SP Ableware Cane Valet Cane Holder (703240050)

Name: SP Ableware Cane Valet Cane Holder (703240050)
Brand: SP Ableware
SKU: 0742645010715
Price: 42.41 EUR
Availability: InStock

Brand:SP Ableware

1.5/5

€
42.41

This cane holder is used for hanging or wedging a cane, and is a small, plastic fitting that mounts on the cane to hold it on a table edge when not in use. The holder snaps onto the cane, and slides up or down to contact the top or bottom of the table, and is versatile for using in pairs to contact both table top and bottom. A small rubber band can be placed around the end hooks for maintaining a better grip on the cane shaft. The holder measures 8.5 x 4.0 x 1.0 inches (L x W x H). (L is length, the horizontal distance from left to right; W is width, the horizontal distance from front to back; H is height, the vertical distance from the lowest to highest point.) Ableware specializes in home healthcare and rehabilitation products for the senior, disability and rehab markets. We have been recognized as the largest manufacturer in the United States of Aids for Daily Living (ADL). Ableware continues to design and manufacture products that increase mobility, maximize independence and enable people to live more rewarding, dignified and enriched lives.

Amount

Add to Cart Buy now

EAN: 0742645010715

Categories Medical Supplies & Equipment, Mobility & Daily Living Aids, Mobility Aids & Equipment, Canes, Crutches & Accessories, Cane Accessories, Cane Holders,

Versatile for using in pairs to contact both table top and bottom. Snaps onto cane, and slides up or down for contacting top or bottom of table. Small, plastic fitting for mounting on cane to hold it on table edge when not in use. Small rubber band can be placed around end hooks for maintaining better grip on cane shaft. Holder for hanging or wedging a cane.

Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	703240050
Manufacturer	MADJI
Product Dimensions	2 x 2 x 0.75 inches; 0.8 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Write your review

Your email will not be published. All mandatory fields are marked with^*

Your rating

Scritto da: D.J.

Spend Most Of Your Time Worrying About It Falling

'Barely' worked. Surprisingly (to me anyway), every table/desk I tested this on had a beveled edge. This product does not do well with beveled edges because this product has to reach so far to get past the beveled part to get to the actual 'top' of the table that only a very small part of this product is actually touching the top of the table. So this makes the cane swing very far under the table, which means the cane is at about a 45 degree angle, which means that this product is at about a 45 degree angle and therefore VERY close to slipping off the table. My dad and I had to place it absolutely perfectly on the table so there would be no swinging at all when we let go, otherwise it would slide off. And even when it didn't slide off, it sure acted like it was ready to slide off at any minute. The material wasn't a grippy, rubber type material like would be expected either. It was actually fairly smooth (which increases slipperiness). This was very surprising. There were two of these slats included in the package and they suggested trying one slat above the table and one below, that was supposed to hold it a bit tighter by kind of gripping the table. Well two problems with that... 1) Different tables have different thicknesses so you'd have to adjust one of the slats when you sit at different tables, and 2) When I tried this, it didn't help. If the slats were a bit longer, or they put rubber grippers under the slats, or it was made out of a rubber-like material, it'd probably work better. But my experience was that my dad would spend more time worrying about it falling on the floor than he would spend finding a place to prop his cane up in the first place. Can not recommend it.

Scritto da: DK

There are two in the package.

I bought two because the description says "The holder" (singular) and the reviews say you need a pair. There are two in the package so now I am stuck with an extra pair. I will update the review after I see how they work.

Scritto da: BettyL

Tabling your Cane

This product works fairly well; however, you really need TWO! You leave space between the two--as shown on the product page; this clamps between the top and bottom layer of a table & is adjustable as to thickness.

Scritto da: Carl Franklin, JD/PhD

Good for those who use a cane or walking stick.

Works just like the advertisement. I tried using a single rubber piece, and it worked okay most of the time. With two in place you get a lot better grip. I also use an aluminum walking stick that I purchased years ago when I would go hiking a lot. This piece has actually been very helpful for me on a hiking trail. I can put the walking stick on a nearby tree branch of other "flat" surface to keep from laying my instrument on the ground.

Scritto da: Brumby Mcgehee

Doesn't work

One half of it will often hold a cane on a counter if the flat side of it is down.

Scritto da: Steven Fuller

This is a terrible product it fell of the cane with in the ...

This is a terrible product it fell of the cane with in the first hour of use and was lost due to breaking

Scritto da: Bernie Saunders

The Cane Valet/Cane holder is a great thing. When you slide it on to the ...

The Cane Valet/Cane holder is a great thing. When you slide it on to the table it stay there or at a counter it will stay there, etc. Thank you.

Scritto da: AlliFlowers

Does not work

Does not work. Too short to put around a table and actually hold the cane immobile.