GEARWRENCH 114 Pc. SAE/Metric Ratcheting Tap and Die Set - 82812 114 PC Set

Brand:GEARWRENCH

3.8/5

€
455.25

PRODUCT DESCRIPTION This complete set of SAE Standard and Metric GEARWRENCH taps and dies is perfect for the master mechanic or machine shop that has a wide variety of threading needs. 48 taps and 48 dies provide you with any necessary size, and our tools are designed from the ground up to bring GEARWRENCH innovations to our hard working users, like the 5 ratcheting head of our T handles or the patented Twist Lock guide system that secures any extension or cutting tool to the handle, producing straight threads on every cut. AMAZON.COM Complete set of ratcheting T handle system of tap and die tools (view larger). The 114-piece GearWrench Tap and Die set (model 82812) is ideal for use in tight, confined areas, and the patented Twist Lock Guide System reduces backwalk of die guide and keeps dies centered while cutting threads. The ratcheting T wrench provides a 5-degree ratcheting arc, and its reversible lever allows for quick changes from forward to revers to eliminate hand-over-hand turning. WHAT'S IN THE BOX 82800 large ratcheting T wrench, 82801 large locking tap adapter, 82802 large hex die adapter, 3881 medium ratcheting T wrench, 3883, medium tap adapter, 3882 small tap adapter, 3884 medium die adapter, 82803 male extension adapter, 82804 female extension adapter, sliding T for adapters, 4mm hex key, 5 screw extractors, metric thread gauge, SAE thread gauge, 48 taps and 48 dies ABOUT GEARWRENCH Since launching the original patented 50 ratcheting wrench, GearWrench has continuously led with breakthroughs in pass-through ratchets, sockets, screw/nut drivers, pliers, and specialty tools. No matter the industry you find yourself in, GearWrench has the tools to fit your needs -- from the precise to the nearly indestructable. GearWrench hand tools are warranted for life to be free of defects in material and workmanship. 82812 114 PIECE LARGE COMBINATION TAP AND DIE SET AT A GLANCE * Patented Twist Lock Guide System reduces backwalk of die guide * Auto locking feature allows for safe removal of tap adapter * Reversible lever eliminates hand over hand turning * Carbon steel construction * Lifetime warranty FROM THE MANUFACTURER Gear wrench 114-Piece large ratcheting tap and diet set SAE/metric, consisting of: 82800 large ratcheting T wrench, 82801 large locking tap adapter, 82802 large hex die adapter, 3881 medium ratcheting T wrench, 3883, medium tap adapter, 3882 small tap adapter, 3884 medium die adapter, 82803 male extension adapter, 82804 female extension adapter, sliding T for adapters, 4mm hex key, 5 screw extractors, metric thread gauge, SAE thread gauge, 48 taps and 48 dies. Complete set of 48 taps and 48 dies, plus small, medium and large system of ratcheting T handles, locking tap adapters and hex die adapters. Taps and dies are made from high quality carbon tool steel. Gear wrenches ratcheting -I handle systems are perfect for the master Mechanic or Machine Shop. Set comes with blow molded case for safe and organized storage. See more

No units available

EAN: 787721817901

Categories Tools & Home Improvement, Power & Hand Tools, Hand Tools, Taps & Dies, Tap & Die Sets,

Drive extension adapters provide greater access in confined areas when used with 3/8inch Drive Extensions. Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm. Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories. Ratcheting t wrench works with GEARWRENCH pass thru socket system. Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting. Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎As Shown in the Picture
Country of Origin	‎Mexico
Customer Reviews	4.7 4.7 out of 5 stars 3,959 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Full Polish Chrome; taps & die are untreated
Included Components	‎
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎82812
Item Package Quantity	‎1
Item Weight	‎1.3 pounds
Manufacturer	‎GearWrench
Material	‎Steel
Measurement System	‎SAE & Metric
Part Number	‎82812
Power Source	‎Hand Powered
Product Dimensions	‎21 x 13 x 3 inches
Shape	‎Rectangular
Size	‎114 PC
Style	‎Set
Usage	‎Professional
Warranty Description	‎No Warranty - Consumable

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: OZ4

Works Great

Works as advertised!

Scritto da: nick radakovich

Value

Where I work taps are important an the quality is a must

Scritto da: Kenn

6 years and counting

Had these for six years and use them all the time as I restore a classic beetle to chase threads and other small projects. It’s a great set. The ratcheting handles are great, it’s all of great quality. Love this set.

Scritto da: Whilly whips

Worked great

Worked great as expected!

Scritto da: Tex

A great set with a lot to offer for this home-user.

