Oregon 14-inch PowerSharp Starter Kit with Bar, Sharpener, and 52 Drive Link PowerSharp Chain, 3/8" Low Profile, .050" Gauge, Portable Sharpening Tool for Chainsaws (541652)

Brand:Oregon

3.2/5

€
101.40

For rapid and effective sharpening of your chainsaw chain, choose Oregon’s PowerSharp Sharpener Starter Kit. The easy-to-use sharpening kit lets you sharpen quickly on the saw, without having to remove the chain - saving you time in the field. Lightweight, three-piece set includes a guide bar designed for PowerSharp, the PowerSharp chain and the PowerSharp bar-mount sharpener. Go from dull to sharp in as little as three seconds. Enjoy highly portable, accurate and ultra-fast sharpening in seconds. PowerSharp clamshell sharpener is only to be used with Oregon PowerSharp bars and chains. • Oregon chainsaw sharpening set - uses 52 drive link PowerSharp chain (PS52) • Pitch/Gauge: 3/8" low profile / 0.050 • Bar length: 14 inches (35cm) • Tail mount: A041 • Fast, easy to use, portable, precise and tough • Sharpen on the saw in as little as 3 seconds • Available in a wide range of sizes to fit your specific model • Universal sharpening system for a variety of makes and models • Sharpening stone included with the combo • Compatible with many models from the following brands: Craftsman, Cub Cadet, Dolmar, Echo, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, Olympyk (Oleo-Mac), Poulan/Poulan Pro, Power Pruner/Echo Power Pruner, Stihl, Redmax, Ryobi. Saw chain identification: Always refer to the number stamped on the drive link of your old chain to assure correct gauge and pitch, or refer to your owner’s manual. You will also need to know your chainsaw cutter type and sequence, in order to order the correct part to fit your saw chain. • Chain Gauge is the Drive Link's thickness where it fits into the guide bar groove, matching the guide bar gauge. • Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket.

No units available

EAN: 0036577516613

Categories Patio, Lawn & Garden, Outdoor Power Tools, Replacement Parts & Accessories, Chainsaw Parts & Accessories, Accessories,

Ideal for professionals or homeowners: Suitable for both commercial users and DIY. Includes a guide bar designed for PowerSharp, chain, and the PowerSharp bar-mount sharpener with sharpening stone. Oregon premium PowerSharp chainsaw chain sharpener: For chainsaws with a 14" (35cm) bar; included chain is 52 drive link, 3/8-inch pitch low profile and 0.050-inch (1.3 mm) gauge PowerSharp chain. Replace your bar and chain with the PowerSharp starter kit. Then, use the sharpener to sharpen your chain on the saw in seconds. Sharpener is only for use with Oregon PowerSharp bars and chains. Fits many popular chainsaw models with 14" bar, including, but not limited to, Echo CS310 and Homelite ZR43100. Includes 1 x Guide Bar, 1 x PowerSharp chain and 1 x Sharpener. Sharpens your chain on the saw in seconds. Fast, easy, portable, precise, tough: Ultra rapid chain sharpening in a lightweight tool. Sharpening stone is included with the combo.

Brand	Oregon
Chain Type	Low Profile
Compatibility Options	For saw sizes up to 42 cc
Country of Origin	USA
Customer Reviews	4.2 4.2 out of 5 stars 226 ratings 4.2 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	No
Item Length	26.25 inches
Item model number	541652
Item Weight	2.5 pounds
Manufacturer	Oregon Tool
Product Dimensions	26.25 x 1.5 x 5.37 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: B. Newman

GREAT alternative for those that hate to sharpen chains.

The Oregon PowerSharp Bar/Chain/Sharpener system is great for people that don't like to sharpen chains. I would probably get motivated on chain sharpening, if i used a chainsaw daily or weekly. But for occasional chainsaw usage, the PowerSharp system works out very well.

Scritto da: Gary W.

Top only

Stone will only dress the top of the blade and not the cutting edge.

Scritto da: Park Manager

A+ Super Awesome

This is the future of chainsaw sharpening. It's so easy and only takes 3 seconds to sharpen your chain. You need to replace the chain and diamond stone together, but the chain has a lot of meat on it. The yellow sharpener will last forever, and the diamond stone inside is replaceable. The Oregon PowerSharp system is by far the fastest and easiest way to sharpen your chan, and file down your depth gauges at the same time. I'll never go back to manual chain sharpening. I've been using the PowerSharp system for a few years, and it is the best way to keep your chain razor sharp--period. Best practices is never hit dirt or earth with your chain, and you won't need to sharpen your chain that often. But if you accidentally do hit dirt, 3 seconds in the PowerSharp system will make the chain as sharp as it was from the factory. PowerSharp is a game changer, and I'll never go back to manual files, or grinders ever again. PowerSharp is magnitudes easier and faster. I upgraded all my chainsaws to the PowerSharp system. This system requires the PowerSharp chain with the inverted chain bevel that is included in this kit. Always replace the diamond stone and chain together. Works on most Oregon chainsaw bars. The yellow sharpening system just needs to attach to the hole in the tip of the bar. Plunge the bar into the stone in the yellow part at full speed, and it sharpens the chain in 3 seconds. Trust me. You'll never manually file a chain ever again after using the Oregon PowerSharp system.

