0
0

Total:€ 0.00

See cartCheckout
LoginRegister
0

Total:€ 0.00

See cartCheckout
LoginRegister

Stens New Flat Idler 280-242 Compatible with/Replacement for John Deere 100 Series GY20110, GY20629, GY22082

Brand:Stens

3.7/5

€
47.86

Stens Heavy Duty Flat Idler

No units available

EAN: 0023899301010

Categories Industrial & Scientific, Power Transmission Products, Pulleys, Idler Belt Pulleys,

Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging. Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order. Compatible With/Replacement For: John Deere: 100 Series. Replaces OEM Numbers: John Deere: GY20110, GY20629, GY22082. Specs: Description: Flat Idler, Height: 1 3/4", ID: 11/16", OD: 5 1/8", Material: Metal, Heavy Duty: TRUE, For explanation of letters, refer to the drawing by clicking on More Info, Made By: An OEM Supplier, A:: 5 1/8", B:: 4 1/4", C:: 11/16", D:: 1", F:: 1/4", H:: 1/4", V:: 1 3/4".
Country of Origin USA
Is Discontinued By Manufacturer No
Item model number 280-242
Manufacturer Stens
Product Dimensions 12 x 10 x 12 inches; 1.25 Pounds

3.7

13 Review
5 Star
75
4 Star
19
3 Star
4
2 Star
1
1 Star
1

Write your review

Your email will not be published. All mandatory fields are marked with*

Scritto da: Gregg
Fit good
Same quality as stock part
Scritto da: Amazon Customer
It looked good and works well.
I was a good replacement part and value.
Scritto da: Richard Maddern
Great product, good price, fast service - thanks
Great product, good price, fast service - thanks
Scritto da: Walter H.
good fit
good value
Scritto da: Twitchell, PhD Voc Ed
it seemed very good to me
Found the bearing in this flat pulley worn when tuning up my mower deck. This is not an original equipment pulley. However, it may be of higher quality; it seemed very good to me. Whenever you have your mower off the tractor, it would be a good idea to check both flat pullies for bearing wear. With two new spindles and one new flat pulley my mower makes a good deal less noise than the engine on my John Deerea LA115 garden tractor and with new wheels and sharpened blades it cuts smooth as a dream.. PS This is also a good time to check the brakes on each V pulleys that mount to the mower blade spindles. This is my second deck on my LA 115 John Deere garden tractor. On both decks, the factory setting wore out one of the brakes long before the other was worn. If you adjust them so they both engage at the same time, it will stop the mower blades better and keep the wear even. These brakes are required by federal law to stop the mower blades rapidly anytime the mower is stopped. *Helps to keep foolish people from losing fingers and toes.
Scritto da: ScotD
Direct-fit replacement
This fits like OEM, didn't have to change the belt to a different size.
Scritto da: FlyingDutchMan
Made in USA!
Made here, that I like! Great product, better than OEM John Deere, theirs had some play in the bearing, this one 0 (zero) play. What else can I say, I would go for this one every time.
Scritto da: Amanda Hales
USA made
Better quality than OEM
Scritto da: marc jackson
Very stiff bearings not free spinning at all.
Don’t buy these. I purchased 2 of them and both have cheap bearings with which I can assume have no grease. I installed on my John Deere tractor and burned off 2 belts within one hour of use each. The pulley doesn’t free spin and is very stiff causing lots of heat to the belt which in turn wrecked my brand new belt.
Scritto da: Joe
Good value
Works great on my JD LA145
Scritto da: Catherine
Perfect!
Item works and fits well!
Scritto da: Shotgun- Amazon Customer
Perfect replacement Idler Pulley
Perfect fit on my John Deere La165 with the 48" Edge Cutting Deck... Great price and well made..
Scritto da: Donna Wood
Idler pulley worked perfect
the perfect size, and easy to install

Related products

hot
Stens New Flat Idler 280-242 Compatible with/Replacement for John Deere 100 Series GY20110, GY20629, GY22082
3.7/5

€ 47.86

Stens New Flat Idler 280-242 Compatible with/Replacement for John Deere 100 Series GY20110, GY20629, GY22082
3.7/5

€ 47.86

hot
NIBCO QT763 X 1/2 Quarter Turn Angle Sillock - Cup
3.7/5

€ 48.99

NIBCO QT763 X 1/2 Quarter Turn Angle Sillock - Cup
3.7/5

€ 48.99

hot
AJ ANTUNES - ROUNDUP 7000851 Idler Bearing Assembly Kit
0.1/5

€ 137.65

AJ ANTUNES - ROUNDUP 7000851 Idler Bearing Assembly Kit
0.1/5

€ 137.65

Discover our international network

We ship to 28 countries, over 200,000 products. Stay updated, subscribe to the newsletter.

Array

Total:€ 0.00

See cartCheckout

Categories

All the categories
Menu Categories Near Cart

Menu