Segal SE 27600 Entrance Mortise Lockset, 2-1/2 inch Backset, Wrought Solid Brass, Satin Nickel Satin Nickel Right-Handed

Name: Segal SE 27600 Entrance Mortise Lockset, 2-1/2 inch Backset, Wrought Solid Brass, Satin Nickel Satin Nickel Right-Handed
Brand: Segal
SKU: 0018418276009
Price: 184.02 EUR
Availability: InStock

Brand:Segal

3/5

€
184.02

These heavy-duty entrance Mortise lock sets are constructed of various materials and come in a satin nickel finish. They are designed for use on exterior entry doors, engineered to match the vintage hardware used on the interior doors, without jeopardizing the security of your home. These security lock sets can be installed on entry doors ranging from 1-3/8 in. To 1-3/4 in. Thick, and with the Segal keyway lock cylinders featured in these Mortise lock sets, together with the heavy-duty construction of the internal case and components, you can enjoy the beauty of yesterdayft.s vintage hardware with the strength of modern day security hardware. The knobs of these lock sets are constructed of die-cast and reinforced steel components, and theyft.re finished off with a beautiful wrought, solid, polished brass finish. The solid brass interior trim plate is smaller in size to the exterior trim plate, and it includes a rocker switch to engage the exterior knob function. It measures 2-1/4 in. Wide by 7 in. Tall, with a steel reinforced backplate at the knob area. The mounting hole centers for the interior trim plate measure 1-1/8 in. Wide x 5-15/16 in., center to center. The exterior trim plate measures 2-3/4 in. Wide x 10 in. Tall, and its mounting hole centers are spaced at 1-13/32 in. By 8-3/4 in. On center. Both the knob and the key cylinder are mounted through the exterior trim plate. This lock set includes an 1/8 in. Thick strike plate where both the deadbolt and latch engage into the same rectangular opening, with mounting holes spaced apart at 4-D/8 inches. A Gray plastic dust box is also included for installation beneath the strike plate. As an increased security feature, this lock set features a split spindle knob system designed to prevent breaching of hardware from the exterior side of the door. The spindle half with the female threading and cross pin inserts from the exterior, while the spindle half with the male threading inserts from the interior side of the door. The knobs fasten to the spindle pieces with the set screws found on each knob shaft. Although the handingft.s of these lock sets are reversible (instructions included), there are matching lock sets available with opposite handed latches ready for installation. Detailed, simple to follow installation instructions are included with each entrance Mortise lock set.

Amount

Add to Cart Buy now

EAN: 0018418276009

Categories Tools & Home Improvement, Hardware, Door Hardware & Locks, Door Knobs,

5-1/4 in. tall and 3-3/8 in. width. All installation fasteners are included with each entrance mortise lock set. Steel reinforced knobs include a wrought solid brass construction (in satin nickel finish), solid brass trim plates and faceplate (also in satin nickel finish), steel strike with Zamak case. Satin Nickel finish. 2-1/2 in. Backset, 1-1/16 in. X 7-5/8 in. Faceplate, 9/16 in. Latch projection, 1 in. Deadbolt projection, 2-1/4 diameter knobs. This right-handed Lockset can be used on entry doors of 1-3/8 in. to 1-3/4 in. thick to match interior vintage style hardware.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Segal
Brand	‎Segal
Color	‎Satin Nickel
Country of Origin	‎China
Customer Reviews	3.9 3.9 out of 5 stars 183 ratings 3.9 out of 5 stars
Finish	‎Polished
Finish Type	‎Polished
Handle Material	‎Alloy Steel, Brass
Included Components	‎Entry Door Mortise Lockset
Item Dimensions LxWxH	1 x 3.5 x 11 inches
Item Dimensions LxWxH	‎1 x 3.5 x 11 inches
Item model number	‎9086637
Item Package Quantity	‎1
Item Weight	‎4.26 pounds
Item Weight	‎4.3 Pounds
Lock Type	Key Lock
Lock Type	‎Key Lock
Manufacturer	‎Prime-Line Products
Material	Brass, Nickel, Steel
Material	‎Brass, Nickel, Steel
Number Of Pieces	‎2
Part Number	‎SE 27600
Product Dimensions	‎1 x 3.5 x 11 inches
Shape	‎Rectangular
Size	‎1 Pack
Style	Right-Handed
Style	‎Right-Handed

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: Mark newell

Awesome replacement for Mortise-style lock for older houses.