Scritto da: Chris M.

Big time-saver, negligible compromise in cutting efficiency to acheive it

At first I was concerned about a loss in blade efficiency in this new design (surely the inward-only sharpenable blades made their sacrifice for a reason, right?). This was especially on my mind because I use an electric Ryobi 40v (brushless) chainsaw where efficiency matters. Happily though, use of the chain put my concerns aside. The speed it cuts is equal to a high quality normal chain, and the extra drag on the motor was much less than I had expected (though there is a slight but detectable difference in the motor sound and amount of work per charge). The efficiency difference really is easily worth my time or money in new blades, services, or sharpening. Ultimately, because I will be keeping the blade sharp more often, the efficiency is superior (just not right out of the box). Another way I can tell that this is a good chain, is by the shavings it produces relative to other quality chains when new. These are all sizeable and whole without any evidence of over-bite (though I think it is a tad more than the equivalent standard type chain), for as long as the blade remains sharp (which by my standards is still longer than 5 battery charges). If you don't already buy quality chains, this will be the best chain you have owned anyway.

Scritto da: Biff44

Works pretty well

I was-pleasantly surprised that this actually works. I have an EGO chain saw that i cut brush and other dirty wood with. The chain was dulling too quickly. Switched to this sharpener, and was cutting thru some stumps, and it kept me going. You have to change to the bar provided, as the sharpener would not fit the ego bar ( hole too small). I like it

Scritto da: Vincent C. Peterson

Best Yet.

Best product I have purchased in a long time. Work perfectly.

Scritto da: Mike D

the seller is AWESOME. Very fast delivery

First thing first, the seller is AWESOME. Very fast delivery. No problems there. Now onto the product --- it's basically junk. My father has been a small engine mechanic for the better part of 40 years. He's seen everything. He's seen the gimmicks, and this is exactly what it is. If you look at this chain, the teeth are actually pitched up a bit to allow the sharpening stone to grind them down a bit to sharpen it. This actually works well, but here are my words of caution: If you only cut wood (and you know you won't hit a rock, nail, or anything that isn't soft like wood), this will probably work OK. When I tested a brand new normal chain to this chain, I could tell the difference, but it wasn't anything unbearable. For the ease of sharpening its a decent compromise. But if you hit anything else with it, there is a very real possibility you knock the teeth right off this chain. I know, because it happened to me. I hit a nail in a 2x4 and the chain became a pile of useless metal. To sum it up ... this is a light duty chain for very light duty work. Hitting anything but wood is basically a death sentence to this chain.

Scritto da: My Eyes Are Up Here!

For the rest of my life I will only buy a chainsaw that fits this product

I'm using this on my 40v Ryobi battery chainsaw. I'm never going to sharpen a chain the old way again. If this saw dies before me, I'll make sure that whatever I replace it with can take a self sharpening system like this. Not only is this fast (3 seconds) but it gets the chain way sharper than I could with a file. Whoever invented this system needs to win the Nobel prize for...uh... forestry or whatever category this fits into.

Scritto da: SI 4248US Guy

Great concept but not for rookies.

High kickback potential, rookies leave the sharpener on at all times and you'll be safe, haha. Cuts like a full chisel pro chain. Great for repetitive simple cuts such as cutting firewood bucks right before splitting. I wouldn't recommend taking it into the bush or working near the ground. Don't try anything that might damage any individual teeth or you'll have a heck of a time until they've all worn down to the same ones you damaged. Chains are twice the price but seem to be worth it for the convenience (in the right application)

Scritto da: Wesley Rideout

Good Product

I have not installed it yet, but bought it for a new chainsaw. I had one for years on a saw I have given to my son and found it a good product. When my chain got dull it just took a couple minutes to get going again with a chain that cut like new

Scritto da: James

Chain keeps coming off

Thought it was a good buy at first, but the chain constantly jumps off the bar and is unsafe.

Scritto da: jean-pierre poulin

Très satisfait

Rapidité d’expédition Exactitude du produit

Scritto da: Jeremy snook

and is super sharp. will be buying again

the chain and bar worked perfectly. and is super sharp. will be buying again.