I had read the reviews here before purchasing and especially took note of the people that reported some gouges in some of the machined taps with this set. I ordered anyway for a couple of reasons. First, this is no small company. It is part of Apex Tools that owns Lufkin Tapes, Crescent Tools, Wiss cutting tools, Nicholson Files and more etc that go back over 100 years. I have all of those tool Brands at home and they have served me exceptionally well for 30-40 years. So, I figured I'd give this set a go and if it was totally unacceptable, I could always return it (thanks to Amazon's service). Bottom-line, its not going back... I'm a home/hobbyist user of Tap and Dies, but I can understand why a Professional who uses these tools in a daily business setting can feel differently about what they need. But for my use at home, this is a great set, and for what you get, a very good price. I could not touch an equally configured Irwin/Hansen set for this price point. I have also used this set and it does a very acceptable job for my needs. Regarding the reports of the small gouges in some of the larger Taps, yes I have those too. But it is only on a couple of the Taps, the gouges are small, and the gouges are not on the cutting edges of the Taps. The cutting edges are clean, in tact and sharp. The very few gouges are on the threaded following surfaces, so that problem (for me) will not affect the tool's ability to cut proper threads. I did find that I needed to clean out a few loosely attached burrs from a couple of the Taps when they were machined. A small brass brush or even the "thread gauges" that come with this set easily dispatched those burrs. I have already used some of the Taps and they cut very well. The accessories that come with this set are quite remarkable and they work well too. I especially like the Tap Adapters that come with this set and they way they lock into the T-wrenches. My only complaint about the T-wrenches is that I can't lock the ratchet into place. You either go forward or backward via the selector flip/switch. If you have done much tapping of harder metals, you know that going forward and back quite often is needed to dislodge the burrs that you cut. I can accomplish it with the flip-lever, it would just be easier (at times) if the T-wrench didn't ratchet. But for cutting soft metal, I love that ratchet and the ability to move the handle without changing my grip is very appreciated. Overall, I think this set is a winner. I understand that it is not an Irwin/Hansen or even higher quality set. But for my use, that is OK and I expect to get many years of use from this set. I already have a much smaller, very cheap quality Tap and Die set that I've owned for 30+ years. Take care of your tools, use some finesse vs brute force, use cutting fluid, etc. and you can get many years even from a lesser quality Tap and Die set. :^) One update (4/23/16): I also purchased the Gator Tools V-Tap Guides that help keep the tap vertical (especially when starting the threads). The Gator Tools Tap Guide is a well made/machined part that earns a full 5-stars all by itself. Unfortunately, for this particular Tap set from GearWrench, on their smaller Taps (the Metric M5 and smaller) and (the Standard #10 and smaller), these Taps will not pass through the Big Gator Tools Tap Guide. That is because GearWrench makes the barrel (above the cutting portion of the Tap) slightly larger. Because of that design on their smaller Taps, it prevents the Tap from passing through the Big Gator Tape Guide. I've looked at these sizes in the Irwin Taps and it appears that Irwin maintains the barrel diameter so that it is not larger than the cutting portion diameter of the Tap. If something like this is important to you, then it may be worth considering Irwin vs GearWrench. I'm still happy with my GearWrench set and have some older Taps that will pass through the Big Gator tool just fine. Just thought I'd mention it as a difference for those considering this GearWrench set.

Scritto da: 338 Lapua Shooter

Good kit and good value

I purchased this kit about 5 years ago because I didn’t want to bring my snap on tap and die set to my shop where they would surely get lost or stolen by my staff. I didn’t have exceedingly high expectations of the kit but to be honest it’s just as good. As with any set you need to use a light cutting oil and as such I always use a thin oil. Over the years I have broken many bits and pieces of these types of kits, even my snap on ones and they always replace them…. But I have yet to break one of these. When I got my snap on brand products I was in the aftermarket automotive industry so I used them on a more routine basis, but now shifting careers to firearms I use different thread patterns and mostly the smaller ones which are far more prone to break, but these never have broken. To be entirely honest I paid almost half the price that they currently are selling for right now and since they’ve worked so well for me I’d have zero hesitation to buy a new set should I need them. The “big truck” brands I don’t think are any better and surely not worth the inflated cost which is likely 3-5 times as much as this kit. You’ll be happy with the kit.

Scritto da: Dexter See

Very good

Very good

Scritto da: Dustie Rose

High quality at a cheap price

For $210 I am extatic. This 114pc set performs just as good as my Snap-On set that has only HALF of the contents as this 114pc set and is twice the price. The ratcheting tap handles are elite, definitely a game changer when it comes to tight spots. Overall, I am very impressed with how these tap and die perform on both mild, stainless, and even aluminum. I would highly recommend this set to anyone.

Scritto da: ali

Very good

Great quality, love the ratchet

Scritto da: Laurence

Would love a refund or replacement

There seems a lot of play in the ratchet mechanism, and the ratchet direction lever has little resistance so when your removing the tap quickly the ratchet leaver keeps changing direction on its own account, this is extremely annoying,

Scritto da: Aivaras Ceida

Useless thing

Complete peace off ... Second time i used it and the centre ratchet mechanism fell out and i lost pressure spring

Scritto da: Mixx Cheang

Amazing!!

Very sharp and precise, bought a set of lang and did not fix a cross tread bolt almost snap the tool. Return it and bought gw tap and die set and work perfectly. Very happy with that tool safe a lot of time with the right tools.

Scritto da: MECANO

MECANO

bonjour l'outil est bien fait pour les endroit étroit merci.