My older Russwin brand mortise lock had worn out (house was built in 1941) and it used a non-standard key (could not make a copy anywhere local). Locksmiths all quoted ridiculous prices to replace my existing lock (several hundred dollars). Replacing the door was even more money (several thousand dollars). I took my old one out, measured it, and was able to find its replacement for a fraction of what the local locksmiths wanted. (Thank you Amazon!) Its very sturdy and well made (its heavy --- very solid construction), has a nice finish, and was a simple drop-in replacement for my door. Please be aware that all mortise-style locks are not physically identical for thickness/offsets/etc. I had to take my old one out of the door, measure everything (lock depth/height/offsets/etc) and then find a brand and model that matched. If you don't do this, you will be unhappy when the new one does not fit... I am very happy with my purchase and recommend this brand.

Scritto da: C. Silva

Direct replacement for my old door

Fit directly in my old door slot and it's good for the money and easy to install, but the screw on the door knob constantly unscrews itself and has to be retightened. Also, would be nice to have a key number to have matching keys for the rear door as well, which is not provided.

Scritto da: Clifton Park, NY customer

Door may be just a little too thick for this lock set.

It was a bit difficult. Door might have been a little too thick. We finally barely got the barrel to screw in and then it s didn’t quite work right. We left it in because it was better than a hole in the door for the time being. Basically just acts like a prop.

Scritto da: MdGlamDesigns

Great Value

This is a great value. Other metal set costs $350+. This aligned perfectly with the existing strike plate and mortise opening. I had to make slight modifications with a wood chisel. After finally figuring out how to unscrew and remove the old set, remove the key lock from the new set, installation was a breeze! Please note that the plate is made of thin metal (likely aluminum) but all other pieces are heavy metal and very sturdy. This set is interchangeable for right-hand or left-hand door. Directions were easy to follow with diagrams and instructions in various languages.

Scritto da: MaryFlorida

Set screws back out knob unscrews off

The set screws back out and the knob unscrews all the way off, and people can get stuck inside the room unless they have a screwdriver or something handy to push the latch so it opens

Scritto da: amazon_princess

Door is just a bit too thick for this lock

Like another reviewer, I need to replace a mortise lock for want of a thumb-turn on an ancient door. This set was nearly a match-- the knob, lock & thumb-turn holes all lined up fine. But the door itself is just a bit too thick, so that it was not possible to install the cylinder using the exterior face-plates given, so I returned it. The old lock had nearly flat face-plates. Otherwise, it seems like a decent consumer-grade lock-set. Not commerical-quality, but it's not priced for that either so OK. I'd have kept it if it fit.

Scritto da: Bret A. Scott

Nicely built lockset, and relatively easy to install

I've owned my house for 8 years, and it hadn't occurred to me until a few days ago to figure out the kind of lock set that was intended for an exterior storage door missing its locks. Amazon led me towards mortise lock sets, and with a few measurements, to this particular model. I was able to "mostly" install it within an hour, and completely install it in less than 2 hours. Installation was sped up by the purchase of an uncut key blank at Lowe's, which I used as something to grasp to screw the lock cylinder in to the lock body. All of the necessary screws and gaskets were in the package, and if replacing a similar piece, a Phillips screwdriver may be the only tool you'll need. Lock operation is smooth, and it's good to know that spare keys can be made easily. I'll say appearance is a 7 out of 10... quite nice for its price point, but not a substitute for Baldwin or other premium mortise sets.

Scritto da: Johnathon K.

Knob set screws backing out

I liked I found a combo of a mortise door handle with the lock of a modern door would give a higher rating but the 2 of the 4 set screws for the know would keep coming loose no matter how much I've tighten them down.