Name: E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, M6-1.0 Internal Threads, M10x1.5 External Threads, 10.49mm Length, Made in US (Pack of 5)
Brand: E-Z LOK
SKU: 0839137001020
Price: 40.14 EUR
Availability: InStock

Brand:E-Z LOK

4/5

€
40.14

E-Z LOK threaded inserts for metal provide an easy to use solution for repairing or reinforcing threaded holes in metal. Ideal for use in metals like aluminum and cast iron, E-Z LOK threaded inserts are screw machined out of solid steel for greater strength and superior pull out resistance. Standard external threads permit the use of standard drills and taps for installation. Once the hole is prepared, E-Z LOKs are threaded into the hole like an ordinary fastener using a screwdriver, bolt and jam nut, or optional E-Z LOK drive tool. E-Z LOKs are self locking and will not back out or vibrate loose. A preapplied adhesive activates upon installation and bonds to virtually all metals. Fastener-ready in minutes, the adhesive seals against liquids and gases to pressures of 6,000 psi. when fully cured (72 hours).

No units available

EAN: 0839137001020

Categories Industrial & Scientific, Nails, Screws & Fasteners, Threaded Inserts, Thread Locking Inserts,

Made in America - Strong, Solid Construction Design. Ideal For Soft Metals Like Aluminum, Cast Iron, or Magnesium. Self Locking; Preapplied Adhesive Activates Upon Installation and is Fastener-Ready in 3-5 Minutes. Install With Standard Drill & Tap; NO Special Tools Needed. Easy to Use Solution For Repairing Damaged Threads in Metal.

Exterior Finish	Black Phosphate
Fastener Type	Thread Locking
Is Discontinued By Manufacturer	No
Item model number	450-6
Manufacturer	EZ-Lok
Material	Steel
Metal Type	Aluminum, Alloy Steel, Carbon Steel, Iron, Magnesium
Thread Size	M6 x 1

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: El mas ondeado

Triple check for treat,tap sizes

i use ez coil to reinforce walls on a aluminum block which had a broken screw ,fits perfectly

Scritto da: Anthony Frisco

saved my transmission!

I bought a used transmission from the junk yard that had a couple pan bolts stripped so I needed to repair them because transmission fluid was leaking out. I started of buying a cheap helicoil repair kit on ebay and tried using that first. if you are considering buying an ebay kit yourself do yourself a favor and DON'T! what started as a simple repair turned into a nightmare when the very tool that is supposed to fix threads destroyed them even more. boy was I in a pickle because now not only were the threads screwed up but now the hole was also bigger than it should. I was running out of options! luckily in my search for solutions I came a crossed these clever and yet simple inserts. These inserts are quality and don't need any of the expensive specialty tools that other common thread repairs do. I was able to fix the destroyed threads quickly and easily with just these inserts, a screwdriver, a common drill and bits, and regular tap set. they work great! no more stripped threads and no more transmission leak! what a relief! I definitely recommend them especially if you've already tried other thread repairs that didn't work and you think it might be beyond repair.

Scritto da: Lou

Good

Good product. Worked as expected

Scritto da: Steven L.

Much better than helicoil

After having a failed helicoil installation, these are much better and where I start with next time. No special tools needed, just the right drill bit size, which I got from HF.

Scritto da: Ryan

They worked perfectly for my application ????

This was the answer to my problem. Had a bolt break off in the crankcase on a quad. I wasn't able to get an easy out to work after drilling it and attempting unsuccessfully to back out the remaining threads. I started researching solutions and found these little beauties! I would highly recommend these.

Scritto da: F joe biden

drill size

these worked great. Had a stripped out bolt hole on the oil plate of a VW, drilled out installed this EZlock .All Good! a metric drill bit is probably your best bet , but if you only have sae bits ,an 11/32" works perfectly.

Scritto da: Tyler

Perfect fix!

These are the perfect fix for stripped out threads! Much better than a Helicoil and way cheaper than a Timesert. Worked great! You won't regret these.

Scritto da: Ernest E. Marks

perfect for aluminum thread repair

I repaired a helicoil repair gon bad on a 1981 Honda XL500R. It worked great. I believe this is the only way to go fo aluminum thread repair.